Centric 106.10460 Disc Brake Pad Set - Rear
Centric Rear Brake Pads for Ford E-Series
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10460 is built for rear brake service on select Ford E-150, Econoline, and E-150 Club Wagon applications. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
Key Features
- Semi-metallic friction material for rear disc brake service
- Positive molded construction for uniform friction density
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce pad vibration noise
- Scorched friction surface to remove impurities and speed break-in
- Asbestos-free friction formulation
- Mounting hardware included where applicable
- Prepared for pad wear sensor use
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on fit, consistency, and noise control. For part number 106.10460, the pad friction material is integrally molded to the backing plate, and the design includes shims and hardware for a more complete brake service. The pads are also pre-burnished through a scorching process, which helps shorten the initial bedding period after installation. This rear brake pad set is a direct service option for 2004-2006 Ford E-150 rear brake repair, 2006 Ford Econoline rear brake repair, and 2004-2005 Ford E-150 Club Wagon rear brake repair. This part cross-references Bendix Fleet Metlok (e.g., MKD1046FM) for the same application. Part number 106.10460 is also listed under Centric Parts references for the same brake pad family.
Common Problems It Can Address
- Rear brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Brake pulsation concerns related to poor pad fitment
- Extended break-in time after brake service
- Worn rear disc brake pads on Ford E-Series vans and wagons
Installation Notes
Verify rear axle brake pad dimensions and caliper hardware before installation. Clean the caliper bracket and pad contact points, then inspect rotors, slides, and wear sensor provisions during service. For 2004-2006 Ford E-150 rear brake pad replacement, 2006 Ford Econoline rear brake pad replacement, and 2004-2005 Ford E-150 Club Wagon rear brake pad replacement, follow the vehicle service manual for bedding and torque procedures.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process and adds scorching, shims, and precision backing plate preparation to support consistent performance and reduced noise. The friction material is asbestos free.
Original: $34.17
-65%$34.17
$11.96Centric 106.10460 Disc Brake Pad Set - Rear
Centric Rear Brake Pads for Ford E-Series
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10460 is built for rear brake service on select Ford E-150, Econoline, and E-150 Club Wagon applications. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
Key Features
- Semi-metallic friction material for rear disc brake service
- Positive molded construction for uniform friction density
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce pad vibration noise
- Scorched friction surface to remove impurities and speed break-in
- Asbestos-free friction formulation
- Mounting hardware included where applicable
- Prepared for pad wear sensor use
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on fit, consistency, and noise control. For part number 106.10460, the pad friction material is integrally molded to the backing plate, and the design includes shims and hardware for a more complete brake service. The pads are also pre-burnished through a scorching process, which helps shorten the initial bedding period after installation. This rear brake pad set is a direct service option for 2004-2006 Ford E-150 rear brake repair, 2006 Ford Econoline rear brake repair, and 2004-2005 Ford E-150 Club Wagon rear brake repair. This part cross-references Bendix Fleet Metlok (e.g., MKD1046FM) for the same application. Part number 106.10460 is also listed under Centric Parts references for the same brake pad family.
Common Problems It Can Address
- Rear brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Brake pulsation concerns related to poor pad fitment
- Extended break-in time after brake service
- Worn rear disc brake pads on Ford E-Series vans and wagons
Installation Notes
Verify rear axle brake pad dimensions and caliper hardware before installation. Clean the caliper bracket and pad contact points, then inspect rotors, slides, and wear sensor provisions during service. For 2004-2006 Ford E-150 rear brake pad replacement, 2006 Ford Econoline rear brake pad replacement, and 2004-2005 Ford E-150 Club Wagon rear brake pad replacement, follow the vehicle service manual for bedding and torque procedures.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process and adds scorching, shims, and precision backing plate preparation to support consistent performance and reduced noise. The friction material is asbestos free.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Rear Brake Pads for Ford E-Series
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10460 is built for rear brake service on select Ford E-150, Econoline, and E-150 Club Wagon applications. It uses a semi-metallic friction formula with OE-style positive molding to promote consistent density, even wear, and stable braking performance.
Key Features
- Semi-metallic friction material for rear disc brake service
- Positive molded construction for uniform friction density
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce pad vibration noise
- Scorched friction surface to remove impurities and speed break-in
- Asbestos-free friction formulation
- Mounting hardware included where applicable
- Prepared for pad wear sensor use
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on fit, consistency, and noise control. For part number 106.10460, the pad friction material is integrally molded to the backing plate, and the design includes shims and hardware for a more complete brake service. The pads are also pre-burnished through a scorching process, which helps shorten the initial bedding period after installation. This rear brake pad set is a direct service option for 2004-2006 Ford E-150 rear brake repair, 2006 Ford Econoline rear brake repair, and 2004-2005 Ford E-150 Club Wagon rear brake repair. This part cross-references Bendix Fleet Metlok (e.g., MKD1046FM) for the same application. Part number 106.10460 is also listed under Centric Parts references for the same brake pad family.
Common Problems It Can Address
- Rear brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Brake pulsation concerns related to poor pad fitment
- Extended break-in time after brake service
- Worn rear disc brake pads on Ford E-Series vans and wagons
Installation Notes
Verify rear axle brake pad dimensions and caliper hardware before installation. Clean the caliper bracket and pad contact points, then inspect rotors, slides, and wear sensor provisions during service. For 2004-2006 Ford E-150 rear brake pad replacement, 2006 Ford Econoline rear brake pad replacement, and 2004-2005 Ford E-150 Club Wagon rear brake pad replacement, follow the vehicle service manual for bedding and torque procedures.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process and adds scorching, shims, and precision backing plate preparation to support consistent performance and reduced noise. The friction material is asbestos free.
