Centric 106.10640 Disc Brake Pad Set - Rear
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking feel, even wear, and reduced noise. Part number 106.10640 uses an OE-style positive molding process and includes precision-fit details that support stable caliper operation on compatible brake applications.
For drivers searching for semi-metallic brake pads for Honda Civic, Toyota Camry, or similar passenger vehicle brake service, this Centric Posi-Quiet set is engineered with the fitment details and friction material characteristics that matter in everyday stopping performance.
Key Features
- Semi-metallic friction material for dependable braking response
- Positive molded construction for consistent friction density across the pad
- Integrally molded friction attachment for stable pad construction
- Mechanically attached shims to help reduce vibration-related noise
- Precision cut or shaved backing plates for caliper fitment
- Scorched friction surface to remove impurities and speed break-in
- Pad wear sensor included and prepared for wear sensor applications
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on OE-style manufacturing methods and application-specific brake pad construction. The positive molding process compresses the friction material under high pressure so the pad maintains uniform density, which helps support even wear and predictable performance over time. This part number, 106.10640, also uses shims and backing plate finishing details that address common brake complaints such as noise and vibration.
The pads are semi-metallic and include a scorched surface treatment to help remove impurities from the friction material and shorten the initial break-in period. With pad wear sensor preparation, included sensor hardware, and fitment-focused construction, this set is suited for drivers looking for a direct replacement brake pad solution for Honda Civic, Toyota Camry, and other listed applications. This part cross-references Wagner Brake SX1064 for the same application.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer brake-in time after pad replacement
- Fitment issues related to backing plate shape or caliper clearance
- Wear sensor service needs on equipped vehicles
Installation Notes
Verify rotor condition, caliper hardware condition, and sensor routing before installation. Clean the caliper bracket and contact points, then install the pads with the supplied shims and hardware where applicable. After installation, follow a proper bedding procedure to help the friction material transfer evenly to the rotor surface.
Fits the listed vehicle applications by year, make, model, and position only where confirmed in the catalog data. Part number 106.10640 should be matched to the exact brake configuration before ordering.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction formulations. The pads are asbestos free and include design features aimed at consistent wear, stable fitment, and reduced noise and vibration.
Centric 106.10640 Disc Brake Pad Set - Rear
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking feel, even wear, and reduced noise. Part number 106.10640 uses an OE-style positive molding process and includes precision-fit details that support stable caliper operation on compatible brake applications.
For drivers searching for semi-metallic brake pads for Honda Civic, Toyota Camry, or similar passenger vehicle brake service, this Centric Posi-Quiet set is engineered with the fitment details and friction material characteristics that matter in everyday stopping performance.
Key Features
- Semi-metallic friction material for dependable braking response
- Positive molded construction for consistent friction density across the pad
- Integrally molded friction attachment for stable pad construction
- Mechanically attached shims to help reduce vibration-related noise
- Precision cut or shaved backing plates for caliper fitment
- Scorched friction surface to remove impurities and speed break-in
- Pad wear sensor included and prepared for wear sensor applications
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on OE-style manufacturing methods and application-specific brake pad construction. The positive molding process compresses the friction material under high pressure so the pad maintains uniform density, which helps support even wear and predictable performance over time. This part number, 106.10640, also uses shims and backing plate finishing details that address common brake complaints such as noise and vibration.
The pads are semi-metallic and include a scorched surface treatment to help remove impurities from the friction material and shorten the initial break-in period. With pad wear sensor preparation, included sensor hardware, and fitment-focused construction, this set is suited for drivers looking for a direct replacement brake pad solution for Honda Civic, Toyota Camry, and other listed applications. This part cross-references Wagner Brake SX1064 for the same application.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer brake-in time after pad replacement
- Fitment issues related to backing plate shape or caliper clearance
- Wear sensor service needs on equipped vehicles
Installation Notes
Verify rotor condition, caliper hardware condition, and sensor routing before installation. Clean the caliper bracket and contact points, then install the pads with the supplied shims and hardware where applicable. After installation, follow a proper bedding procedure to help the friction material transfer evenly to the rotor surface.
Fits the listed vehicle applications by year, make, model, and position only where confirmed in the catalog data. Part number 106.10640 should be matched to the exact brake configuration before ordering.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction formulations. The pads are asbestos free and include design features aimed at consistent wear, stable fitment, and reduced noise and vibration.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking feel, even wear, and reduced noise. Part number 106.10640 uses an OE-style positive molding process and includes precision-fit details that support stable caliper operation on compatible brake applications.
For drivers searching for semi-metallic brake pads for Honda Civic, Toyota Camry, or similar passenger vehicle brake service, this Centric Posi-Quiet set is engineered with the fitment details and friction material characteristics that matter in everyday stopping performance.
Key Features
- Semi-metallic friction material for dependable braking response
- Positive molded construction for consistent friction density across the pad
- Integrally molded friction attachment for stable pad construction
- Mechanically attached shims to help reduce vibration-related noise
- Precision cut or shaved backing plates for caliper fitment
- Scorched friction surface to remove impurities and speed break-in
- Pad wear sensor included and prepared for wear sensor applications
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on OE-style manufacturing methods and application-specific brake pad construction. The positive molding process compresses the friction material under high pressure so the pad maintains uniform density, which helps support even wear and predictable performance over time. This part number, 106.10640, also uses shims and backing plate finishing details that address common brake complaints such as noise and vibration.
The pads are semi-metallic and include a scorched surface treatment to help remove impurities from the friction material and shorten the initial break-in period. With pad wear sensor preparation, included sensor hardware, and fitment-focused construction, this set is suited for drivers looking for a direct replacement brake pad solution for Honda Civic, Toyota Camry, and other listed applications. This part cross-references Wagner Brake SX1064 for the same application.
What It Helps Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer brake-in time after pad replacement
- Fitment issues related to backing plate shape or caliper clearance
- Wear sensor service needs on equipped vehicles
Installation Notes
Verify rotor condition, caliper hardware condition, and sensor routing before installation. Clean the caliper bracket and contact points, then install the pads with the supplied shims and hardware where applicable. After installation, follow a proper bedding procedure to help the friction material transfer evenly to the rotor surface.
Fits the listed vehicle applications by year, make, model, and position only where confirmed in the catalog data. Part number 106.10640 should be matched to the exact brake configuration before ordering.
Quality Assurance
Centric manufactures the Posi-Quiet line using OE-style positive molding and application-specific friction formulations. The pads are asbestos free and include design features aimed at consistent wear, stable fitment, and reduced noise and vibration.
