Centric 106.10050 Disc Brake Pad Set - Front
Front Brake Pads for Lexus and Toyota
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10050 is built for front brake service on select Lexus and Toyota models. It combines semi-metallic friction with OE-style positive molding to promote consistent pad density, even wear, and stable braking performance.
This Centric Posi-Quiet brake pad line focuses on fit, noise control, and break-in consistency. The pads use precision-cut or shaved backing plates, mechanically attached shims, and a scorching process to help reduce vibration-related noise and speed up initial bedding.
Key Features
- Semi-metallic friction material for front disc brake applications
- Positive molded construction for uniform friction density
- Integrally molded friction attachment
- Pad shims included for noise control
- Mounting hardware included where applicable
- Pad wear sensor included and prepared for wear sensor use
- Asbestos-free formulation
- OE-style fitment details for caliper alignment
Product Details
Centric 106.10050 is part of the Posi-Quiet Extended Wear line, a brake pad family developed around OE supplier manufacturing methods. The positive molding process compresses the friction material under high pressure so the pad wears more evenly and maintains consistent braking characteristics over time. For drivers searching for front brake pads for a 2007-2009 Lexus RX350, 2006-2008 Lexus RX400h, 2006-2007 Toyota Highlander, or 2004-2006 Lexus RX330, this part provides a direct front axle solution with the fitment details listed below.
This part cross-references OE-TurboPower D1005 for the same application.
Vehicle Fitment
- Fits 2007-2009 Lexus RX350, front
- Fits 2006-2008 Lexus RX400h, front
- Fits 2006-2007 Toyota Highlander, front
- Fits 2004-2006 Lexus RX330, front
Common Issues This Part Can Address
- Front brake noise caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Brake pedal feel changes during pad break-in
- Fitment concerns when replacing worn front disc pads
- Wear sensor replacement needs on equipped vehicles
Installation Notes and Tips
Verify front axle fitment against your vehicle year, make, and model before installation. Inspect rotors, caliper hardware, and guide pins during pad replacement, and clean the caliper bracket surfaces so the shims and backing plates seat correctly. Follow the recommended bedding procedure after installation to help the pads settle in properly.
Quality Assurance
Centric manufactures Posi-Quiet pads using OE-style positive molding and adds scorching to remove impurities and pre-burnish the friction surface. The result is a brake pad set engineered for consistent density, controlled wear, and reduced noise-related returns.
Original: $37.56
-65%$37.56
$13.15Centric 106.10050 Disc Brake Pad Set - Front
Front Brake Pads for Lexus and Toyota
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10050 is built for front brake service on select Lexus and Toyota models. It combines semi-metallic friction with OE-style positive molding to promote consistent pad density, even wear, and stable braking performance.
This Centric Posi-Quiet brake pad line focuses on fit, noise control, and break-in consistency. The pads use precision-cut or shaved backing plates, mechanically attached shims, and a scorching process to help reduce vibration-related noise and speed up initial bedding.
Key Features
- Semi-metallic friction material for front disc brake applications
- Positive molded construction for uniform friction density
- Integrally molded friction attachment
- Pad shims included for noise control
- Mounting hardware included where applicable
- Pad wear sensor included and prepared for wear sensor use
- Asbestos-free formulation
- OE-style fitment details for caliper alignment
Product Details
Centric 106.10050 is part of the Posi-Quiet Extended Wear line, a brake pad family developed around OE supplier manufacturing methods. The positive molding process compresses the friction material under high pressure so the pad wears more evenly and maintains consistent braking characteristics over time. For drivers searching for front brake pads for a 2007-2009 Lexus RX350, 2006-2008 Lexus RX400h, 2006-2007 Toyota Highlander, or 2004-2006 Lexus RX330, this part provides a direct front axle solution with the fitment details listed below.
This part cross-references OE-TurboPower D1005 for the same application.
Vehicle Fitment
- Fits 2007-2009 Lexus RX350, front
- Fits 2006-2008 Lexus RX400h, front
- Fits 2006-2007 Toyota Highlander, front
- Fits 2004-2006 Lexus RX330, front
Common Issues This Part Can Address
- Front brake noise caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Brake pedal feel changes during pad break-in
- Fitment concerns when replacing worn front disc pads
- Wear sensor replacement needs on equipped vehicles
Installation Notes and Tips
Verify front axle fitment against your vehicle year, make, and model before installation. Inspect rotors, caliper hardware, and guide pins during pad replacement, and clean the caliper bracket surfaces so the shims and backing plates seat correctly. Follow the recommended bedding procedure after installation to help the pads settle in properly.
Quality Assurance
Centric manufactures Posi-Quiet pads using OE-style positive molding and adds scorching to remove impurities and pre-burnish the friction surface. The result is a brake pad set engineered for consistent density, controlled wear, and reduced noise-related returns.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Pads for Lexus and Toyota
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10050 is built for front brake service on select Lexus and Toyota models. It combines semi-metallic friction with OE-style positive molding to promote consistent pad density, even wear, and stable braking performance.
This Centric Posi-Quiet brake pad line focuses on fit, noise control, and break-in consistency. The pads use precision-cut or shaved backing plates, mechanically attached shims, and a scorching process to help reduce vibration-related noise and speed up initial bedding.
Key Features
- Semi-metallic friction material for front disc brake applications
- Positive molded construction for uniform friction density
- Integrally molded friction attachment
- Pad shims included for noise control
- Mounting hardware included where applicable
- Pad wear sensor included and prepared for wear sensor use
- Asbestos-free formulation
- OE-style fitment details for caliper alignment
Product Details
Centric 106.10050 is part of the Posi-Quiet Extended Wear line, a brake pad family developed around OE supplier manufacturing methods. The positive molding process compresses the friction material under high pressure so the pad wears more evenly and maintains consistent braking characteristics over time. For drivers searching for front brake pads for a 2007-2009 Lexus RX350, 2006-2008 Lexus RX400h, 2006-2007 Toyota Highlander, or 2004-2006 Lexus RX330, this part provides a direct front axle solution with the fitment details listed below.
This part cross-references OE-TurboPower D1005 for the same application.
Vehicle Fitment
- Fits 2007-2009 Lexus RX350, front
- Fits 2006-2008 Lexus RX400h, front
- Fits 2006-2007 Toyota Highlander, front
- Fits 2004-2006 Lexus RX330, front
Common Issues This Part Can Address
- Front brake noise caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Brake pedal feel changes during pad break-in
- Fitment concerns when replacing worn front disc pads
- Wear sensor replacement needs on equipped vehicles
Installation Notes and Tips
Verify front axle fitment against your vehicle year, make, and model before installation. Inspect rotors, caliper hardware, and guide pins during pad replacement, and clean the caliper bracket surfaces so the shims and backing plates seat correctly. Follow the recommended bedding procedure after installation to help the pads settle in properly.
Quality Assurance
Centric manufactures Posi-Quiet pads using OE-style positive molding and adds scorching to remove impurities and pre-burnish the friction surface. The result is a brake pad set engineered for consistent density, controlled wear, and reduced noise-related returns.
