Centric 106.09490 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Brake Pads for Sprinter
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking performance, even wear, and reduced noise. This Centric brake pad set uses an OE-style positive molding process and is a direct fit for select Dodge Sprinter 2500 and Sprinter 3500 applications, including front and rear positions for 2003-2006 models.
The Posi-Quiet product line focuses on fitment accuracy and controlled friction behavior. For drivers searching for 2003-2006 Dodge Sprinter 2500 front brake pads or 2003-2006 Dodge Sprinter 3500 rear brake pads, part number 106.09490 delivers a semi-metallic formulation with shims and a pre-burnished finish to support smoother break-in.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent density across the pad
- Integrally molded friction attachment for stable pad structure
- Pad shims included to help reduce vibration-related noise
- Scorched surface to remove impurities and speed initial bedding
- Prepared for pad wear sensor use
- Asbestos-free friction formulation
- Centric part number 106.09490
Product Details
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are manufactured using a positive molding process similar to OE supplier methods. That process compresses the friction material under high pressure so the pad maintains uniform density, which supports even wear and predictable pedal response over time. Precision-cut or shaved backing plates and mechanically attached shims are used to improve caliper fit and reduce pad vibration noise. The scorching process further conditions the friction surface before installation, helping shorten the break-in period. This Centric brake pad set is a practical choice for Dodge Sprinter 2500 and Dodge Sprinter 3500 owners who need a direct replacement for front or rear brake service.
This part cross-references Wagner Brake SX949 and Raybestos Brakes SP949TRH for the same application.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer bedding time after brake service
- Reduced braking feel from worn front or rear pads
- Fitment issues related to caliper interface and backing plate shape
Installation Notes
Verify rotor condition, caliper hardware condition, and sensor requirements before installation. This pad set is prepared for pad wear sensor use, but a wear sensor is not included. Mounting hardware is not included. Clean the caliper bracket and contact points thoroughly, then follow the vehicle service procedure for bedding-in semi-metallic brake pads after installation. Confirm the correct position before ordering: Fits 2003-2006 Dodge Sprinter 2500, front; Fits 2003-2006 Dodge Sprinter 3500, front; Fits 2003-2006 Dodge Sprinter 3500, rear.
Quality Assurance
Centric designs the Posi-Quiet line with OE-style manufacturing methods, noise-control details, and asbestos-free friction materials. Part number 106.09490 is built to support consistent performance across the listed Dodge Sprinter applications.
Centric 106.09490 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Brake Pads for Sprinter
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking performance, even wear, and reduced noise. This Centric brake pad set uses an OE-style positive molding process and is a direct fit for select Dodge Sprinter 2500 and Sprinter 3500 applications, including front and rear positions for 2003-2006 models.
The Posi-Quiet product line focuses on fitment accuracy and controlled friction behavior. For drivers searching for 2003-2006 Dodge Sprinter 2500 front brake pads or 2003-2006 Dodge Sprinter 3500 rear brake pads, part number 106.09490 delivers a semi-metallic formulation with shims and a pre-burnished finish to support smoother break-in.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent density across the pad
- Integrally molded friction attachment for stable pad structure
- Pad shims included to help reduce vibration-related noise
- Scorched surface to remove impurities and speed initial bedding
- Prepared for pad wear sensor use
- Asbestos-free friction formulation
- Centric part number 106.09490
Product Details
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are manufactured using a positive molding process similar to OE supplier methods. That process compresses the friction material under high pressure so the pad maintains uniform density, which supports even wear and predictable pedal response over time. Precision-cut or shaved backing plates and mechanically attached shims are used to improve caliper fit and reduce pad vibration noise. The scorching process further conditions the friction surface before installation, helping shorten the break-in period. This Centric brake pad set is a practical choice for Dodge Sprinter 2500 and Dodge Sprinter 3500 owners who need a direct replacement for front or rear brake service.
This part cross-references Wagner Brake SX949 and Raybestos Brakes SP949TRH for the same application.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer bedding time after brake service
- Reduced braking feel from worn front or rear pads
- Fitment issues related to caliper interface and backing plate shape
Installation Notes
Verify rotor condition, caliper hardware condition, and sensor requirements before installation. This pad set is prepared for pad wear sensor use, but a wear sensor is not included. Mounting hardware is not included. Clean the caliper bracket and contact points thoroughly, then follow the vehicle service procedure for bedding-in semi-metallic brake pads after installation. Confirm the correct position before ordering: Fits 2003-2006 Dodge Sprinter 2500, front; Fits 2003-2006 Dodge Sprinter 3500, front; Fits 2003-2006 Dodge Sprinter 3500, rear.
Quality Assurance
Centric designs the Posi-Quiet line with OE-style manufacturing methods, noise-control details, and asbestos-free friction materials. Part number 106.09490 is built to support consistent performance across the listed Dodge Sprinter applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Brake Pads for Sprinter
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking performance, even wear, and reduced noise. This Centric brake pad set uses an OE-style positive molding process and is a direct fit for select Dodge Sprinter 2500 and Sprinter 3500 applications, including front and rear positions for 2003-2006 models.
The Posi-Quiet product line focuses on fitment accuracy and controlled friction behavior. For drivers searching for 2003-2006 Dodge Sprinter 2500 front brake pads or 2003-2006 Dodge Sprinter 3500 rear brake pads, part number 106.09490 delivers a semi-metallic formulation with shims and a pre-burnished finish to support smoother break-in.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for consistent density across the pad
- Integrally molded friction attachment for stable pad structure
- Pad shims included to help reduce vibration-related noise
- Scorched surface to remove impurities and speed initial bedding
- Prepared for pad wear sensor use
- Asbestos-free friction formulation
- Centric part number 106.09490
Product Details
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are manufactured using a positive molding process similar to OE supplier methods. That process compresses the friction material under high pressure so the pad maintains uniform density, which supports even wear and predictable pedal response over time. Precision-cut or shaved backing plates and mechanically attached shims are used to improve caliper fit and reduce pad vibration noise. The scorching process further conditions the friction surface before installation, helping shorten the break-in period. This Centric brake pad set is a practical choice for Dodge Sprinter 2500 and Dodge Sprinter 3500 owners who need a direct replacement for front or rear brake service.
This part cross-references Wagner Brake SX949 and Raybestos Brakes SP949TRH for the same application.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer bedding time after brake service
- Reduced braking feel from worn front or rear pads
- Fitment issues related to caliper interface and backing plate shape
Installation Notes
Verify rotor condition, caliper hardware condition, and sensor requirements before installation. This pad set is prepared for pad wear sensor use, but a wear sensor is not included. Mounting hardware is not included. Clean the caliper bracket and contact points thoroughly, then follow the vehicle service procedure for bedding-in semi-metallic brake pads after installation. Confirm the correct position before ordering: Fits 2003-2006 Dodge Sprinter 2500, front; Fits 2003-2006 Dodge Sprinter 3500, front; Fits 2003-2006 Dodge Sprinter 3500, rear.
Quality Assurance
Centric designs the Posi-Quiet line with OE-style manufacturing methods, noise-control details, and asbestos-free friction materials. Part number 106.09490 is built to support consistent performance across the listed Dodge Sprinter applications.
