Beck Arnley 180-0563 Engine Crankshaft Position Sensor
Engine Crankshaft Position Sensor for GM Applications
Beck Arnley 180-0563 is an engine crankshaft position sensor built to match foreign nameplate OE specifications for form, fit, and function. It is a direct-fit replacement for a wide range of Chevrolet, GMC, Cadillac, Buick, Pontiac, Saab, Hummer, and Isuzu applications, including Silverado, Sierra, Tahoe, Yukon, and Corvette models.
For drivers diagnosing crank signal faults, hard starting, or intermittent stalling, this Beck Arnley crankshaft position sensor provides the OE-style fit needed for a proper repair. The 180-0563 part number is used across many GM platforms, including 2000-2006 Chevrolet Tahoe and 2001-2006 GMC Sierra 2500 HD applications.
Key Features
- Engine crankshaft position sensor for ignition system repair
- Built to Beck Arnley OE specifications for form, fit, and function
- Supports direct replacement on many GM trucks, SUVs, and performance cars
- Fits select Chevrolet Silverado, GMC Sierra, Cadillac Escalade, and related models
- Part number 180-0563 for easy catalog matching
Detailed Description
Beck Arnley sources parts to meet the requirements of foreign nameplate OE applications, and this crankshaft position sensor follows that approach with a fit and design intended for confident installation. It is used in ignition and engine management systems where accurate crankshaft position input is required for timing and engine operation. This part cross-references AC Delco (e.g., 213-354, 213-352) for the same application.
Compatible With 1997-2005 Chevrolet Corvette, 1998-2002 Chevrolet Camaro, 2000-2006 Chevrolet Tahoe, 2001-2006 Chevrolet Silverado 2500 HD, and 2000-2006 GMC Yukon. It also fits many other listed GM vehicles, including Cadillac Escalade, Pontiac GTO, and Saab 9-7x applications.
What This Sensor Helps Address
- Crankshaft position sensor fault codes
- Hard starting or extended crank conditions
- Intermittent stalling or engine cut-out
- Rough running caused by inaccurate crank signal input
- No-start conditions related to crank signal loss
Installation Notes and Tips
Verify the connector orientation and terminal locating tab before installation, especially on 2007 Silverado and Sierra applications noted with the locating tab in the terminal on the top right. Confirm the exact year, make, model, and engine configuration against the vehicle listing before replacement. Inspect the harness and connector for corrosion or damage during service.
Quality Assurance
Beck Arnley parts are sourced to OE-style specifications for proper form, fit, and function. This sensor contains lead, so follow applicable handling and disposal requirements during service.
Beck Arnley 180-0563 Engine Crankshaft Position Sensor
Engine Crankshaft Position Sensor for GM Applications
Beck Arnley 180-0563 is an engine crankshaft position sensor built to match foreign nameplate OE specifications for form, fit, and function. It is a direct-fit replacement for a wide range of Chevrolet, GMC, Cadillac, Buick, Pontiac, Saab, Hummer, and Isuzu applications, including Silverado, Sierra, Tahoe, Yukon, and Corvette models.
For drivers diagnosing crank signal faults, hard starting, or intermittent stalling, this Beck Arnley crankshaft position sensor provides the OE-style fit needed for a proper repair. The 180-0563 part number is used across many GM platforms, including 2000-2006 Chevrolet Tahoe and 2001-2006 GMC Sierra 2500 HD applications.
Key Features
- Engine crankshaft position sensor for ignition system repair
- Built to Beck Arnley OE specifications for form, fit, and function
- Supports direct replacement on many GM trucks, SUVs, and performance cars
- Fits select Chevrolet Silverado, GMC Sierra, Cadillac Escalade, and related models
- Part number 180-0563 for easy catalog matching
Detailed Description
Beck Arnley sources parts to meet the requirements of foreign nameplate OE applications, and this crankshaft position sensor follows that approach with a fit and design intended for confident installation. It is used in ignition and engine management systems where accurate crankshaft position input is required for timing and engine operation. This part cross-references AC Delco (e.g., 213-354, 213-352) for the same application.
Compatible With 1997-2005 Chevrolet Corvette, 1998-2002 Chevrolet Camaro, 2000-2006 Chevrolet Tahoe, 2001-2006 Chevrolet Silverado 2500 HD, and 2000-2006 GMC Yukon. It also fits many other listed GM vehicles, including Cadillac Escalade, Pontiac GTO, and Saab 9-7x applications.
What This Sensor Helps Address
- Crankshaft position sensor fault codes
- Hard starting or extended crank conditions
- Intermittent stalling or engine cut-out
- Rough running caused by inaccurate crank signal input
- No-start conditions related to crank signal loss
Installation Notes and Tips
Verify the connector orientation and terminal locating tab before installation, especially on 2007 Silverado and Sierra applications noted with the locating tab in the terminal on the top right. Confirm the exact year, make, model, and engine configuration against the vehicle listing before replacement. Inspect the harness and connector for corrosion or damage during service.
Quality Assurance
Beck Arnley parts are sourced to OE-style specifications for proper form, fit, and function. This sensor contains lead, so follow applicable handling and disposal requirements during service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engine Crankshaft Position Sensor for GM Applications
Beck Arnley 180-0563 is an engine crankshaft position sensor built to match foreign nameplate OE specifications for form, fit, and function. It is a direct-fit replacement for a wide range of Chevrolet, GMC, Cadillac, Buick, Pontiac, Saab, Hummer, and Isuzu applications, including Silverado, Sierra, Tahoe, Yukon, and Corvette models.
For drivers diagnosing crank signal faults, hard starting, or intermittent stalling, this Beck Arnley crankshaft position sensor provides the OE-style fit needed for a proper repair. The 180-0563 part number is used across many GM platforms, including 2000-2006 Chevrolet Tahoe and 2001-2006 GMC Sierra 2500 HD applications.
Key Features
- Engine crankshaft position sensor for ignition system repair
- Built to Beck Arnley OE specifications for form, fit, and function
- Supports direct replacement on many GM trucks, SUVs, and performance cars
- Fits select Chevrolet Silverado, GMC Sierra, Cadillac Escalade, and related models
- Part number 180-0563 for easy catalog matching
Detailed Description
Beck Arnley sources parts to meet the requirements of foreign nameplate OE applications, and this crankshaft position sensor follows that approach with a fit and design intended for confident installation. It is used in ignition and engine management systems where accurate crankshaft position input is required for timing and engine operation. This part cross-references AC Delco (e.g., 213-354, 213-352) for the same application.
Compatible With 1997-2005 Chevrolet Corvette, 1998-2002 Chevrolet Camaro, 2000-2006 Chevrolet Tahoe, 2001-2006 Chevrolet Silverado 2500 HD, and 2000-2006 GMC Yukon. It also fits many other listed GM vehicles, including Cadillac Escalade, Pontiac GTO, and Saab 9-7x applications.
What This Sensor Helps Address
- Crankshaft position sensor fault codes
- Hard starting or extended crank conditions
- Intermittent stalling or engine cut-out
- Rough running caused by inaccurate crank signal input
- No-start conditions related to crank signal loss
Installation Notes and Tips
Verify the connector orientation and terminal locating tab before installation, especially on 2007 Silverado and Sierra applications noted with the locating tab in the terminal on the top right. Confirm the exact year, make, model, and engine configuration against the vehicle listing before replacement. Inspect the harness and connector for corrosion or damage during service.
Quality Assurance
Beck Arnley parts are sourced to OE-style specifications for proper form, fit, and function. This sensor contains lead, so follow applicable handling and disposal requirements during service.
