Cardone 19-B1320 Disc Brake Caliper - Front Right
Remanufactured Front Right Caliper for Mazda B2600
Cardone 19-B1320 is a remanufactured disc brake caliper with bracket for the front right position on 1987-1993 Mazda B2600 applications. It is built with new premium components, pressure-tested, and finished for OE-style fitment and dependable braking performance.
The Unloaded Caliper w/Bracket line focuses on direct replacement fitment and complete hardware support where applicable. For Mazda B2600 front brake service, 19-B1320 provides a remanufactured OE-style solution with a steel piston, new seals, and corrosion-resistant finishing.
Key Features
- Remanufactured Original Equipment-style disc brake caliper
- Fits 1987-1993 Mazda B2600, front right
- Bracket included for this application
- Steel piston with 53.848 mm piston size
- New high-temperature EPDM rubber seals
- New bleeder screw for positive sealing and easier bleeding
- New stainless steel hardware clips and mounting pins where applicable
- Oil emulsion finish with gray caliper color
- Inlet port size: M10x1.0; bleeder port size: M7x1.0
- Plastic cap plug protects brake port threads during installation
Product Details
Cardone 19-B1320 is engineered for drivers servicing the front brake system on the Mazda B2600. The caliper is remanufactured to rigorous quality standards, pressure-tested for consistent hydraulic performance, and treated with a rust inhibitor to help preserve the OE finish. This part cross-references Mazda UC8633710 and UC8633980C for the same application.
The Cardone Unloaded Caliper w/Bracket product line is built around direct-fit replacement parts that simplify brake service while maintaining OE-style geometry. For 1987-1993 Mazda B2600 front right brake repair, 19-B1320 is a practical replacement when the original caliper is sticking, leaking, or no longer delivering even pad contact.
Common Brake Issues This Part Can Address
- Brake fluid leakage at the caliper
- Uneven pad wear on the front right wheel
- Dragging or sticking brake caliper movement
- Poor brake pedal response caused by caliper hydraulic issues
- Brake pull during stopping from a worn or seized caliper
Installation Notes and Tips
Fits 1987-1993 Mazda B2600, front right. Confirm the inlet and bleeder port sizes before installation and inspect the brake hose, pads, and rotor condition at the same time. Use the brake fluid specified by the vehicle manufacturer, and bleed the system thoroughly after installation to remove trapped air.
For floating caliper service, silicone grease is used on the mounting pins. If the vehicle uses a bracketed front caliper setup, verify the bracket and hardware condition before assembly. The package contents include the caliper, bracket, and hardware kit as listed for this part.
Quality Assurance
Each CARDONE brake caliper is remanufactured with new premium components and 100% pressure-tested before release. The process uses less energy and raw material than manufacturing a new part, while maintaining OE-style fit and performance standards for the Mazda B2600 front brake application.
Original: $67.94
-65%$67.94
$23.78Cardone 19-B1320 Disc Brake Caliper - Front Right
Remanufactured Front Right Caliper for Mazda B2600
Cardone 19-B1320 is a remanufactured disc brake caliper with bracket for the front right position on 1987-1993 Mazda B2600 applications. It is built with new premium components, pressure-tested, and finished for OE-style fitment and dependable braking performance.
The Unloaded Caliper w/Bracket line focuses on direct replacement fitment and complete hardware support where applicable. For Mazda B2600 front brake service, 19-B1320 provides a remanufactured OE-style solution with a steel piston, new seals, and corrosion-resistant finishing.
Key Features
- Remanufactured Original Equipment-style disc brake caliper
- Fits 1987-1993 Mazda B2600, front right
- Bracket included for this application
- Steel piston with 53.848 mm piston size
- New high-temperature EPDM rubber seals
- New bleeder screw for positive sealing and easier bleeding
- New stainless steel hardware clips and mounting pins where applicable
- Oil emulsion finish with gray caliper color
- Inlet port size: M10x1.0; bleeder port size: M7x1.0
- Plastic cap plug protects brake port threads during installation
Product Details
Cardone 19-B1320 is engineered for drivers servicing the front brake system on the Mazda B2600. The caliper is remanufactured to rigorous quality standards, pressure-tested for consistent hydraulic performance, and treated with a rust inhibitor to help preserve the OE finish. This part cross-references Mazda UC8633710 and UC8633980C for the same application.
The Cardone Unloaded Caliper w/Bracket product line is built around direct-fit replacement parts that simplify brake service while maintaining OE-style geometry. For 1987-1993 Mazda B2600 front right brake repair, 19-B1320 is a practical replacement when the original caliper is sticking, leaking, or no longer delivering even pad contact.
Common Brake Issues This Part Can Address
- Brake fluid leakage at the caliper
- Uneven pad wear on the front right wheel
- Dragging or sticking brake caliper movement
- Poor brake pedal response caused by caliper hydraulic issues
- Brake pull during stopping from a worn or seized caliper
Installation Notes and Tips
Fits 1987-1993 Mazda B2600, front right. Confirm the inlet and bleeder port sizes before installation and inspect the brake hose, pads, and rotor condition at the same time. Use the brake fluid specified by the vehicle manufacturer, and bleed the system thoroughly after installation to remove trapped air.
For floating caliper service, silicone grease is used on the mounting pins. If the vehicle uses a bracketed front caliper setup, verify the bracket and hardware condition before assembly. The package contents include the caliper, bracket, and hardware kit as listed for this part.
Quality Assurance
Each CARDONE brake caliper is remanufactured with new premium components and 100% pressure-tested before release. The process uses less energy and raw material than manufacturing a new part, while maintaining OE-style fit and performance standards for the Mazda B2600 front brake application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Remanufactured Front Right Caliper for Mazda B2600
Cardone 19-B1320 is a remanufactured disc brake caliper with bracket for the front right position on 1987-1993 Mazda B2600 applications. It is built with new premium components, pressure-tested, and finished for OE-style fitment and dependable braking performance.
The Unloaded Caliper w/Bracket line focuses on direct replacement fitment and complete hardware support where applicable. For Mazda B2600 front brake service, 19-B1320 provides a remanufactured OE-style solution with a steel piston, new seals, and corrosion-resistant finishing.
Key Features
- Remanufactured Original Equipment-style disc brake caliper
- Fits 1987-1993 Mazda B2600, front right
- Bracket included for this application
- Steel piston with 53.848 mm piston size
- New high-temperature EPDM rubber seals
- New bleeder screw for positive sealing and easier bleeding
- New stainless steel hardware clips and mounting pins where applicable
- Oil emulsion finish with gray caliper color
- Inlet port size: M10x1.0; bleeder port size: M7x1.0
- Plastic cap plug protects brake port threads during installation
Product Details
Cardone 19-B1320 is engineered for drivers servicing the front brake system on the Mazda B2600. The caliper is remanufactured to rigorous quality standards, pressure-tested for consistent hydraulic performance, and treated with a rust inhibitor to help preserve the OE finish. This part cross-references Mazda UC8633710 and UC8633980C for the same application.
The Cardone Unloaded Caliper w/Bracket product line is built around direct-fit replacement parts that simplify brake service while maintaining OE-style geometry. For 1987-1993 Mazda B2600 front right brake repair, 19-B1320 is a practical replacement when the original caliper is sticking, leaking, or no longer delivering even pad contact.
Common Brake Issues This Part Can Address
- Brake fluid leakage at the caliper
- Uneven pad wear on the front right wheel
- Dragging or sticking brake caliper movement
- Poor brake pedal response caused by caliper hydraulic issues
- Brake pull during stopping from a worn or seized caliper
Installation Notes and Tips
Fits 1987-1993 Mazda B2600, front right. Confirm the inlet and bleeder port sizes before installation and inspect the brake hose, pads, and rotor condition at the same time. Use the brake fluid specified by the vehicle manufacturer, and bleed the system thoroughly after installation to remove trapped air.
For floating caliper service, silicone grease is used on the mounting pins. If the vehicle uses a bracketed front caliper setup, verify the bracket and hardware condition before assembly. The package contents include the caliper, bracket, and hardware kit as listed for this part.
Quality Assurance
Each CARDONE brake caliper is remanufactured with new premium components and 100% pressure-tested before release. The process uses less energy and raw material than manufacturing a new part, while maintaining OE-style fit and performance standards for the Mazda B2600 front brake application.
