Centric 106.10620 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking feel, even wear, and reduced noise. Part number 106.10620 uses a semi-metallic friction formula with integrally molded construction, precision-fit backing plates, and shims to support quiet operation in everyday driving.
Compatible With applications that call for Centric 106.10620, this brake pad set is a practical choice for drivers looking for OE-style fit and predictable pedal response. It is also a relevant search match for Honda Civic brake pad replacement and other vehicle-specific disc brake pad applications that reference this part number.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molding process for consistent friction density across the pad
- Integrally molded friction attachment for stable pad construction
- Pad shims included to help reduce vibration-related noise
- Precision cut or shaved backing plates for caliper fitment
- Scorched friction surface to accelerate initial break-in
- Asbestos-free friction formulation
- Prepared for pad wear sensor applications
Product Details
The Centric Posi-Quiet line focuses on brake pad consistency and noise control. Centric uses a positive molding process similar to OE supplier methods, compressing the friction material under high pressure so density stays uniform through the pad. That helps support even wear and stable performance over the service life of the pad. The Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set, part number 106.10620, also includes mechanically attached shims and carefully finished backing plates to improve caliper fit and reduce brake squeal.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Search terms such as Centric 106.10620, 106.10620 brake pads, and Honda Civic brake pads can help identify the correct replacement when matching by part number and vehicle application.
Common Issues This Part May Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Initial brake fade during the break-in period
- Poor caliper fit from imprecise backing plate dimensions
- Noise and vibration complaints during normal braking
Installation Notes
Verify vehicle-specific brake pad dimensions before installation. This set is prepared for pad wear sensor applications, but pad wear sensors are not included. Mounting hardware is not included. Clean the caliper bracket and inspect rotors, slides, and hardware condition before installing Centric 106.10620 to help maintain quiet operation and even pad contact.
Quality Assurance
Centric applies an OE-style positive molding process and a scorching step to remove impurities and pre-burnish the friction surface. The Posi-Quiet line is engineered with asbestos-free friction materials and design details aimed at consistent wear, stable braking performance, and reduced noise over the service life of the pad.
Centric 106.10620 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking feel, even wear, and reduced noise. Part number 106.10620 uses a semi-metallic friction formula with integrally molded construction, precision-fit backing plates, and shims to support quiet operation in everyday driving.
Compatible With applications that call for Centric 106.10620, this brake pad set is a practical choice for drivers looking for OE-style fit and predictable pedal response. It is also a relevant search match for Honda Civic brake pad replacement and other vehicle-specific disc brake pad applications that reference this part number.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molding process for consistent friction density across the pad
- Integrally molded friction attachment for stable pad construction
- Pad shims included to help reduce vibration-related noise
- Precision cut or shaved backing plates for caliper fitment
- Scorched friction surface to accelerate initial break-in
- Asbestos-free friction formulation
- Prepared for pad wear sensor applications
Product Details
The Centric Posi-Quiet line focuses on brake pad consistency and noise control. Centric uses a positive molding process similar to OE supplier methods, compressing the friction material under high pressure so density stays uniform through the pad. That helps support even wear and stable performance over the service life of the pad. The Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set, part number 106.10620, also includes mechanically attached shims and carefully finished backing plates to improve caliper fit and reduce brake squeal.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Search terms such as Centric 106.10620, 106.10620 brake pads, and Honda Civic brake pads can help identify the correct replacement when matching by part number and vehicle application.
Common Issues This Part May Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Initial brake fade during the break-in period
- Poor caliper fit from imprecise backing plate dimensions
- Noise and vibration complaints during normal braking
Installation Notes
Verify vehicle-specific brake pad dimensions before installation. This set is prepared for pad wear sensor applications, but pad wear sensors are not included. Mounting hardware is not included. Clean the caliper bracket and inspect rotors, slides, and hardware condition before installing Centric 106.10620 to help maintain quiet operation and even pad contact.
Quality Assurance
Centric applies an OE-style positive molding process and a scorching step to remove impurities and pre-burnish the friction surface. The Posi-Quiet line is engineered with asbestos-free friction materials and design details aimed at consistent wear, stable braking performance, and reduced noise over the service life of the pad.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking feel, even wear, and reduced noise. Part number 106.10620 uses a semi-metallic friction formula with integrally molded construction, precision-fit backing plates, and shims to support quiet operation in everyday driving.
Compatible With applications that call for Centric 106.10620, this brake pad set is a practical choice for drivers looking for OE-style fit and predictable pedal response. It is also a relevant search match for Honda Civic brake pad replacement and other vehicle-specific disc brake pad applications that reference this part number.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molding process for consistent friction density across the pad
- Integrally molded friction attachment for stable pad construction
- Pad shims included to help reduce vibration-related noise
- Precision cut or shaved backing plates for caliper fitment
- Scorched friction surface to accelerate initial break-in
- Asbestos-free friction formulation
- Prepared for pad wear sensor applications
Product Details
The Centric Posi-Quiet line focuses on brake pad consistency and noise control. Centric uses a positive molding process similar to OE supplier methods, compressing the friction material under high pressure so density stays uniform through the pad. That helps support even wear and stable performance over the service life of the pad. The Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set, part number 106.10620, also includes mechanically attached shims and carefully finished backing plates to improve caliper fit and reduce brake squeal.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Search terms such as Centric 106.10620, 106.10620 brake pads, and Honda Civic brake pads can help identify the correct replacement when matching by part number and vehicle application.
Common Issues This Part May Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Initial brake fade during the break-in period
- Poor caliper fit from imprecise backing plate dimensions
- Noise and vibration complaints during normal braking
Installation Notes
Verify vehicle-specific brake pad dimensions before installation. This set is prepared for pad wear sensor applications, but pad wear sensors are not included. Mounting hardware is not included. Clean the caliper bracket and inspect rotors, slides, and hardware condition before installing Centric 106.10620 to help maintain quiet operation and even pad contact.
Quality Assurance
Centric applies an OE-style positive molding process and a scorching step to remove impurities and pre-burnish the friction surface. The Posi-Quiet line is engineered with asbestos-free friction materials and design details aimed at consistent wear, stable braking performance, and reduced noise over the service life of the pad.
