Centric 106.07910 Disc Brake Pad Set - Rear
Centric Posi-Quiet Rear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets, part number 106.07910, are built for rear brake service on 1999-2004 Jeep Grand Cherokee models. This Centric brake pad set uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
The Posi-Quiet line focuses on fit, noise control, and break-in behavior. For Jeep Grand Cherokee rear brake pad replacement, 106.07910 includes precision-fit backing plate details, shims, and a scorching process that helps remove impurities from the friction material before installation.
Key Features
- Fits 1999-2004 Jeep Grand Cherokee, rear
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent pad density
- Integrally molded friction attachment
- Pad shims included for noise control
- Mounting hardware included where applicable
- Asbestos-free friction formulation
- Prepared without a pad wear sensor
Product Details
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are engineered for drivers who need a direct-fit rear brake pad solution for the Jeep Grand Cherokee. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform wear characteristics over the life of the pad. Precision-cut or shaved backing plates and mechanically attached shims are used to improve caliper fit and reduce vibration-related noise. The added scorching process pre-burnishes the friction surface to speed up initial bedding. Part number 106.07910 is also referenced in OE-style replacement catalogs for the same application, including Raybestos Brakes EHT791H.
What It Helps Address
- Rear brake noise during stops
- Brake vibration caused by pad movement
- Uneven pad wear from inconsistent friction density
- Extended break-in time after pad replacement
- Worn rear pads on 1999-2004 Jeep Grand Cherokee vehicles
Installation Notes
Verify rear brake pad dimensions and caliper fitment before installation on your Jeep Grand Cherokee. Inspect rotors, caliper hardware, and guide pins for wear or contamination before fitting new pads. Clean the caliper bracket contact points and follow the vehicle manufacturer’s bedding procedure after installation. Part number 106.07910 is intended for rear brake service only on the listed applications.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and adds a scorching process to help improve consistency and reduce impurities in the friction material. The pads are asbestos free and include shims for noise management. Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built to meet the demands of routine rear brake replacement on the Jeep Grand Cherokee.
Centric 106.07910 Disc Brake Pad Set - Rear
Centric Posi-Quiet Rear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets, part number 106.07910, are built for rear brake service on 1999-2004 Jeep Grand Cherokee models. This Centric brake pad set uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
The Posi-Quiet line focuses on fit, noise control, and break-in behavior. For Jeep Grand Cherokee rear brake pad replacement, 106.07910 includes precision-fit backing plate details, shims, and a scorching process that helps remove impurities from the friction material before installation.
Key Features
- Fits 1999-2004 Jeep Grand Cherokee, rear
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent pad density
- Integrally molded friction attachment
- Pad shims included for noise control
- Mounting hardware included where applicable
- Asbestos-free friction formulation
- Prepared without a pad wear sensor
Product Details
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are engineered for drivers who need a direct-fit rear brake pad solution for the Jeep Grand Cherokee. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform wear characteristics over the life of the pad. Precision-cut or shaved backing plates and mechanically attached shims are used to improve caliper fit and reduce vibration-related noise. The added scorching process pre-burnishes the friction surface to speed up initial bedding. Part number 106.07910 is also referenced in OE-style replacement catalogs for the same application, including Raybestos Brakes EHT791H.
What It Helps Address
- Rear brake noise during stops
- Brake vibration caused by pad movement
- Uneven pad wear from inconsistent friction density
- Extended break-in time after pad replacement
- Worn rear pads on 1999-2004 Jeep Grand Cherokee vehicles
Installation Notes
Verify rear brake pad dimensions and caliper fitment before installation on your Jeep Grand Cherokee. Inspect rotors, caliper hardware, and guide pins for wear or contamination before fitting new pads. Clean the caliper bracket contact points and follow the vehicle manufacturer’s bedding procedure after installation. Part number 106.07910 is intended for rear brake service only on the listed applications.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and adds a scorching process to help improve consistency and reduce impurities in the friction material. The pads are asbestos free and include shims for noise management. Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built to meet the demands of routine rear brake replacement on the Jeep Grand Cherokee.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Rear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets, part number 106.07910, are built for rear brake service on 1999-2004 Jeep Grand Cherokee models. This Centric brake pad set uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
The Posi-Quiet line focuses on fit, noise control, and break-in behavior. For Jeep Grand Cherokee rear brake pad replacement, 106.07910 includes precision-fit backing plate details, shims, and a scorching process that helps remove impurities from the friction material before installation.
Key Features
- Fits 1999-2004 Jeep Grand Cherokee, rear
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent pad density
- Integrally molded friction attachment
- Pad shims included for noise control
- Mounting hardware included where applicable
- Asbestos-free friction formulation
- Prepared without a pad wear sensor
Product Details
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are engineered for drivers who need a direct-fit rear brake pad solution for the Jeep Grand Cherokee. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform wear characteristics over the life of the pad. Precision-cut or shaved backing plates and mechanically attached shims are used to improve caliper fit and reduce vibration-related noise. The added scorching process pre-burnishes the friction surface to speed up initial bedding. Part number 106.07910 is also referenced in OE-style replacement catalogs for the same application, including Raybestos Brakes EHT791H.
What It Helps Address
- Rear brake noise during stops
- Brake vibration caused by pad movement
- Uneven pad wear from inconsistent friction density
- Extended break-in time after pad replacement
- Worn rear pads on 1999-2004 Jeep Grand Cherokee vehicles
Installation Notes
Verify rear brake pad dimensions and caliper fitment before installation on your Jeep Grand Cherokee. Inspect rotors, caliper hardware, and guide pins for wear or contamination before fitting new pads. Clean the caliper bracket contact points and follow the vehicle manufacturer’s bedding procedure after installation. Part number 106.07910 is intended for rear brake service only on the listed applications.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and adds a scorching process to help improve consistency and reduce impurities in the friction material. The pads are asbestos free and include shims for noise management. Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built to meet the demands of routine rear brake replacement on the Jeep Grand Cherokee.
