BBB Industries 211-0108 Rack and Pinion Assembly
Manual Rack and Pinion for Toyota Tercel
Restore steering response with this remanufactured rack and pinion assembly from BBB Industries Reman Rack and Pinion. Part number 211-0108 is built for manual steering applications and fits 1991-1997 Toyota Tercel models with the confirmed vehicle-specific dimensions and tie rod configuration listed below.
- Remanufactured rack and pinion assembly for manual steering
- Fits 1991-1997 Toyota Tercel, manual steering
- Inner tie rods included; outer tie rods not included
- Rack length: 44.125 in. (1120.775 mm)
- Input shaft diameter: 0.654 in. (16.619 mm)
- Input shaft length: 5.688 in. (144.463 mm)
- Turns lock to lock: 3.813
- Pressure and return ports: not applicable
BBB Industries Reman Rack and Pinion
The BBB Industries Reman Rack and Pinion line focuses on remanufactured steering components built to match the original application layout. This 211-0108 rack and pinion assembly is specified for manual steering, with inner tie rods included and no bushings or outer tie rods listed. For Toyota Tercel steering repair, the measured rack length, input shaft dimensions, and lock-to-lock ratio help confirm application match before installation.
This part cross-references Monroe Shocks & Struts (e.g., 19320200) for the same application.
Common Steering Problems It Can Address
- Excessive steering play in a 1991-1997 Toyota Tercel
- Rough or inconsistent steering effort in manual steering systems
- Internal wear in the rack and pinion assembly
- Leaking or damaged steering gear components where replacement is required
- Incorrect steering response caused by worn inner tie rods
Installation Notes and Fitment
Fits 1991-1997 Toyota Tercel, manual steering. Verify the input shaft diameter, input shaft length, and rack length against the original unit before installation. Because outer tie rods are not included, reuse or replace those components as needed during the steering repair. Confirm that the vehicle uses a manual steering setup, since pressure and return ports are not applicable on this assembly.
Quality Assurance
This is a remanufactured BBB Industries steering component built for the listed Toyota Tercel applications. Part number 211-0108 is identified for direct application matching with the confirmed fitment data provided.
Original: $388.17
-65%$388.17
$135.86BBB Industries 211-0108 Rack and Pinion Assembly
Manual Rack and Pinion for Toyota Tercel
Restore steering response with this remanufactured rack and pinion assembly from BBB Industries Reman Rack and Pinion. Part number 211-0108 is built for manual steering applications and fits 1991-1997 Toyota Tercel models with the confirmed vehicle-specific dimensions and tie rod configuration listed below.
- Remanufactured rack and pinion assembly for manual steering
- Fits 1991-1997 Toyota Tercel, manual steering
- Inner tie rods included; outer tie rods not included
- Rack length: 44.125 in. (1120.775 mm)
- Input shaft diameter: 0.654 in. (16.619 mm)
- Input shaft length: 5.688 in. (144.463 mm)
- Turns lock to lock: 3.813
- Pressure and return ports: not applicable
BBB Industries Reman Rack and Pinion
The BBB Industries Reman Rack and Pinion line focuses on remanufactured steering components built to match the original application layout. This 211-0108 rack and pinion assembly is specified for manual steering, with inner tie rods included and no bushings or outer tie rods listed. For Toyota Tercel steering repair, the measured rack length, input shaft dimensions, and lock-to-lock ratio help confirm application match before installation.
This part cross-references Monroe Shocks & Struts (e.g., 19320200) for the same application.
Common Steering Problems It Can Address
- Excessive steering play in a 1991-1997 Toyota Tercel
- Rough or inconsistent steering effort in manual steering systems
- Internal wear in the rack and pinion assembly
- Leaking or damaged steering gear components where replacement is required
- Incorrect steering response caused by worn inner tie rods
Installation Notes and Fitment
Fits 1991-1997 Toyota Tercel, manual steering. Verify the input shaft diameter, input shaft length, and rack length against the original unit before installation. Because outer tie rods are not included, reuse or replace those components as needed during the steering repair. Confirm that the vehicle uses a manual steering setup, since pressure and return ports are not applicable on this assembly.
Quality Assurance
This is a remanufactured BBB Industries steering component built for the listed Toyota Tercel applications. Part number 211-0108 is identified for direct application matching with the confirmed fitment data provided.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Manual Rack and Pinion for Toyota Tercel
Restore steering response with this remanufactured rack and pinion assembly from BBB Industries Reman Rack and Pinion. Part number 211-0108 is built for manual steering applications and fits 1991-1997 Toyota Tercel models with the confirmed vehicle-specific dimensions and tie rod configuration listed below.
- Remanufactured rack and pinion assembly for manual steering
- Fits 1991-1997 Toyota Tercel, manual steering
- Inner tie rods included; outer tie rods not included
- Rack length: 44.125 in. (1120.775 mm)
- Input shaft diameter: 0.654 in. (16.619 mm)
- Input shaft length: 5.688 in. (144.463 mm)
- Turns lock to lock: 3.813
- Pressure and return ports: not applicable
BBB Industries Reman Rack and Pinion
The BBB Industries Reman Rack and Pinion line focuses on remanufactured steering components built to match the original application layout. This 211-0108 rack and pinion assembly is specified for manual steering, with inner tie rods included and no bushings or outer tie rods listed. For Toyota Tercel steering repair, the measured rack length, input shaft dimensions, and lock-to-lock ratio help confirm application match before installation.
This part cross-references Monroe Shocks & Struts (e.g., 19320200) for the same application.
Common Steering Problems It Can Address
- Excessive steering play in a 1991-1997 Toyota Tercel
- Rough or inconsistent steering effort in manual steering systems
- Internal wear in the rack and pinion assembly
- Leaking or damaged steering gear components where replacement is required
- Incorrect steering response caused by worn inner tie rods
Installation Notes and Fitment
Fits 1991-1997 Toyota Tercel, manual steering. Verify the input shaft diameter, input shaft length, and rack length against the original unit before installation. Because outer tie rods are not included, reuse or replace those components as needed during the steering repair. Confirm that the vehicle uses a manual steering setup, since pressure and return ports are not applicable on this assembly.
Quality Assurance
This is a remanufactured BBB Industries steering component built for the listed Toyota Tercel applications. Part number 211-0108 is identified for direct application matching with the confirmed fitment data provided.
