Bendix Friction SBC1107A Disc Brake Pad Set - Front or Rear
OE-Style Ceramic Brake Pads
Bendix Friction Stop Ceramic disc brake pad set SBC1107A is built for drivers who want OE-style fit, form, and function in a ceramic brake pad replacement. It is designed for consistent braking performance on a wide range of BMW, Audi, and Volkswagen applications, including popular front and rear brake setups.
The Stop Ceramic line focuses on quiet operation, stable pedal feel, and direct replacement compatibility for select vehicles. If you are searching for front brake pads for a Volkswagen Jetta, rear brake pads for a BMW X5, or ceramic disc pads for an Audi A3, SBC1107A is engineered to match the original brake system requirements listed below.
- Designed to OE standards for fit and function
- Multi-layer shim for noise control
- Burnishing strips where available
- Available in ceramic or semi-metallic formulas
- Hardware included where applicable
Product Details
Bendix Friction SBC1107A is part of the Stop Ceramic product line, a brake pad range focused on OE-spec replacement coverage across North America. The ceramic formulation is intended for applications that originally used ceramic pad material, while select fitments also note semi-metallic original equipment requirements. This part number is used across front and rear positions depending on the vehicle, including BMW X6 rear brake pad applications and Volkswagen front brake pad applications with electronic wear sensor or rotor-size requirements.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues Addressed
- Squealing or brake noise from worn pads
- Reduced stopping performance from thin friction material
- Uneven pad wear on OE-style brake systems
- Brake warning light concerns on wear-sensor-equipped vehicles
- Brake service needs on ceramic-equipped BMW, Audi, and Volkswagen models
Installation Notes
- Verify rotor diameter, wear sensor configuration, and brake system notes before ordering.
- Some Volkswagen applications note an electronic wear sensor wire that may need to be removed from the front inner pad as needed.
- Certain CC, Passat, and Passat CC applications may use an electric parking brake that requires a special pad replacement procedure.
- Confirm the vehicle build sticker when required, such as PR code references for select Audi A3 applications.
- Follow the vehicle service manual for pad replacement, bedding, and electronic brake service steps.
Quality Assurance
Stop By Bendix is positioned as a broad brake coverage offering for North American vehicles, with OE-spec design targets for safe, consistent, and reliable performance. Bendix Friction SBC1107A is built to align with those standards for the listed BMW X5, BMW X6, Audi A3, and Volkswagen Jetta applications.
Original: $52.10
-65%$52.10
$18.23Bendix Friction SBC1107A Disc Brake Pad Set - Front or Rear
OE-Style Ceramic Brake Pads
Bendix Friction Stop Ceramic disc brake pad set SBC1107A is built for drivers who want OE-style fit, form, and function in a ceramic brake pad replacement. It is designed for consistent braking performance on a wide range of BMW, Audi, and Volkswagen applications, including popular front and rear brake setups.
The Stop Ceramic line focuses on quiet operation, stable pedal feel, and direct replacement compatibility for select vehicles. If you are searching for front brake pads for a Volkswagen Jetta, rear brake pads for a BMW X5, or ceramic disc pads for an Audi A3, SBC1107A is engineered to match the original brake system requirements listed below.
- Designed to OE standards for fit and function
- Multi-layer shim for noise control
- Burnishing strips where available
- Available in ceramic or semi-metallic formulas
- Hardware included where applicable
Product Details
Bendix Friction SBC1107A is part of the Stop Ceramic product line, a brake pad range focused on OE-spec replacement coverage across North America. The ceramic formulation is intended for applications that originally used ceramic pad material, while select fitments also note semi-metallic original equipment requirements. This part number is used across front and rear positions depending on the vehicle, including BMW X6 rear brake pad applications and Volkswagen front brake pad applications with electronic wear sensor or rotor-size requirements.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues Addressed
- Squealing or brake noise from worn pads
- Reduced stopping performance from thin friction material
- Uneven pad wear on OE-style brake systems
- Brake warning light concerns on wear-sensor-equipped vehicles
- Brake service needs on ceramic-equipped BMW, Audi, and Volkswagen models
Installation Notes
- Verify rotor diameter, wear sensor configuration, and brake system notes before ordering.
- Some Volkswagen applications note an electronic wear sensor wire that may need to be removed from the front inner pad as needed.
- Certain CC, Passat, and Passat CC applications may use an electric parking brake that requires a special pad replacement procedure.
- Confirm the vehicle build sticker when required, such as PR code references for select Audi A3 applications.
- Follow the vehicle service manual for pad replacement, bedding, and electronic brake service steps.
Quality Assurance
Stop By Bendix is positioned as a broad brake coverage offering for North American vehicles, with OE-spec design targets for safe, consistent, and reliable performance. Bendix Friction SBC1107A is built to align with those standards for the listed BMW X5, BMW X6, Audi A3, and Volkswagen Jetta applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE-Style Ceramic Brake Pads
Bendix Friction Stop Ceramic disc brake pad set SBC1107A is built for drivers who want OE-style fit, form, and function in a ceramic brake pad replacement. It is designed for consistent braking performance on a wide range of BMW, Audi, and Volkswagen applications, including popular front and rear brake setups.
The Stop Ceramic line focuses on quiet operation, stable pedal feel, and direct replacement compatibility for select vehicles. If you are searching for front brake pads for a Volkswagen Jetta, rear brake pads for a BMW X5, or ceramic disc pads for an Audi A3, SBC1107A is engineered to match the original brake system requirements listed below.
- Designed to OE standards for fit and function
- Multi-layer shim for noise control
- Burnishing strips where available
- Available in ceramic or semi-metallic formulas
- Hardware included where applicable
Product Details
Bendix Friction SBC1107A is part of the Stop Ceramic product line, a brake pad range focused on OE-spec replacement coverage across North America. The ceramic formulation is intended for applications that originally used ceramic pad material, while select fitments also note semi-metallic original equipment requirements. This part number is used across front and rear positions depending on the vehicle, including BMW X6 rear brake pad applications and Volkswagen front brake pad applications with electronic wear sensor or rotor-size requirements.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues Addressed
- Squealing or brake noise from worn pads
- Reduced stopping performance from thin friction material
- Uneven pad wear on OE-style brake systems
- Brake warning light concerns on wear-sensor-equipped vehicles
- Brake service needs on ceramic-equipped BMW, Audi, and Volkswagen models
Installation Notes
- Verify rotor diameter, wear sensor configuration, and brake system notes before ordering.
- Some Volkswagen applications note an electronic wear sensor wire that may need to be removed from the front inner pad as needed.
- Certain CC, Passat, and Passat CC applications may use an electric parking brake that requires a special pad replacement procedure.
- Confirm the vehicle build sticker when required, such as PR code references for select Audi A3 applications.
- Follow the vehicle service manual for pad replacement, bedding, and electronic brake service steps.
Quality Assurance
Stop By Bendix is positioned as a broad brake coverage offering for North American vehicles, with OE-spec design targets for safe, consistent, and reliable performance. Bendix Friction SBC1107A is built to align with those standards for the listed BMW X5, BMW X6, Audi A3, and Volkswagen Jetta applications.
