Centric 106.10200 Disc Brake Pad Set - Rear
Centric Rear Brake Pads for Cadillac STS, SRX, CTS
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10200 is built for rear brake service on select Cadillac STS, SRX, and CTS applications. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
Key Features
- Posi-Quiet Extended Wear semi-metallic friction material
- Positive molded construction for uniform friction density
- Integrally molded friction attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Asbestos-free formulation
Product Details
Centric’s Posi-Quiet brake pad line focuses on consistent pedal feel, controlled wear, and reduced brake noise. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain even performance across the life of the pad. For added refinement, the pads use shims and backing plate finishing details that support proper caliper fitment and help limit vibration noise. Part number 106.10200 is a rear disc brake pad set for 2004-2009 Cadillac SRX, 2005 Cadillac STS, 2006-2007 Cadillac CTS, and 2006-2011 Cadillac STS rear brake service. This part cross-references Centric Parts 301.10200 for the same application.
Common Brake Issues It Can Address
- Squealing or vibration-related brake noise
- Uneven pad wear from inconsistent friction density
- Delayed brake response during pad break-in
- Fitment concerns caused by worn or poorly finished backing plates
- Brake service needs on rear Cadillac STS, SRX, or CTS applications
Installation Notes
Verify rear axle fitment before installation and confirm the vehicle uses the listed application. Inspect calipers, rotors, and sensor connections during service, and replace worn hardware or damaged components as needed. The pre-scorched friction surface can shorten break-in time, but proper bedding-in procedures should still be followed after installation. Part number 106.10200 is supplied with wear sensor provisions for the listed applications.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction formulations. The pads are asbestos-free and built with shims and backing plate details intended to support consistent operation and reduced noise over time.
Original: $48.48
-65%$48.48
$16.97Centric 106.10200 Disc Brake Pad Set - Rear
Centric Rear Brake Pads for Cadillac STS, SRX, CTS
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10200 is built for rear brake service on select Cadillac STS, SRX, and CTS applications. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
Key Features
- Posi-Quiet Extended Wear semi-metallic friction material
- Positive molded construction for uniform friction density
- Integrally molded friction attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Asbestos-free formulation
Product Details
Centric’s Posi-Quiet brake pad line focuses on consistent pedal feel, controlled wear, and reduced brake noise. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain even performance across the life of the pad. For added refinement, the pads use shims and backing plate finishing details that support proper caliper fitment and help limit vibration noise. Part number 106.10200 is a rear disc brake pad set for 2004-2009 Cadillac SRX, 2005 Cadillac STS, 2006-2007 Cadillac CTS, and 2006-2011 Cadillac STS rear brake service. This part cross-references Centric Parts 301.10200 for the same application.
Common Brake Issues It Can Address
- Squealing or vibration-related brake noise
- Uneven pad wear from inconsistent friction density
- Delayed brake response during pad break-in
- Fitment concerns caused by worn or poorly finished backing plates
- Brake service needs on rear Cadillac STS, SRX, or CTS applications
Installation Notes
Verify rear axle fitment before installation and confirm the vehicle uses the listed application. Inspect calipers, rotors, and sensor connections during service, and replace worn hardware or damaged components as needed. The pre-scorched friction surface can shorten break-in time, but proper bedding-in procedures should still be followed after installation. Part number 106.10200 is supplied with wear sensor provisions for the listed applications.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction formulations. The pads are asbestos-free and built with shims and backing plate details intended to support consistent operation and reduced noise over time.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Rear Brake Pads for Cadillac STS, SRX, CTS
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10200 is built for rear brake service on select Cadillac STS, SRX, and CTS applications. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
Key Features
- Posi-Quiet Extended Wear semi-metallic friction material
- Positive molded construction for uniform friction density
- Integrally molded friction attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Asbestos-free formulation
Product Details
Centric’s Posi-Quiet brake pad line focuses on consistent pedal feel, controlled wear, and reduced brake noise. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain even performance across the life of the pad. For added refinement, the pads use shims and backing plate finishing details that support proper caliper fitment and help limit vibration noise. Part number 106.10200 is a rear disc brake pad set for 2004-2009 Cadillac SRX, 2005 Cadillac STS, 2006-2007 Cadillac CTS, and 2006-2011 Cadillac STS rear brake service. This part cross-references Centric Parts 301.10200 for the same application.
Common Brake Issues It Can Address
- Squealing or vibration-related brake noise
- Uneven pad wear from inconsistent friction density
- Delayed brake response during pad break-in
- Fitment concerns caused by worn or poorly finished backing plates
- Brake service needs on rear Cadillac STS, SRX, or CTS applications
Installation Notes
Verify rear axle fitment before installation and confirm the vehicle uses the listed application. Inspect calipers, rotors, and sensor connections during service, and replace worn hardware or damaged components as needed. The pre-scorched friction surface can shorten break-in time, but proper bedding-in procedures should still be followed after installation. Part number 106.10200 is supplied with wear sensor provisions for the listed applications.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction formulations. The pads are asbestos-free and built with shims and backing plate details intended to support consistent operation and reduced noise over time.
