Centric 106.07010 Disc Brake Pad Set - Front
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking performance, stable pedal feel, and reduced noise. Part number 106.07010 uses an OE-style positive molding process and includes features that support clean caliper fitment and even pad wear.
For drivers searching for semi-metallic brake pads for Honda Civic or Acura TL applications, 106.07010 is a direct-fit style disc brake pad set with the details buyers look for in a daily-driver brake service.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent friction density across the pad
- Precision-cut or shaved backing plates for proper caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Asbestos-free friction formulation
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Pad shims included
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on controlled friction behavior and quieter operation. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform density for more even wear over the life of the pad. The semi-metallic compound is paired with integrally molded friction attachment, shims, and backing plate finishing details that support stable contact in the caliper. Part number 106.07010 also uses a scorching process to precondition the pad surface and accelerate the break-in stage after installation.
This part cross-references Wagner Brake SX701 for the same application.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Noise from poor caliper fitment
- Longer initial break-in after brake service
- Wear sensor replacement needs during brake pad service
Installation Notes
Verify caliper clearance, rotor condition, and sensor routing before installation. Use the included hardware where applicable, and follow the vehicle service procedure for pad bedding after installation. For Honda Civic and Acura TL brake pad replacement jobs, confirm the exact axle position and sensor requirements against the vehicle application before ordering.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction compounds to support consistent performance and reduced noise. Part number 106.07010 is built with asbestos-free friction material and the brand’s noise-control details, including shims and backing plate finishing, to support reliable service life.
Original: $63.95
-65%$63.95
$22.38Centric 106.07010 Disc Brake Pad Set - Front
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking performance, stable pedal feel, and reduced noise. Part number 106.07010 uses an OE-style positive molding process and includes features that support clean caliper fitment and even pad wear.
For drivers searching for semi-metallic brake pads for Honda Civic or Acura TL applications, 106.07010 is a direct-fit style disc brake pad set with the details buyers look for in a daily-driver brake service.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent friction density across the pad
- Precision-cut or shaved backing plates for proper caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Asbestos-free friction formulation
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Pad shims included
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on controlled friction behavior and quieter operation. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform density for more even wear over the life of the pad. The semi-metallic compound is paired with integrally molded friction attachment, shims, and backing plate finishing details that support stable contact in the caliper. Part number 106.07010 also uses a scorching process to precondition the pad surface and accelerate the break-in stage after installation.
This part cross-references Wagner Brake SX701 for the same application.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Noise from poor caliper fitment
- Longer initial break-in after brake service
- Wear sensor replacement needs during brake pad service
Installation Notes
Verify caliper clearance, rotor condition, and sensor routing before installation. Use the included hardware where applicable, and follow the vehicle service procedure for pad bedding after installation. For Honda Civic and Acura TL brake pad replacement jobs, confirm the exact axle position and sensor requirements against the vehicle application before ordering.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction compounds to support consistent performance and reduced noise. Part number 106.07010 is built with asbestos-free friction material and the brand’s noise-control details, including shims and backing plate finishing, to support reliable service life.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking performance, stable pedal feel, and reduced noise. Part number 106.07010 uses an OE-style positive molding process and includes features that support clean caliper fitment and even pad wear.
For drivers searching for semi-metallic brake pads for Honda Civic or Acura TL applications, 106.07010 is a direct-fit style disc brake pad set with the details buyers look for in a daily-driver brake service.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent friction density across the pad
- Precision-cut or shaved backing plates for proper caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Asbestos-free friction formulation
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Pad shims included
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on controlled friction behavior and quieter operation. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform density for more even wear over the life of the pad. The semi-metallic compound is paired with integrally molded friction attachment, shims, and backing plate finishing details that support stable contact in the caliper. Part number 106.07010 also uses a scorching process to precondition the pad surface and accelerate the break-in stage after installation.
This part cross-references Wagner Brake SX701 for the same application.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Noise from poor caliper fitment
- Longer initial break-in after brake service
- Wear sensor replacement needs during brake pad service
Installation Notes
Verify caliper clearance, rotor condition, and sensor routing before installation. Use the included hardware where applicable, and follow the vehicle service procedure for pad bedding after installation. For Honda Civic and Acura TL brake pad replacement jobs, confirm the exact axle position and sensor requirements against the vehicle application before ordering.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction compounds to support consistent performance and reduced noise. Part number 106.07010 is built with asbestos-free friction material and the brand’s noise-control details, including shims and backing plate finishing, to support reliable service life.
