Centric 106.07900 Disc Brake Pad Set - Front
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for drivers who need consistent braking performance and controlled noise on the road. This Centric brake pad set, part number 106.07900, is made for front brake service on select Jeep Grand Cherokee models and uses a semi-metallic friction formula with OE-style construction details.
Compatible With 1999-2002 Jeep Grand Cherokee front brake applications, including ATE caliper setups with cast# 4835. If you are searching for front brake pads for a 1999 Jeep Grand Cherokee, 2000 Jeep Grand Cherokee, 2001 Jeep Grand Cherokee, or 2002 Jeep Grand Cherokee, 106.07900 is the direct fitment reference to check.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molding process for consistent friction density across the pad
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Asbestos-free formulation
- Pad wear sensor included and prepared for pad wear sensor use
- Mounting hardware and pad shims included
- Integrally molded friction attachment
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on stable pedal feel, even wear, and reduced brake noise. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform density through the life of the pad. For Jeep Grand Cherokee front brake service, part number 106.07900 is a practical OE-style replacement choice when you need a semi-metallic disc brake pad set with fitment-specific hardware details.
This part cross-references Gates 23631 for the same application.
Common Brake Issues It Can Address
- Squealing or vibration noise from worn front brake pads
- Uneven pad wear caused by inconsistent friction material density
- Reduced braking response from pads near end of service life
- Fitment concerns on ATE caliper front brake setups
- Brake dust and surface contamination from aged pad material
Installation Notes
Verify caliper type and cast number before installation. This Centric 106.07900 pad set is listed for front position use on 1999-2002 Jeep Grand Cherokee models with ATE caliper and cast# 4835. Inspect rotors, slides, and caliper hardware during service, and follow the vehicle manufacturer’s bedding procedure after installation to help the pads seat properly.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and adds a scorching process to help remove impurities and accelerate break-in. The pads are asbestos free and built with shims and backing plate details aimed at improving fit and reducing noise.
Centric 106.07900 Disc Brake Pad Set - Front
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for drivers who need consistent braking performance and controlled noise on the road. This Centric brake pad set, part number 106.07900, is made for front brake service on select Jeep Grand Cherokee models and uses a semi-metallic friction formula with OE-style construction details.
Compatible With 1999-2002 Jeep Grand Cherokee front brake applications, including ATE caliper setups with cast# 4835. If you are searching for front brake pads for a 1999 Jeep Grand Cherokee, 2000 Jeep Grand Cherokee, 2001 Jeep Grand Cherokee, or 2002 Jeep Grand Cherokee, 106.07900 is the direct fitment reference to check.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molding process for consistent friction density across the pad
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Asbestos-free formulation
- Pad wear sensor included and prepared for pad wear sensor use
- Mounting hardware and pad shims included
- Integrally molded friction attachment
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on stable pedal feel, even wear, and reduced brake noise. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform density through the life of the pad. For Jeep Grand Cherokee front brake service, part number 106.07900 is a practical OE-style replacement choice when you need a semi-metallic disc brake pad set with fitment-specific hardware details.
This part cross-references Gates 23631 for the same application.
Common Brake Issues It Can Address
- Squealing or vibration noise from worn front brake pads
- Uneven pad wear caused by inconsistent friction material density
- Reduced braking response from pads near end of service life
- Fitment concerns on ATE caliper front brake setups
- Brake dust and surface contamination from aged pad material
Installation Notes
Verify caliper type and cast number before installation. This Centric 106.07900 pad set is listed for front position use on 1999-2002 Jeep Grand Cherokee models with ATE caliper and cast# 4835. Inspect rotors, slides, and caliper hardware during service, and follow the vehicle manufacturer’s bedding procedure after installation to help the pads seat properly.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and adds a scorching process to help remove impurities and accelerate break-in. The pads are asbestos free and built with shims and backing plate details aimed at improving fit and reducing noise.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for drivers who need consistent braking performance and controlled noise on the road. This Centric brake pad set, part number 106.07900, is made for front brake service on select Jeep Grand Cherokee models and uses a semi-metallic friction formula with OE-style construction details.
Compatible With 1999-2002 Jeep Grand Cherokee front brake applications, including ATE caliper setups with cast# 4835. If you are searching for front brake pads for a 1999 Jeep Grand Cherokee, 2000 Jeep Grand Cherokee, 2001 Jeep Grand Cherokee, or 2002 Jeep Grand Cherokee, 106.07900 is the direct fitment reference to check.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molding process for consistent friction density across the pad
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Asbestos-free formulation
- Pad wear sensor included and prepared for pad wear sensor use
- Mounting hardware and pad shims included
- Integrally molded friction attachment
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on stable pedal feel, even wear, and reduced brake noise. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform density through the life of the pad. For Jeep Grand Cherokee front brake service, part number 106.07900 is a practical OE-style replacement choice when you need a semi-metallic disc brake pad set with fitment-specific hardware details.
This part cross-references Gates 23631 for the same application.
Common Brake Issues It Can Address
- Squealing or vibration noise from worn front brake pads
- Uneven pad wear caused by inconsistent friction material density
- Reduced braking response from pads near end of service life
- Fitment concerns on ATE caliper front brake setups
- Brake dust and surface contamination from aged pad material
Installation Notes
Verify caliper type and cast number before installation. This Centric 106.07900 pad set is listed for front position use on 1999-2002 Jeep Grand Cherokee models with ATE caliper and cast# 4835. Inspect rotors, slides, and caliper hardware during service, and follow the vehicle manufacturer’s bedding procedure after installation to help the pads seat properly.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and adds a scorching process to help remove impurities and accelerate break-in. The pads are asbestos free and built with shims and backing plate details aimed at improving fit and reducing noise.
