Centric 106.05030 Disc Brake Pad Set - Front
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.05030 is built for front brake service on select Honda, Acura, and Isuzu applications. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
Key Features
- Fits front brake positions on select 1991-2002 Honda Accord, 1997-2001 Acura Integra, and other listed applications
- Semi-metallic friction material for dependable stopping performance
- Positive-molded friction material for uniform density across the pad
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Asbestos-free formulation
Product Details
The Centric Posi-Quiet line focuses on controlled friction, fitment accuracy, and reduced brake noise. For this Centric brake pad set, the positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain consistent performance as the pads wear. The backing plate and shim design are intended to support proper caliper fit and reduce vibration, while the scorching process helps accelerate the break-in period. Part number 106.05030 is a direct-fit front disc brake pad set for a wide range of Honda Accord, Acura Integra, Honda CR-V, Honda Prelude, Acura CL, Acura RL, Acura TL, Honda Odyssey, Acura Legend, and Isuzu Oasis applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It May Address
- Brake squeal or vibration during light to moderate stops
- Uneven pad wear caused by inconsistent friction density
- Delayed pad bedding after brake service
- Poor caliper fit from worn or inaccurate pad backing plates
- Reduced braking consistency on front disc brake systems
Installation Notes and Tips
Verify front axle fitment before ordering, since this pad set is application-specific. Inspect rotors, caliper hardware, and guide pins during installation, and replace worn components as needed to maintain even pad contact. Follow the vehicle manufacturer’s bedding procedure after installation to help the pads seat properly. Confirm sensor routing and hardware placement before final assembly.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching, precision backing plate preparation, and shim attachment to improve consistency and reduce noise. The friction material is asbestos-free and built for controlled wear across the service life of the pad.
Original: $36.15
-65%$36.15
$12.65Centric 106.05030 Disc Brake Pad Set - Front
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.05030 is built for front brake service on select Honda, Acura, and Isuzu applications. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
Key Features
- Fits front brake positions on select 1991-2002 Honda Accord, 1997-2001 Acura Integra, and other listed applications
- Semi-metallic friction material for dependable stopping performance
- Positive-molded friction material for uniform density across the pad
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Asbestos-free formulation
Product Details
The Centric Posi-Quiet line focuses on controlled friction, fitment accuracy, and reduced brake noise. For this Centric brake pad set, the positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain consistent performance as the pads wear. The backing plate and shim design are intended to support proper caliper fit and reduce vibration, while the scorching process helps accelerate the break-in period. Part number 106.05030 is a direct-fit front disc brake pad set for a wide range of Honda Accord, Acura Integra, Honda CR-V, Honda Prelude, Acura CL, Acura RL, Acura TL, Honda Odyssey, Acura Legend, and Isuzu Oasis applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It May Address
- Brake squeal or vibration during light to moderate stops
- Uneven pad wear caused by inconsistent friction density
- Delayed pad bedding after brake service
- Poor caliper fit from worn or inaccurate pad backing plates
- Reduced braking consistency on front disc brake systems
Installation Notes and Tips
Verify front axle fitment before ordering, since this pad set is application-specific. Inspect rotors, caliper hardware, and guide pins during installation, and replace worn components as needed to maintain even pad contact. Follow the vehicle manufacturer’s bedding procedure after installation to help the pads seat properly. Confirm sensor routing and hardware placement before final assembly.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching, precision backing plate preparation, and shim attachment to improve consistency and reduce noise. The friction material is asbestos-free and built for controlled wear across the service life of the pad.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.05030 is built for front brake service on select Honda, Acura, and Isuzu applications. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
Key Features
- Fits front brake positions on select 1991-2002 Honda Accord, 1997-2001 Acura Integra, and other listed applications
- Semi-metallic friction material for dependable stopping performance
- Positive-molded friction material for uniform density across the pad
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Asbestos-free formulation
Product Details
The Centric Posi-Quiet line focuses on controlled friction, fitment accuracy, and reduced brake noise. For this Centric brake pad set, the positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain consistent performance as the pads wear. The backing plate and shim design are intended to support proper caliper fit and reduce vibration, while the scorching process helps accelerate the break-in period. Part number 106.05030 is a direct-fit front disc brake pad set for a wide range of Honda Accord, Acura Integra, Honda CR-V, Honda Prelude, Acura CL, Acura RL, Acura TL, Honda Odyssey, Acura Legend, and Isuzu Oasis applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It May Address
- Brake squeal or vibration during light to moderate stops
- Uneven pad wear caused by inconsistent friction density
- Delayed pad bedding after brake service
- Poor caliper fit from worn or inaccurate pad backing plates
- Reduced braking consistency on front disc brake systems
Installation Notes and Tips
Verify front axle fitment before ordering, since this pad set is application-specific. Inspect rotors, caliper hardware, and guide pins during installation, and replace worn components as needed to maintain even pad contact. Follow the vehicle manufacturer’s bedding procedure after installation to help the pads seat properly. Confirm sensor routing and hardware placement before final assembly.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching, precision backing plate preparation, and shim attachment to improve consistency and reduce noise. The friction material is asbestos-free and built for controlled wear across the service life of the pad.
