Cardone 52-7365 Power Brake Booster
Hydro-Boost Brake Booster Overview
Cardone 52-7365 is a remanufactured hydro-boost power brake booster built to restore hydraulic brake assist with O.E.-style fit and function. It is re-engineered, fully tested, and finished for durability, making it a practical replacement for Ford applications that use hydraulic booster assist.
The Cardone Hydro-Boost Power Brake Booster line focuses on restoring original braking performance with remanufactured components that are inspected for design improvements where applicable. For Ford brake repair jobs that call for a hydraulic booster, this part number 52-7365 is built to match the original application requirements.
Key Features
- Remanufactured to match O.E. performance
- 100% tested for reliable fit and function
- 100% O.E. quality seals and check valves installed
- Rust-prohibitive finish helps extend service life
- Master cylinder output rods are pre-adjusted when included
- Black cast iron construction
- Master cylinder not included
Detailed Product Description
Cardone 52-7365 is a remanufactured power brake booster for hydraulic brake assist systems. It is built from cast iron and supplied with an O-ring kit and instruction sheet. The booster is engineered to restore pedal assist and braking response in Ford vehicles that use a hydro-boost setup, including Ford applications cross-referenced to 2C2Z2005AA. If you are searching for a Ford hydro-boost power brake booster replacement, Cardone 52-7365 provides an OE-style solution with tested performance and controlled fitment.
Common Brake Assist Problems It Can Address
- Hard brake pedal feel from a worn hydraulic booster
- Reduced brake assist during normal driving or stop-and-go traffic
- Brake response changes caused by internal seal or check valve wear
- Fluid leakage around the booster assembly
- Noise or inconsistent assist from a failing hydro-boost unit
Installation Notes and Tips
Verify the master cylinder stud thread size is 3/8 x 16 before installation. Confirm the vehicle uses a hydraulic booster configuration and compare the original unit to Cardone 52-7365 before removal. The package includes a hydraulic booster, O-ring kit, and instruction sheet; the master cylinder is not included. For Ford brake booster replacement work, follow the service manual procedure for hydraulic line handling, bleeding, and final pedal check.
Quality Assurance
Each unit is 100% tested to help ensure dependable operation and correct fit. Cardone remanufactures this hydro-boost power brake booster to O.E. performance standards and applies a rust-prohibitive finish for added durability. This part cross-references Ford 2C2Z2005AA for the same application.
Cardone 52-7365 Power Brake Booster
Hydro-Boost Brake Booster Overview
Cardone 52-7365 is a remanufactured hydro-boost power brake booster built to restore hydraulic brake assist with O.E.-style fit and function. It is re-engineered, fully tested, and finished for durability, making it a practical replacement for Ford applications that use hydraulic booster assist.
The Cardone Hydro-Boost Power Brake Booster line focuses on restoring original braking performance with remanufactured components that are inspected for design improvements where applicable. For Ford brake repair jobs that call for a hydraulic booster, this part number 52-7365 is built to match the original application requirements.
Key Features
- Remanufactured to match O.E. performance
- 100% tested for reliable fit and function
- 100% O.E. quality seals and check valves installed
- Rust-prohibitive finish helps extend service life
- Master cylinder output rods are pre-adjusted when included
- Black cast iron construction
- Master cylinder not included
Detailed Product Description
Cardone 52-7365 is a remanufactured power brake booster for hydraulic brake assist systems. It is built from cast iron and supplied with an O-ring kit and instruction sheet. The booster is engineered to restore pedal assist and braking response in Ford vehicles that use a hydro-boost setup, including Ford applications cross-referenced to 2C2Z2005AA. If you are searching for a Ford hydro-boost power brake booster replacement, Cardone 52-7365 provides an OE-style solution with tested performance and controlled fitment.
Common Brake Assist Problems It Can Address
- Hard brake pedal feel from a worn hydraulic booster
- Reduced brake assist during normal driving or stop-and-go traffic
- Brake response changes caused by internal seal or check valve wear
- Fluid leakage around the booster assembly
- Noise or inconsistent assist from a failing hydro-boost unit
Installation Notes and Tips
Verify the master cylinder stud thread size is 3/8 x 16 before installation. Confirm the vehicle uses a hydraulic booster configuration and compare the original unit to Cardone 52-7365 before removal. The package includes a hydraulic booster, O-ring kit, and instruction sheet; the master cylinder is not included. For Ford brake booster replacement work, follow the service manual procedure for hydraulic line handling, bleeding, and final pedal check.
Quality Assurance
Each unit is 100% tested to help ensure dependable operation and correct fit. Cardone remanufactures this hydro-boost power brake booster to O.E. performance standards and applies a rust-prohibitive finish for added durability. This part cross-references Ford 2C2Z2005AA for the same application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Hydro-Boost Brake Booster Overview
Cardone 52-7365 is a remanufactured hydro-boost power brake booster built to restore hydraulic brake assist with O.E.-style fit and function. It is re-engineered, fully tested, and finished for durability, making it a practical replacement for Ford applications that use hydraulic booster assist.
The Cardone Hydro-Boost Power Brake Booster line focuses on restoring original braking performance with remanufactured components that are inspected for design improvements where applicable. For Ford brake repair jobs that call for a hydraulic booster, this part number 52-7365 is built to match the original application requirements.
Key Features
- Remanufactured to match O.E. performance
- 100% tested for reliable fit and function
- 100% O.E. quality seals and check valves installed
- Rust-prohibitive finish helps extend service life
- Master cylinder output rods are pre-adjusted when included
- Black cast iron construction
- Master cylinder not included
Detailed Product Description
Cardone 52-7365 is a remanufactured power brake booster for hydraulic brake assist systems. It is built from cast iron and supplied with an O-ring kit and instruction sheet. The booster is engineered to restore pedal assist and braking response in Ford vehicles that use a hydro-boost setup, including Ford applications cross-referenced to 2C2Z2005AA. If you are searching for a Ford hydro-boost power brake booster replacement, Cardone 52-7365 provides an OE-style solution with tested performance and controlled fitment.
Common Brake Assist Problems It Can Address
- Hard brake pedal feel from a worn hydraulic booster
- Reduced brake assist during normal driving or stop-and-go traffic
- Brake response changes caused by internal seal or check valve wear
- Fluid leakage around the booster assembly
- Noise or inconsistent assist from a failing hydro-boost unit
Installation Notes and Tips
Verify the master cylinder stud thread size is 3/8 x 16 before installation. Confirm the vehicle uses a hydraulic booster configuration and compare the original unit to Cardone 52-7365 before removal. The package includes a hydraulic booster, O-ring kit, and instruction sheet; the master cylinder is not included. For Ford brake booster replacement work, follow the service manual procedure for hydraulic line handling, bleeding, and final pedal check.
Quality Assurance
Each unit is 100% tested to help ensure dependable operation and correct fit. Cardone remanufactures this hydro-boost power brake booster to O.E. performance standards and applies a rust-prohibitive finish for added durability. This part cross-references Ford 2C2Z2005AA for the same application.
