Centric 106.09310 Disc Brake Pad Set - Front
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for front brake service on select Ford, Lincoln, and Mercury vehicles. This Centric 106.09310 brake pad set uses an OE-style positive molding process to promote consistent friction density, even wear, and stable pedal feel across the life of the pad.
For drivers searching for front brake pads for a 2003-2011 Ford Crown Victoria, 2003-2011 Lincoln Town Car, 2003-2011 Mercury Grand Marquis, or 2003-2004 Mercury Marauder, this application-specific set is built around fitment and noise control. The 106.09310 part number is also a useful reference when cross-checking replacement options.
Key Features
- Semi-metallic friction material for everyday braking performance
- Positive molded construction for consistent material density
- Integrally molded friction attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Asbestos-free formulation
- Mounting hardware and pad shims included
- Prepared for front brake applications without a pad wear sensor
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on controlled wear and quieter operation through details that matter in brake service. The backing plate design, shim attachment, and scorching process work together to support smoother bedding and more consistent performance. This Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set is a direct-fit front brake solution for 2003-2011 Ford Crown Victoria, 2003-2011 Lincoln Town Car, 2003-2011 Mercury Grand Marquis, and 2003-2004 Mercury Marauder applications.
This part cross-references Wagner Brake MX931 and SX931 for the same application. Part number 106.09310 is also referenced in Centric interchange listings for replacement matching.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer break-in time after brake service
- Fitment issues at the caliper interface
- Noise and vibration during front brake operation
Installation Notes
Verify front axle fitment before installation and confirm the vehicle is one of the listed applications. Inspect rotors, calipers, and slide hardware during service, and replace worn components as needed to support proper pad contact. Use the included hardware and shims where applicable, and follow standard brake bedding procedures after installation.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching to help remove impurities from the friction material before service. The pad set is asbestos free and built with fitment-focused details intended to support consistent wear and reduced noise in front brake applications.
Centric 106.09310 Disc Brake Pad Set - Front
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for front brake service on select Ford, Lincoln, and Mercury vehicles. This Centric 106.09310 brake pad set uses an OE-style positive molding process to promote consistent friction density, even wear, and stable pedal feel across the life of the pad.
For drivers searching for front brake pads for a 2003-2011 Ford Crown Victoria, 2003-2011 Lincoln Town Car, 2003-2011 Mercury Grand Marquis, or 2003-2004 Mercury Marauder, this application-specific set is built around fitment and noise control. The 106.09310 part number is also a useful reference when cross-checking replacement options.
Key Features
- Semi-metallic friction material for everyday braking performance
- Positive molded construction for consistent material density
- Integrally molded friction attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Asbestos-free formulation
- Mounting hardware and pad shims included
- Prepared for front brake applications without a pad wear sensor
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on controlled wear and quieter operation through details that matter in brake service. The backing plate design, shim attachment, and scorching process work together to support smoother bedding and more consistent performance. This Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set is a direct-fit front brake solution for 2003-2011 Ford Crown Victoria, 2003-2011 Lincoln Town Car, 2003-2011 Mercury Grand Marquis, and 2003-2004 Mercury Marauder applications.
This part cross-references Wagner Brake MX931 and SX931 for the same application. Part number 106.09310 is also referenced in Centric interchange listings for replacement matching.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer break-in time after brake service
- Fitment issues at the caliper interface
- Noise and vibration during front brake operation
Installation Notes
Verify front axle fitment before installation and confirm the vehicle is one of the listed applications. Inspect rotors, calipers, and slide hardware during service, and replace worn components as needed to support proper pad contact. Use the included hardware and shims where applicable, and follow standard brake bedding procedures after installation.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching to help remove impurities from the friction material before service. The pad set is asbestos free and built with fitment-focused details intended to support consistent wear and reduced noise in front brake applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for front brake service on select Ford, Lincoln, and Mercury vehicles. This Centric 106.09310 brake pad set uses an OE-style positive molding process to promote consistent friction density, even wear, and stable pedal feel across the life of the pad.
For drivers searching for front brake pads for a 2003-2011 Ford Crown Victoria, 2003-2011 Lincoln Town Car, 2003-2011 Mercury Grand Marquis, or 2003-2004 Mercury Marauder, this application-specific set is built around fitment and noise control. The 106.09310 part number is also a useful reference when cross-checking replacement options.
Key Features
- Semi-metallic friction material for everyday braking performance
- Positive molded construction for consistent material density
- Integrally molded friction attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Asbestos-free formulation
- Mounting hardware and pad shims included
- Prepared for front brake applications without a pad wear sensor
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on controlled wear and quieter operation through details that matter in brake service. The backing plate design, shim attachment, and scorching process work together to support smoother bedding and more consistent performance. This Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set is a direct-fit front brake solution for 2003-2011 Ford Crown Victoria, 2003-2011 Lincoln Town Car, 2003-2011 Mercury Grand Marquis, and 2003-2004 Mercury Marauder applications.
This part cross-references Wagner Brake MX931 and SX931 for the same application. Part number 106.09310 is also referenced in Centric interchange listings for replacement matching.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer break-in time after brake service
- Fitment issues at the caliper interface
- Noise and vibration during front brake operation
Installation Notes
Verify front axle fitment before installation and confirm the vehicle is one of the listed applications. Inspect rotors, calipers, and slide hardware during service, and replace worn components as needed to support proper pad contact. Use the included hardware and shims where applicable, and follow standard brake bedding procedures after installation.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching to help remove impurities from the friction material before service. The pad set is asbestos free and built with fitment-focused details intended to support consistent wear and reduced noise in front brake applications.
