BGMG 5-1310-1X Universal Joint
Universal Joint for Driveline Service
This HGVF universal joint, part number 5-1310-1X, is a driveline replacement for a wide range of front and rear shaft applications. It is used on many Nissan, Jeep, Ford, Toyota, Chevrolet, and GMC platforms where a worn U-joint can create vibration, clunking, or driveline play.
- HGVF product line universal joint for driveline and axle service
- Part number 5-1310-1X for application matching
- Used across front driveshaft, rear driveshaft, and intermediate shaft positions
- Fits many CV-at-transfer-case and axle-end driveline locations
- Broad vehicle coverage from classic trucks to late-model SUVs and pickups
Fitment Coverage
Compatible with a wide range of applications, including Fits 2018-2024 Nissan Frontier, Front Driveshaft - CV at Transfer Case; Fits 2018-2024 Nissan TITAN, Front Driveshaft at Front Axle; Fits 2005-2015 Nissan TITAN, Front Driveshaft at Front Axle; Fits 2012-2016 Jeep Wrangler, Front Driveshaft - CV at Transfer Case; Fits 2005-2008 Toyota Tacoma, Front Driveshaft at Front Axle; Fits 2004-2012 Chevrolet Colorado, Front Driveshaft at Front Axle; and Fits 1996-2011 Ford Explorer, Front Driveshaft at Front Axle. This part cross-references common driveline service applications for the same style of fitment.
The HGVF 5-1310-1X is selected for vehicles that use this universal joint size and configuration at the transfer case, front axle, transmission, support bearing, or rear axle depending on the platform. It is a practical replacement for service work on Nissan Frontier and TITAN driveline repairs, Jeep Wrangler front shaft service, and older Ford Ranger or Explorer driveline maintenance where joint wear is a common source of noise and vibration.
Common Problems This Part Addresses
- Driveline vibration at speed
- Clunking during acceleration or deceleration
- Loose or worn driveshaft movement
- Noise from a failing front or rear shaft joint
- Service replacement for seized or rusted U-joint wear
Installation Notes and Tips
Verify the driveshaft position and joint style against the vehicle listing before installation. Match the application by year, make, model, and shaft location, since this part is used in multiple front and rear driveline positions. Inspect the yokes, retaining hardware, and shaft condition during service, and confirm smooth articulation after installation.
Quality Assurance
HGVF 5-1310-1X is cataloged for direct application matching across the listed driveline fitments. Use the vehicle-specific position data to confirm the correct universal joint for your repair.
BGMG 5-1310-1X Universal Joint
Universal Joint for Driveline Service
This HGVF universal joint, part number 5-1310-1X, is a driveline replacement for a wide range of front and rear shaft applications. It is used on many Nissan, Jeep, Ford, Toyota, Chevrolet, and GMC platforms where a worn U-joint can create vibration, clunking, or driveline play.
- HGVF product line universal joint for driveline and axle service
- Part number 5-1310-1X for application matching
- Used across front driveshaft, rear driveshaft, and intermediate shaft positions
- Fits many CV-at-transfer-case and axle-end driveline locations
- Broad vehicle coverage from classic trucks to late-model SUVs and pickups
Fitment Coverage
Compatible with a wide range of applications, including Fits 2018-2024 Nissan Frontier, Front Driveshaft - CV at Transfer Case; Fits 2018-2024 Nissan TITAN, Front Driveshaft at Front Axle; Fits 2005-2015 Nissan TITAN, Front Driveshaft at Front Axle; Fits 2012-2016 Jeep Wrangler, Front Driveshaft - CV at Transfer Case; Fits 2005-2008 Toyota Tacoma, Front Driveshaft at Front Axle; Fits 2004-2012 Chevrolet Colorado, Front Driveshaft at Front Axle; and Fits 1996-2011 Ford Explorer, Front Driveshaft at Front Axle. This part cross-references common driveline service applications for the same style of fitment.
The HGVF 5-1310-1X is selected for vehicles that use this universal joint size and configuration at the transfer case, front axle, transmission, support bearing, or rear axle depending on the platform. It is a practical replacement for service work on Nissan Frontier and TITAN driveline repairs, Jeep Wrangler front shaft service, and older Ford Ranger or Explorer driveline maintenance where joint wear is a common source of noise and vibration.
Common Problems This Part Addresses
- Driveline vibration at speed
- Clunking during acceleration or deceleration
- Loose or worn driveshaft movement
- Noise from a failing front or rear shaft joint
- Service replacement for seized or rusted U-joint wear
Installation Notes and Tips
Verify the driveshaft position and joint style against the vehicle listing before installation. Match the application by year, make, model, and shaft location, since this part is used in multiple front and rear driveline positions. Inspect the yokes, retaining hardware, and shaft condition during service, and confirm smooth articulation after installation.
Quality Assurance
HGVF 5-1310-1X is cataloged for direct application matching across the listed driveline fitments. Use the vehicle-specific position data to confirm the correct universal joint for your repair.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Universal Joint for Driveline Service
This HGVF universal joint, part number 5-1310-1X, is a driveline replacement for a wide range of front and rear shaft applications. It is used on many Nissan, Jeep, Ford, Toyota, Chevrolet, and GMC platforms where a worn U-joint can create vibration, clunking, or driveline play.
- HGVF product line universal joint for driveline and axle service
- Part number 5-1310-1X for application matching
- Used across front driveshaft, rear driveshaft, and intermediate shaft positions
- Fits many CV-at-transfer-case and axle-end driveline locations
- Broad vehicle coverage from classic trucks to late-model SUVs and pickups
Fitment Coverage
Compatible with a wide range of applications, including Fits 2018-2024 Nissan Frontier, Front Driveshaft - CV at Transfer Case; Fits 2018-2024 Nissan TITAN, Front Driveshaft at Front Axle; Fits 2005-2015 Nissan TITAN, Front Driveshaft at Front Axle; Fits 2012-2016 Jeep Wrangler, Front Driveshaft - CV at Transfer Case; Fits 2005-2008 Toyota Tacoma, Front Driveshaft at Front Axle; Fits 2004-2012 Chevrolet Colorado, Front Driveshaft at Front Axle; and Fits 1996-2011 Ford Explorer, Front Driveshaft at Front Axle. This part cross-references common driveline service applications for the same style of fitment.
The HGVF 5-1310-1X is selected for vehicles that use this universal joint size and configuration at the transfer case, front axle, transmission, support bearing, or rear axle depending on the platform. It is a practical replacement for service work on Nissan Frontier and TITAN driveline repairs, Jeep Wrangler front shaft service, and older Ford Ranger or Explorer driveline maintenance where joint wear is a common source of noise and vibration.
Common Problems This Part Addresses
- Driveline vibration at speed
- Clunking during acceleration or deceleration
- Loose or worn driveshaft movement
- Noise from a failing front or rear shaft joint
- Service replacement for seized or rusted U-joint wear
Installation Notes and Tips
Verify the driveshaft position and joint style against the vehicle listing before installation. Match the application by year, make, model, and shaft location, since this part is used in multiple front and rear driveline positions. Inspect the yokes, retaining hardware, and shaft condition during service, and confirm smooth articulation after installation.
Quality Assurance
HGVF 5-1310-1X is cataloged for direct application matching across the listed driveline fitments. Use the vehicle-specific position data to confirm the correct universal joint for your repair.
