Centric 106.07500 Disc Brake Pad Set - Rear
Rear Brake Pads for Camaro and Firebird
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.07500 is built for rear brake service on select 1998-2002 Chevrolet Camaro and Pontiac Firebird models. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
The Posi-Quiet line focuses on fit, noise control, and break-in behavior. For rear brake pad replacement on a 1998-2002 Chevrolet Camaro or 1998-2002 Pontiac Firebird, this pad set includes wear sensor preparation, pad shims, and mounting hardware where applicable, along with a scorching process that helps remove impurities and speed initial bedding.
Key Features
- Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set
- Part number 106.07500
- Semi-metallic friction material for rear disc brake applications
- Positive molded friction material for consistent density and wear
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to accelerate break-in
- Pad shims included
- Pad wear sensor included and prepared for pad wear sensor use
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
Centric engineered the Posi-Quiet brake pad line to address common brake complaints such as noise and vibration. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform performance across the pad surface. On this 106.07500 application, the rear pad design is paired with shims and backing plate details that support proper caliper fitment on the Camaro and Firebird rear brake setup.
This part cross-references Gates 23975 for the same application. If you are searching for rear brake pads for 1998-2002 Chevrolet Camaro, rear or 1998-2002 Pontiac Firebird, rear, this Centric Posi-Quiet set is the direct fitment-focused option.
Common Brake Issues It Can Address
- Brake squeal from pad vibration
- Uneven pad wear caused by inconsistent friction density
- Noise during light or moderate braking
- Extended break-in time after pad replacement
- Fitment concerns related to backing plate and shim design
Installation Notes and Tips
Verify rear axle brake pad fitment against the vehicle application before installation. Inspect caliper hardware, rotor condition, and pad contact surfaces during service. Clean the caliper bracket and pad abutment points, then follow the recommended bedding procedure after installation to help the friction material seat properly. For 1998-2002 Chevrolet Camaro rear brake service and 1998-2002 Pontiac Firebird rear brake service, confirm sensor routing and hardware placement before final assembly.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and adds scorching to help remove impurities from the friction material before service. The pads are asbestos free and built with shims and backing plate details intended to support consistent braking performance and reduced noise.
Centric 106.07500 Disc Brake Pad Set - Rear
Rear Brake Pads for Camaro and Firebird
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.07500 is built for rear brake service on select 1998-2002 Chevrolet Camaro and Pontiac Firebird models. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
The Posi-Quiet line focuses on fit, noise control, and break-in behavior. For rear brake pad replacement on a 1998-2002 Chevrolet Camaro or 1998-2002 Pontiac Firebird, this pad set includes wear sensor preparation, pad shims, and mounting hardware where applicable, along with a scorching process that helps remove impurities and speed initial bedding.
Key Features
- Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set
- Part number 106.07500
- Semi-metallic friction material for rear disc brake applications
- Positive molded friction material for consistent density and wear
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to accelerate break-in
- Pad shims included
- Pad wear sensor included and prepared for pad wear sensor use
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
Centric engineered the Posi-Quiet brake pad line to address common brake complaints such as noise and vibration. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform performance across the pad surface. On this 106.07500 application, the rear pad design is paired with shims and backing plate details that support proper caliper fitment on the Camaro and Firebird rear brake setup.
This part cross-references Gates 23975 for the same application. If you are searching for rear brake pads for 1998-2002 Chevrolet Camaro, rear or 1998-2002 Pontiac Firebird, rear, this Centric Posi-Quiet set is the direct fitment-focused option.
Common Brake Issues It Can Address
- Brake squeal from pad vibration
- Uneven pad wear caused by inconsistent friction density
- Noise during light or moderate braking
- Extended break-in time after pad replacement
- Fitment concerns related to backing plate and shim design
Installation Notes and Tips
Verify rear axle brake pad fitment against the vehicle application before installation. Inspect caliper hardware, rotor condition, and pad contact surfaces during service. Clean the caliper bracket and pad abutment points, then follow the recommended bedding procedure after installation to help the friction material seat properly. For 1998-2002 Chevrolet Camaro rear brake service and 1998-2002 Pontiac Firebird rear brake service, confirm sensor routing and hardware placement before final assembly.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and adds scorching to help remove impurities from the friction material before service. The pads are asbestos free and built with shims and backing plate details intended to support consistent braking performance and reduced noise.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Pads for Camaro and Firebird
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.07500 is built for rear brake service on select 1998-2002 Chevrolet Camaro and Pontiac Firebird models. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
The Posi-Quiet line focuses on fit, noise control, and break-in behavior. For rear brake pad replacement on a 1998-2002 Chevrolet Camaro or 1998-2002 Pontiac Firebird, this pad set includes wear sensor preparation, pad shims, and mounting hardware where applicable, along with a scorching process that helps remove impurities and speed initial bedding.
Key Features
- Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set
- Part number 106.07500
- Semi-metallic friction material for rear disc brake applications
- Positive molded friction material for consistent density and wear
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to accelerate break-in
- Pad shims included
- Pad wear sensor included and prepared for pad wear sensor use
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
Centric engineered the Posi-Quiet brake pad line to address common brake complaints such as noise and vibration. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform performance across the pad surface. On this 106.07500 application, the rear pad design is paired with shims and backing plate details that support proper caliper fitment on the Camaro and Firebird rear brake setup.
This part cross-references Gates 23975 for the same application. If you are searching for rear brake pads for 1998-2002 Chevrolet Camaro, rear or 1998-2002 Pontiac Firebird, rear, this Centric Posi-Quiet set is the direct fitment-focused option.
Common Brake Issues It Can Address
- Brake squeal from pad vibration
- Uneven pad wear caused by inconsistent friction density
- Noise during light or moderate braking
- Extended break-in time after pad replacement
- Fitment concerns related to backing plate and shim design
Installation Notes and Tips
Verify rear axle brake pad fitment against the vehicle application before installation. Inspect caliper hardware, rotor condition, and pad contact surfaces during service. Clean the caliper bracket and pad abutment points, then follow the recommended bedding procedure after installation to help the friction material seat properly. For 1998-2002 Chevrolet Camaro rear brake service and 1998-2002 Pontiac Firebird rear brake service, confirm sensor routing and hardware placement before final assembly.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and adds scorching to help remove impurities from the friction material before service. The pads are asbestos free and built with shims and backing plate details intended to support consistent braking performance and reduced noise.
