Cardone 19-B1904 Disc Brake Caliper - Rear Left
Rear Left Brake Caliper for Nissan 240SX
Restore consistent rear braking with this Cardone unloaded caliper with bracket, part number 19-B1904. It is a remanufactured disc brake caliper built for the rear left position on select Nissan 240SX models, with a steel piston and OE-style fitment for straightforward replacement service.
Compatible with 1995-1998 Nissan 240SX, rear left, this caliper is finished in gray with an oil emulsion coating and includes the bracket where applicable. The design focuses on dependable sealing, clean bleeding, and accurate fit for brake service on the Nissan 240SX platform.
Key Features
- Remanufactured Cardone disc brake caliper for the rear left position
- Part number 19-B1904 for application matching and catalog lookup
- Steel piston with 38.0746 mm piston size
- Gray caliper color with oil emulsion finish
- M10x1.0 inlet port and bleeder port size
- New bleeder screw, seals, and service hardware included in the package contents
- Bracket included where applicable for this application
- Pressure-tested remanufactured unit for consistent brake performance
Product Details
Cardone’s Unloaded Caliper w/Bracket line focuses on remanufactured OE-style brake hydraulics with new premium components installed during the rebuild process. For this 19-B1904 caliper, the original equipment fit is retained while wear items such as rubber seals are replaced with high-temperature EPDM rubber, and the unit is pressure-tested before release. The result is a direct replacement for 1995-1998 Nissan 240SX rear left brake service where a complete caliper assembly with bracket is required.
This part cross-references Nissan 4401169F01 for the same application.
What It Helps Fix
- Rear brake drag or uneven rear braking on a Nissan 240SX
- Leaking caliper seals or fluid loss at the wheel end
- Sticking piston movement caused by corrosion or internal wear
- Soft or inconsistent brake pedal feel related to caliper condition
- Brake service issues tied to damaged bleeder threads or worn hardware
Installation Notes
Fits 1995-1998 Nissan 240SX, rear left. Verify the piston material, port size, and bracket configuration against the removed part before installation. Use the brake fluid specified by the vehicle manufacturer, and bleed the system thoroughly after installation to remove trapped air. A silicone grease is used on floating caliper mounting pins. New fluid should always come from a sealed container.
Quality Assurance
This remanufactured Cardone caliper is 100% pressure-tested and rebuilt with new components to support reliable brake operation. The caliper is treated with a rust inhibitor and kept in OE finish during remanufacturing, with new bleeder screws, seals, and related service parts used where applicable.
Original: $149.75
-65%$149.75
$52.41Cardone 19-B1904 Disc Brake Caliper - Rear Left
Rear Left Brake Caliper for Nissan 240SX
Restore consistent rear braking with this Cardone unloaded caliper with bracket, part number 19-B1904. It is a remanufactured disc brake caliper built for the rear left position on select Nissan 240SX models, with a steel piston and OE-style fitment for straightforward replacement service.
Compatible with 1995-1998 Nissan 240SX, rear left, this caliper is finished in gray with an oil emulsion coating and includes the bracket where applicable. The design focuses on dependable sealing, clean bleeding, and accurate fit for brake service on the Nissan 240SX platform.
Key Features
- Remanufactured Cardone disc brake caliper for the rear left position
- Part number 19-B1904 for application matching and catalog lookup
- Steel piston with 38.0746 mm piston size
- Gray caliper color with oil emulsion finish
- M10x1.0 inlet port and bleeder port size
- New bleeder screw, seals, and service hardware included in the package contents
- Bracket included where applicable for this application
- Pressure-tested remanufactured unit for consistent brake performance
Product Details
Cardone’s Unloaded Caliper w/Bracket line focuses on remanufactured OE-style brake hydraulics with new premium components installed during the rebuild process. For this 19-B1904 caliper, the original equipment fit is retained while wear items such as rubber seals are replaced with high-temperature EPDM rubber, and the unit is pressure-tested before release. The result is a direct replacement for 1995-1998 Nissan 240SX rear left brake service where a complete caliper assembly with bracket is required.
This part cross-references Nissan 4401169F01 for the same application.
What It Helps Fix
- Rear brake drag or uneven rear braking on a Nissan 240SX
- Leaking caliper seals or fluid loss at the wheel end
- Sticking piston movement caused by corrosion or internal wear
- Soft or inconsistent brake pedal feel related to caliper condition
- Brake service issues tied to damaged bleeder threads or worn hardware
Installation Notes
Fits 1995-1998 Nissan 240SX, rear left. Verify the piston material, port size, and bracket configuration against the removed part before installation. Use the brake fluid specified by the vehicle manufacturer, and bleed the system thoroughly after installation to remove trapped air. A silicone grease is used on floating caliper mounting pins. New fluid should always come from a sealed container.
Quality Assurance
This remanufactured Cardone caliper is 100% pressure-tested and rebuilt with new components to support reliable brake operation. The caliper is treated with a rust inhibitor and kept in OE finish during remanufacturing, with new bleeder screws, seals, and related service parts used where applicable.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Left Brake Caliper for Nissan 240SX
Restore consistent rear braking with this Cardone unloaded caliper with bracket, part number 19-B1904. It is a remanufactured disc brake caliper built for the rear left position on select Nissan 240SX models, with a steel piston and OE-style fitment for straightforward replacement service.
Compatible with 1995-1998 Nissan 240SX, rear left, this caliper is finished in gray with an oil emulsion coating and includes the bracket where applicable. The design focuses on dependable sealing, clean bleeding, and accurate fit for brake service on the Nissan 240SX platform.
Key Features
- Remanufactured Cardone disc brake caliper for the rear left position
- Part number 19-B1904 for application matching and catalog lookup
- Steel piston with 38.0746 mm piston size
- Gray caliper color with oil emulsion finish
- M10x1.0 inlet port and bleeder port size
- New bleeder screw, seals, and service hardware included in the package contents
- Bracket included where applicable for this application
- Pressure-tested remanufactured unit for consistent brake performance
Product Details
Cardone’s Unloaded Caliper w/Bracket line focuses on remanufactured OE-style brake hydraulics with new premium components installed during the rebuild process. For this 19-B1904 caliper, the original equipment fit is retained while wear items such as rubber seals are replaced with high-temperature EPDM rubber, and the unit is pressure-tested before release. The result is a direct replacement for 1995-1998 Nissan 240SX rear left brake service where a complete caliper assembly with bracket is required.
This part cross-references Nissan 4401169F01 for the same application.
What It Helps Fix
- Rear brake drag or uneven rear braking on a Nissan 240SX
- Leaking caliper seals or fluid loss at the wheel end
- Sticking piston movement caused by corrosion or internal wear
- Soft or inconsistent brake pedal feel related to caliper condition
- Brake service issues tied to damaged bleeder threads or worn hardware
Installation Notes
Fits 1995-1998 Nissan 240SX, rear left. Verify the piston material, port size, and bracket configuration against the removed part before installation. Use the brake fluid specified by the vehicle manufacturer, and bleed the system thoroughly after installation to remove trapped air. A silicone grease is used on floating caliper mounting pins. New fluid should always come from a sealed container.
Quality Assurance
This remanufactured Cardone caliper is 100% pressure-tested and rebuilt with new components to support reliable brake operation. The caliper is treated with a rust inhibitor and kept in OE finish during remanufacturing, with new bleeder screws, seals, and related service parts used where applicable.
