Centric 106.10570 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet XT Rear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10570 is built for drivers who want consistent braking feel, controlled wear, and reduced noise on select Chrysler and Dodge rear brake applications. This semi-metallic disc brake pad set uses OE-style manufacturing methods and includes wear sensor provisions for the listed vehicles.
Key Features
- Semi-metallic friction material for balanced stopping performance
- Positive-molded friction material for consistent density and wear
- Integrally molded friction attachment for stable pad construction
- Precision-cut or shaved backing plates to improve caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware and pad shims included where applicable
Product Details
The Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets line is engineered around OE-style positive molding, which compresses the friction material under high pressure for uniform density across the pad. That helps support even wear and predictable pedal response over time. Centric also uses backing plate and shim details that address common brake complaints such as squeal and vibration, while the scorching process helps the pads seat faster after installation. Part number 106.10570 is a direct-fit rear brake pad option for select Chrysler 300, Dodge Charger, Dodge Challenger, and Dodge Magnum models.
This part cross-references Wagner Brake SX1057B and Gates 24163 for the same application.
Vehicle Fitment
- Fits 2022-2023 Chrysler 300, front.
- Fits 2021-2023 Dodge Charger, rear.
- Fits 2022 Dodge Challenger, rear.
- Fits 2005-2021 Chrysler 300, rear.
- Fits 2009-2021 Dodge Challenger, rear.
- Fits 2006-2020 Dodge Charger, rear.
- Fits 2014 Dodge Avenger, rear.
- Fits 2005-2008 Dodge Magnum, rear.
Common Issues This Part Can Address
- Brake squeal during light or moderate stops
- Brake vibration caused by pad movement in the caliper
- Uneven pad wear from inconsistent friction density
- Delayed pad bedding after brake service
- Wear sensor replacement needs on listed applications
Installation Notes
Verify rotor condition, caliper hardware condition, and sensor routing before installation. Clean the caliper bracket and pad contact points, then follow the vehicle-specific break-in procedure after installation. Confirm rear brake pad fitment against the listed Chrysler and Dodge applications before ordering, including the correct model year and position.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction formulations that are asbestos free. The pad design also incorporates shims and backing plate finishing details to support consistent fitment and quieter operation on the specified vehicles.
Original: $38.15
-65%$38.15
$13.35Centric 106.10570 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet XT Rear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10570 is built for drivers who want consistent braking feel, controlled wear, and reduced noise on select Chrysler and Dodge rear brake applications. This semi-metallic disc brake pad set uses OE-style manufacturing methods and includes wear sensor provisions for the listed vehicles.
Key Features
- Semi-metallic friction material for balanced stopping performance
- Positive-molded friction material for consistent density and wear
- Integrally molded friction attachment for stable pad construction
- Precision-cut or shaved backing plates to improve caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware and pad shims included where applicable
Product Details
The Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets line is engineered around OE-style positive molding, which compresses the friction material under high pressure for uniform density across the pad. That helps support even wear and predictable pedal response over time. Centric also uses backing plate and shim details that address common brake complaints such as squeal and vibration, while the scorching process helps the pads seat faster after installation. Part number 106.10570 is a direct-fit rear brake pad option for select Chrysler 300, Dodge Charger, Dodge Challenger, and Dodge Magnum models.
This part cross-references Wagner Brake SX1057B and Gates 24163 for the same application.
Vehicle Fitment
- Fits 2022-2023 Chrysler 300, front.
- Fits 2021-2023 Dodge Charger, rear.
- Fits 2022 Dodge Challenger, rear.
- Fits 2005-2021 Chrysler 300, rear.
- Fits 2009-2021 Dodge Challenger, rear.
- Fits 2006-2020 Dodge Charger, rear.
- Fits 2014 Dodge Avenger, rear.
- Fits 2005-2008 Dodge Magnum, rear.
Common Issues This Part Can Address
- Brake squeal during light or moderate stops
- Brake vibration caused by pad movement in the caliper
- Uneven pad wear from inconsistent friction density
- Delayed pad bedding after brake service
- Wear sensor replacement needs on listed applications
Installation Notes
Verify rotor condition, caliper hardware condition, and sensor routing before installation. Clean the caliper bracket and pad contact points, then follow the vehicle-specific break-in procedure after installation. Confirm rear brake pad fitment against the listed Chrysler and Dodge applications before ordering, including the correct model year and position.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction formulations that are asbestos free. The pad design also incorporates shims and backing plate finishing details to support consistent fitment and quieter operation on the specified vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet XT Rear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.10570 is built for drivers who want consistent braking feel, controlled wear, and reduced noise on select Chrysler and Dodge rear brake applications. This semi-metallic disc brake pad set uses OE-style manufacturing methods and includes wear sensor provisions for the listed vehicles.
Key Features
- Semi-metallic friction material for balanced stopping performance
- Positive-molded friction material for consistent density and wear
- Integrally molded friction attachment for stable pad construction
- Precision-cut or shaved backing plates to improve caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware and pad shims included where applicable
Product Details
The Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets line is engineered around OE-style positive molding, which compresses the friction material under high pressure for uniform density across the pad. That helps support even wear and predictable pedal response over time. Centric also uses backing plate and shim details that address common brake complaints such as squeal and vibration, while the scorching process helps the pads seat faster after installation. Part number 106.10570 is a direct-fit rear brake pad option for select Chrysler 300, Dodge Charger, Dodge Challenger, and Dodge Magnum models.
This part cross-references Wagner Brake SX1057B and Gates 24163 for the same application.
Vehicle Fitment
- Fits 2022-2023 Chrysler 300, front.
- Fits 2021-2023 Dodge Charger, rear.
- Fits 2022 Dodge Challenger, rear.
- Fits 2005-2021 Chrysler 300, rear.
- Fits 2009-2021 Dodge Challenger, rear.
- Fits 2006-2020 Dodge Charger, rear.
- Fits 2014 Dodge Avenger, rear.
- Fits 2005-2008 Dodge Magnum, rear.
Common Issues This Part Can Address
- Brake squeal during light or moderate stops
- Brake vibration caused by pad movement in the caliper
- Uneven pad wear from inconsistent friction density
- Delayed pad bedding after brake service
- Wear sensor replacement needs on listed applications
Installation Notes
Verify rotor condition, caliper hardware condition, and sensor routing before installation. Clean the caliper bracket and pad contact points, then follow the vehicle-specific break-in procedure after installation. Confirm rear brake pad fitment against the listed Chrysler and Dodge applications before ordering, including the correct model year and position.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction formulations that are asbestos free. The pad design also incorporates shims and backing plate finishing details to support consistent fitment and quieter operation on the specified vehicles.
