Centric 106.10390 Disc Brake Pad Set - Front
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10390 is built for front brake service on select Chevrolet Colorado, GMC Canyon, and Isuzu i-290, i-370, i-280, and i-350 models. This Centric brake pad set uses a semi-metallic friction formula with OE-style positive molding for consistent density, wear, and pedal response.
The Posi-Quiet line focuses on fit, noise control, and break-in performance. For applications like the Chevrolet Colorado front brake pads and GMC Canyon front brake pads, the pad design includes precision-cut or shaved backing plates, mechanically attached shims, and a scorching process to help remove impurities and speed initial bedding.
- Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set
- Part number 106.10390
- Semi-metallic friction material
- Positive molded friction for even density and wear
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched surface to accelerate break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware and pad shims included
- Asbestos-free friction formulation
Product Details and Fitment
Centric 106.10390 is a front disc brake pad set for 2004-2008 Chevrolet Colorado, 2004-2008 GMC Canyon, 2006 Isuzu i-280, 2006 Isuzu i-350, 2007-2008 Isuzu i-290, and 2007-2008 Isuzu i-370. This part cross-references Gates (e.g., 24370, 24594) for the same application.
Use this brake pad set when replacing worn front pads on a Colorado, Canyon, or related Isuzu truck platform and you want OE-style construction with noise-focused hardware details. The part number 106.10390 is also useful for shoppers searching for front brake pads for 2004-2008 Chevrolet Colorado or 2004-2008 GMC Canyon.
Common Problems It Can Address
- Squealing or vibration-related brake noise
- Uneven pad wear from inconsistent friction density
- Reduced braking performance from worn front pads
- Longer break-in time after brake service
- Fitment issues caused by backing plate or shim mismatch
Installation Notes and Tips
Install on the front axle only for the listed applications. Inspect rotors, calipers, and pad hardware before assembly, and replace any worn components that could affect pad movement or noise. Clean the caliper bracket and rotor surfaces, then follow the vehicle manufacturer’s bedding procedure after installation.
For best results, verify the vehicle year, make, model, and front position before ordering Centric 106.10390. The included wear sensor and hardware details should be matched to the original brake setup on the vehicle.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process to promote consistent friction material density. The line also uses scorched friction material and noise-control shims to support stable performance and reduced brake vibration. All Posi-Quiet friction formulations are asbestos free.
Original: $42.31
-65%$42.31
$14.81Centric 106.10390 Disc Brake Pad Set - Front
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10390 is built for front brake service on select Chevrolet Colorado, GMC Canyon, and Isuzu i-290, i-370, i-280, and i-350 models. This Centric brake pad set uses a semi-metallic friction formula with OE-style positive molding for consistent density, wear, and pedal response.
The Posi-Quiet line focuses on fit, noise control, and break-in performance. For applications like the Chevrolet Colorado front brake pads and GMC Canyon front brake pads, the pad design includes precision-cut or shaved backing plates, mechanically attached shims, and a scorching process to help remove impurities and speed initial bedding.
- Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set
- Part number 106.10390
- Semi-metallic friction material
- Positive molded friction for even density and wear
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched surface to accelerate break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware and pad shims included
- Asbestos-free friction formulation
Product Details and Fitment
Centric 106.10390 is a front disc brake pad set for 2004-2008 Chevrolet Colorado, 2004-2008 GMC Canyon, 2006 Isuzu i-280, 2006 Isuzu i-350, 2007-2008 Isuzu i-290, and 2007-2008 Isuzu i-370. This part cross-references Gates (e.g., 24370, 24594) for the same application.
Use this brake pad set when replacing worn front pads on a Colorado, Canyon, or related Isuzu truck platform and you want OE-style construction with noise-focused hardware details. The part number 106.10390 is also useful for shoppers searching for front brake pads for 2004-2008 Chevrolet Colorado or 2004-2008 GMC Canyon.
Common Problems It Can Address
- Squealing or vibration-related brake noise
- Uneven pad wear from inconsistent friction density
- Reduced braking performance from worn front pads
- Longer break-in time after brake service
- Fitment issues caused by backing plate or shim mismatch
Installation Notes and Tips
Install on the front axle only for the listed applications. Inspect rotors, calipers, and pad hardware before assembly, and replace any worn components that could affect pad movement or noise. Clean the caliper bracket and rotor surfaces, then follow the vehicle manufacturer’s bedding procedure after installation.
For best results, verify the vehicle year, make, model, and front position before ordering Centric 106.10390. The included wear sensor and hardware details should be matched to the original brake setup on the vehicle.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process to promote consistent friction material density. The line also uses scorched friction material and noise-control shims to support stable performance and reduced brake vibration. All Posi-Quiet friction formulations are asbestos free.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10390 is built for front brake service on select Chevrolet Colorado, GMC Canyon, and Isuzu i-290, i-370, i-280, and i-350 models. This Centric brake pad set uses a semi-metallic friction formula with OE-style positive molding for consistent density, wear, and pedal response.
The Posi-Quiet line focuses on fit, noise control, and break-in performance. For applications like the Chevrolet Colorado front brake pads and GMC Canyon front brake pads, the pad design includes precision-cut or shaved backing plates, mechanically attached shims, and a scorching process to help remove impurities and speed initial bedding.
- Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set
- Part number 106.10390
- Semi-metallic friction material
- Positive molded friction for even density and wear
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched surface to accelerate break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware and pad shims included
- Asbestos-free friction formulation
Product Details and Fitment
Centric 106.10390 is a front disc brake pad set for 2004-2008 Chevrolet Colorado, 2004-2008 GMC Canyon, 2006 Isuzu i-280, 2006 Isuzu i-350, 2007-2008 Isuzu i-290, and 2007-2008 Isuzu i-370. This part cross-references Gates (e.g., 24370, 24594) for the same application.
Use this brake pad set when replacing worn front pads on a Colorado, Canyon, or related Isuzu truck platform and you want OE-style construction with noise-focused hardware details. The part number 106.10390 is also useful for shoppers searching for front brake pads for 2004-2008 Chevrolet Colorado or 2004-2008 GMC Canyon.
Common Problems It Can Address
- Squealing or vibration-related brake noise
- Uneven pad wear from inconsistent friction density
- Reduced braking performance from worn front pads
- Longer break-in time after brake service
- Fitment issues caused by backing plate or shim mismatch
Installation Notes and Tips
Install on the front axle only for the listed applications. Inspect rotors, calipers, and pad hardware before assembly, and replace any worn components that could affect pad movement or noise. Clean the caliper bracket and rotor surfaces, then follow the vehicle manufacturer’s bedding procedure after installation.
For best results, verify the vehicle year, make, model, and front position before ordering Centric 106.10390. The included wear sensor and hardware details should be matched to the original brake setup on the vehicle.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process to promote consistent friction material density. The line also uses scorched friction material and noise-control shims to support stable performance and reduced brake vibration. All Posi-Quiet friction formulations are asbestos free.
