Bilstein 25-311303 Suspension Shock Absorber - Rear Right
Bilstein B8 5160 Remote Reservoir Shock
The Bilstein B8 5160 remote reservoir shock absorber is a direct-fit suspension upgrade for lifted trucks and SUVs that need more control on rough terrain. This rear right shock for the 1996-2002 Toyota 4Runner uses a monotube design, digressive valving, and a remote reservoir to improve cooling and maintain consistent damping during demanding off-road use.
Key Features
- Direct-fit rear right shock absorber for lifted applications
- Remote reservoir increases cooling capacity and wheel travel
- Monotube internal design for consistent fade-resistant performance
- Velocity-sensitive digressive valve tuning for the specific application
- 46mm piston and 14mm shaft for controlled suspension response
- Zinc-plated finish for added corrosion resistance
- Black bellows boot included
- Billet reservoir clamp included where applicable
Product Details
Bilstein B8 5160 part number 25-311303 is built for the rear right position on 1996-2002 Toyota 4Runner models with 0-2.5 inches of rear lift. The smooth-body shock uses a stem upper mount and 19mm eye lower mount, with a collapsed length of 12.91 inches and an extended length of 20.70 inches. The remote reservoir layout helps manage heat buildup, while the monotube construction supports stable damping over repeated compression cycles. If you are replacing a worn Toyota 4Runner rear shock or upgrading a lifted suspension setup, 25-311303 provides a direct-fit solution tuned for this application. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Shock Can Address
- Excessive rear-end bounce on lifted Toyota 4Runner suspension setups
- Reduced damping control on rough roads and trails
- Heat-related shock fade during extended off-road driving
- Uneven rear suspension response after shock wear
- Loss of wheel travel and control from an aging rear shock absorber
Installation Notes and Tips
Compatible With 1996-2002 Toyota 4Runner, rear right, for vehicles with 0-2.5 inches of rear lift. Verify mount style, lift height, and available clearance for the remote reservoir before installation. Confirm the collapsed and extended lengths match the suspension travel requirements of the vehicle. Part number 25-311303 should be matched to the rear right position only.
Quality Assurance
Bilstein B8 5160 shocks are engineered with a monotube design and application-specific valving to support consistent performance in demanding conditions. The B8 5160 line is Bilstein’s remote reservoir shock series for lifted truck and SUV applications, focused on cooling capacity, durability, and controlled suspension movement.
Original: $309.72
-65%$309.72
$108.40Bilstein 25-311303 Suspension Shock Absorber - Rear Right
Bilstein B8 5160 Remote Reservoir Shock
The Bilstein B8 5160 remote reservoir shock absorber is a direct-fit suspension upgrade for lifted trucks and SUVs that need more control on rough terrain. This rear right shock for the 1996-2002 Toyota 4Runner uses a monotube design, digressive valving, and a remote reservoir to improve cooling and maintain consistent damping during demanding off-road use.
Key Features
- Direct-fit rear right shock absorber for lifted applications
- Remote reservoir increases cooling capacity and wheel travel
- Monotube internal design for consistent fade-resistant performance
- Velocity-sensitive digressive valve tuning for the specific application
- 46mm piston and 14mm shaft for controlled suspension response
- Zinc-plated finish for added corrosion resistance
- Black bellows boot included
- Billet reservoir clamp included where applicable
Product Details
Bilstein B8 5160 part number 25-311303 is built for the rear right position on 1996-2002 Toyota 4Runner models with 0-2.5 inches of rear lift. The smooth-body shock uses a stem upper mount and 19mm eye lower mount, with a collapsed length of 12.91 inches and an extended length of 20.70 inches. The remote reservoir layout helps manage heat buildup, while the monotube construction supports stable damping over repeated compression cycles. If you are replacing a worn Toyota 4Runner rear shock or upgrading a lifted suspension setup, 25-311303 provides a direct-fit solution tuned for this application. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Shock Can Address
- Excessive rear-end bounce on lifted Toyota 4Runner suspension setups
- Reduced damping control on rough roads and trails
- Heat-related shock fade during extended off-road driving
- Uneven rear suspension response after shock wear
- Loss of wheel travel and control from an aging rear shock absorber
Installation Notes and Tips
Compatible With 1996-2002 Toyota 4Runner, rear right, for vehicles with 0-2.5 inches of rear lift. Verify mount style, lift height, and available clearance for the remote reservoir before installation. Confirm the collapsed and extended lengths match the suspension travel requirements of the vehicle. Part number 25-311303 should be matched to the rear right position only.
Quality Assurance
Bilstein B8 5160 shocks are engineered with a monotube design and application-specific valving to support consistent performance in demanding conditions. The B8 5160 line is Bilstein’s remote reservoir shock series for lifted truck and SUV applications, focused on cooling capacity, durability, and controlled suspension movement.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Bilstein B8 5160 Remote Reservoir Shock
The Bilstein B8 5160 remote reservoir shock absorber is a direct-fit suspension upgrade for lifted trucks and SUVs that need more control on rough terrain. This rear right shock for the 1996-2002 Toyota 4Runner uses a monotube design, digressive valving, and a remote reservoir to improve cooling and maintain consistent damping during demanding off-road use.
Key Features
- Direct-fit rear right shock absorber for lifted applications
- Remote reservoir increases cooling capacity and wheel travel
- Monotube internal design for consistent fade-resistant performance
- Velocity-sensitive digressive valve tuning for the specific application
- 46mm piston and 14mm shaft for controlled suspension response
- Zinc-plated finish for added corrosion resistance
- Black bellows boot included
- Billet reservoir clamp included where applicable
Product Details
Bilstein B8 5160 part number 25-311303 is built for the rear right position on 1996-2002 Toyota 4Runner models with 0-2.5 inches of rear lift. The smooth-body shock uses a stem upper mount and 19mm eye lower mount, with a collapsed length of 12.91 inches and an extended length of 20.70 inches. The remote reservoir layout helps manage heat buildup, while the monotube construction supports stable damping over repeated compression cycles. If you are replacing a worn Toyota 4Runner rear shock or upgrading a lifted suspension setup, 25-311303 provides a direct-fit solution tuned for this application. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Shock Can Address
- Excessive rear-end bounce on lifted Toyota 4Runner suspension setups
- Reduced damping control on rough roads and trails
- Heat-related shock fade during extended off-road driving
- Uneven rear suspension response after shock wear
- Loss of wheel travel and control from an aging rear shock absorber
Installation Notes and Tips
Compatible With 1996-2002 Toyota 4Runner, rear right, for vehicles with 0-2.5 inches of rear lift. Verify mount style, lift height, and available clearance for the remote reservoir before installation. Confirm the collapsed and extended lengths match the suspension travel requirements of the vehicle. Part number 25-311303 should be matched to the rear right position only.
Quality Assurance
Bilstein B8 5160 shocks are engineered with a monotube design and application-specific valving to support consistent performance in demanding conditions. The B8 5160 line is Bilstein’s remote reservoir shock series for lifted truck and SUV applications, focused on cooling capacity, durability, and controlled suspension movement.
