Cardone 27-6528 Steering Gear
Cardone 27-6528 Steering Gear for Jeep
Restore precise steering response with the Cardone 27-6528 remanufactured steering gear box. Built for power steering systems, this unit is re-engineered and hydraulically tested to deliver OE-style fit and function for Jeep applications.
Key Features
- Remanufactured steering gear box for power steering systems
- 100% new O-rings and lip seals for leak-resistant performance
- Shafts surfaced to precise specifications to help reduce premature seal wear
- All critical components tested for reliability
- Rust inhibitive Cool Dip finish for consistent surface protection
- O-ring hose ports with M18 x 1.5 pressure port and M16 x 1.5 return port threads
- 3.4 turns lock to lock for responsive steering feel
Product Details
The Cardone Steering Gear line focuses on remanufactured steering components that match original equipment performance. Part number 27-6528 is built as a power steering gear box with a splined, single-flat input shaft, 25 + flat & groove spline count, and a 4-hole mounting pattern. It is finished in black and supplied as a remanufactured Original Equipment-style replacement for Jeep steering systems.
This part cross-references Jeep OE numbers such as 5360093 and 52002085 for the same application. It is a direct-fit steering gear solution for Jeep Wrangler, Grand Wagoneer, J10, J20, Cherokee, and Wagoneer models listed below.
What It Helps Address
- Loose or vague steering feel
- Steering gear leakage from worn seals
- Excessive play in the steering system
- Reduced steering response during turning
- Wear-related steering gear performance loss
Installation Notes
Fits 1987-1995 Jeep Wrangler, steering gear equipped with power steering. Fits 1984-1991 Jeep Grand Wagoneer, steering gear equipped with power steering. Fits 1980-1988 Jeep J10, steering gear equipped with power steering. Fits 1980-1988 Jeep J20, steering gear equipped with power steering. Fits 1980-1983 Jeep Cherokee, steering gear equipped with power steering. Fits 1980-1983 Jeep Wagoneer, steering gear equipped with power steering.
Use the included instruction sheet and flushing instructions during installation. Verify hose port thread sizes, mounting points, and steering linkage alignment before returning the vehicle to service. Proper system flushing is important when replacing a steering gear to help protect the replacement unit and related components.
Quality Assurance
Each Cardone remanufactured steering gear is hydraulically tested to confirm fit and function before release. The remanufacturing process also reduces energy and raw material use compared with producing a new part, while maintaining OE-style performance standards.
Cardone 27-6528 Steering Gear
Cardone 27-6528 Steering Gear for Jeep
Restore precise steering response with the Cardone 27-6528 remanufactured steering gear box. Built for power steering systems, this unit is re-engineered and hydraulically tested to deliver OE-style fit and function for Jeep applications.
Key Features
- Remanufactured steering gear box for power steering systems
- 100% new O-rings and lip seals for leak-resistant performance
- Shafts surfaced to precise specifications to help reduce premature seal wear
- All critical components tested for reliability
- Rust inhibitive Cool Dip finish for consistent surface protection
- O-ring hose ports with M18 x 1.5 pressure port and M16 x 1.5 return port threads
- 3.4 turns lock to lock for responsive steering feel
Product Details
The Cardone Steering Gear line focuses on remanufactured steering components that match original equipment performance. Part number 27-6528 is built as a power steering gear box with a splined, single-flat input shaft, 25 + flat & groove spline count, and a 4-hole mounting pattern. It is finished in black and supplied as a remanufactured Original Equipment-style replacement for Jeep steering systems.
This part cross-references Jeep OE numbers such as 5360093 and 52002085 for the same application. It is a direct-fit steering gear solution for Jeep Wrangler, Grand Wagoneer, J10, J20, Cherokee, and Wagoneer models listed below.
What It Helps Address
- Loose or vague steering feel
- Steering gear leakage from worn seals
- Excessive play in the steering system
- Reduced steering response during turning
- Wear-related steering gear performance loss
Installation Notes
Fits 1987-1995 Jeep Wrangler, steering gear equipped with power steering. Fits 1984-1991 Jeep Grand Wagoneer, steering gear equipped with power steering. Fits 1980-1988 Jeep J10, steering gear equipped with power steering. Fits 1980-1988 Jeep J20, steering gear equipped with power steering. Fits 1980-1983 Jeep Cherokee, steering gear equipped with power steering. Fits 1980-1983 Jeep Wagoneer, steering gear equipped with power steering.
Use the included instruction sheet and flushing instructions during installation. Verify hose port thread sizes, mounting points, and steering linkage alignment before returning the vehicle to service. Proper system flushing is important when replacing a steering gear to help protect the replacement unit and related components.
Quality Assurance
Each Cardone remanufactured steering gear is hydraulically tested to confirm fit and function before release. The remanufacturing process also reduces energy and raw material use compared with producing a new part, while maintaining OE-style performance standards.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Cardone 27-6528 Steering Gear for Jeep
Restore precise steering response with the Cardone 27-6528 remanufactured steering gear box. Built for power steering systems, this unit is re-engineered and hydraulically tested to deliver OE-style fit and function for Jeep applications.
Key Features
- Remanufactured steering gear box for power steering systems
- 100% new O-rings and lip seals for leak-resistant performance
- Shafts surfaced to precise specifications to help reduce premature seal wear
- All critical components tested for reliability
- Rust inhibitive Cool Dip finish for consistent surface protection
- O-ring hose ports with M18 x 1.5 pressure port and M16 x 1.5 return port threads
- 3.4 turns lock to lock for responsive steering feel
Product Details
The Cardone Steering Gear line focuses on remanufactured steering components that match original equipment performance. Part number 27-6528 is built as a power steering gear box with a splined, single-flat input shaft, 25 + flat & groove spline count, and a 4-hole mounting pattern. It is finished in black and supplied as a remanufactured Original Equipment-style replacement for Jeep steering systems.
This part cross-references Jeep OE numbers such as 5360093 and 52002085 for the same application. It is a direct-fit steering gear solution for Jeep Wrangler, Grand Wagoneer, J10, J20, Cherokee, and Wagoneer models listed below.
What It Helps Address
- Loose or vague steering feel
- Steering gear leakage from worn seals
- Excessive play in the steering system
- Reduced steering response during turning
- Wear-related steering gear performance loss
Installation Notes
Fits 1987-1995 Jeep Wrangler, steering gear equipped with power steering. Fits 1984-1991 Jeep Grand Wagoneer, steering gear equipped with power steering. Fits 1980-1988 Jeep J10, steering gear equipped with power steering. Fits 1980-1988 Jeep J20, steering gear equipped with power steering. Fits 1980-1983 Jeep Cherokee, steering gear equipped with power steering. Fits 1980-1983 Jeep Wagoneer, steering gear equipped with power steering.
Use the included instruction sheet and flushing instructions during installation. Verify hose port thread sizes, mounting points, and steering linkage alignment before returning the vehicle to service. Proper system flushing is important when replacing a steering gear to help protect the replacement unit and related components.
Quality Assurance
Each Cardone remanufactured steering gear is hydraulically tested to confirm fit and function before release. The remanufacturing process also reduces energy and raw material use compared with producing a new part, while maintaining OE-style performance standards.
