Centric 106.04110 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking performance, even wear, and reduced noise. Part number 106.04110 uses an OE-style positive molding process and includes precision-fit details that support stable caliper operation on applications such as Ford F-150 and Ford E-150/E-250/E-350.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent density across the pad
- Integrally molded friction attachment for stable pad structure
- Mechanically attached shims to help reduce vibration-related noise
- Precision cut or shaved backing plates for proper caliper fitment
- Scorched friction surface to accelerate initial break-in
- Asbestos-free formulation
- Mounting hardware included
- Pad shims included
Product Details
The Centric Posi-Quiet line focuses on brake pad consistency and noise control. This formulation is manufactured with the same positive molding process used by original equipment suppliers, helping maintain uniform friction material density from edge to edge. Centric also adds a scorching process to remove impurities and pre-burnish the friction surface, which helps shorten the break-in period after installation. Part number 106.04110 is a practical choice for drivers looking for OE-style disc brake pad replacement on Ford F-150 and Ford E-Series brake service jobs.
This part cross-references Wagner Brake SX411 for the same application.
Common Brake Issues It Can Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Harsh or noisy braking during stop-and-go driving
- Extended break-in time after pad replacement
- Poor caliper pad fit from worn or imprecise backing plate geometry
Installation Notes
Verify rotor condition, caliper hardware, and guide pin movement before installation. Clean the caliper bracket and contact points, then install the supplied shims and hardware where applicable. After fitting 106.04110, follow a proper bedding-in procedure to help the pads transfer material evenly to the rotor surface. Confirm vehicle-specific brake dimensions and axle position before ordering, especially when servicing Ford F-150 or Ford E-Series brake systems.
Quality Assurance
Centric manufactures the Posi-Quiet line with OE-style positive molding, precision backing plate preparation, and a scorching process to support consistent performance and reduced noise. The friction material is asbestos free and built for extended wear characteristics within the Centric brake pad family.
Original: $57.69
-65%$57.69
$20.19Centric 106.04110 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking performance, even wear, and reduced noise. Part number 106.04110 uses an OE-style positive molding process and includes precision-fit details that support stable caliper operation on applications such as Ford F-150 and Ford E-150/E-250/E-350.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent density across the pad
- Integrally molded friction attachment for stable pad structure
- Mechanically attached shims to help reduce vibration-related noise
- Precision cut or shaved backing plates for proper caliper fitment
- Scorched friction surface to accelerate initial break-in
- Asbestos-free formulation
- Mounting hardware included
- Pad shims included
Product Details
The Centric Posi-Quiet line focuses on brake pad consistency and noise control. This formulation is manufactured with the same positive molding process used by original equipment suppliers, helping maintain uniform friction material density from edge to edge. Centric also adds a scorching process to remove impurities and pre-burnish the friction surface, which helps shorten the break-in period after installation. Part number 106.04110 is a practical choice for drivers looking for OE-style disc brake pad replacement on Ford F-150 and Ford E-Series brake service jobs.
This part cross-references Wagner Brake SX411 for the same application.
Common Brake Issues It Can Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Harsh or noisy braking during stop-and-go driving
- Extended break-in time after pad replacement
- Poor caliper pad fit from worn or imprecise backing plate geometry
Installation Notes
Verify rotor condition, caliper hardware, and guide pin movement before installation. Clean the caliper bracket and contact points, then install the supplied shims and hardware where applicable. After fitting 106.04110, follow a proper bedding-in procedure to help the pads transfer material evenly to the rotor surface. Confirm vehicle-specific brake dimensions and axle position before ordering, especially when servicing Ford F-150 or Ford E-Series brake systems.
Quality Assurance
Centric manufactures the Posi-Quiet line with OE-style positive molding, precision backing plate preparation, and a scorching process to support consistent performance and reduced noise. The friction material is asbestos free and built for extended wear characteristics within the Centric brake pad family.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking performance, even wear, and reduced noise. Part number 106.04110 uses an OE-style positive molding process and includes precision-fit details that support stable caliper operation on applications such as Ford F-150 and Ford E-150/E-250/E-350.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent density across the pad
- Integrally molded friction attachment for stable pad structure
- Mechanically attached shims to help reduce vibration-related noise
- Precision cut or shaved backing plates for proper caliper fitment
- Scorched friction surface to accelerate initial break-in
- Asbestos-free formulation
- Mounting hardware included
- Pad shims included
Product Details
The Centric Posi-Quiet line focuses on brake pad consistency and noise control. This formulation is manufactured with the same positive molding process used by original equipment suppliers, helping maintain uniform friction material density from edge to edge. Centric also adds a scorching process to remove impurities and pre-burnish the friction surface, which helps shorten the break-in period after installation. Part number 106.04110 is a practical choice for drivers looking for OE-style disc brake pad replacement on Ford F-150 and Ford E-Series brake service jobs.
This part cross-references Wagner Brake SX411 for the same application.
Common Brake Issues It Can Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Harsh or noisy braking during stop-and-go driving
- Extended break-in time after pad replacement
- Poor caliper pad fit from worn or imprecise backing plate geometry
Installation Notes
Verify rotor condition, caliper hardware, and guide pin movement before installation. Clean the caliper bracket and contact points, then install the supplied shims and hardware where applicable. After fitting 106.04110, follow a proper bedding-in procedure to help the pads transfer material evenly to the rotor surface. Confirm vehicle-specific brake dimensions and axle position before ordering, especially when servicing Ford F-150 or Ford E-Series brake systems.
Quality Assurance
Centric manufactures the Posi-Quiet line with OE-style positive molding, precision backing plate preparation, and a scorching process to support consistent performance and reduced noise. The friction material is asbestos free and built for extended wear characteristics within the Centric brake pad family.
