Centric 106.11360 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Brake Pads for Sprinter
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.11360 is built for drivers who need consistent braking performance and controlled noise levels. It is compatible with 2003-2006 Dodge Sprinter 2500 front, 2003-2006 Dodge Sprinter 3500 front, and 2003-2006 Dodge Sprinter 3500 rear applications.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive-molded friction material for consistent density and wear characteristics
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to speed up initial pad break-in
- Asbestos-free formulation
- Prepared for pad wear sensor use
- Pad shims included
Posi-Quiet Product Line Details
The Centric Posi-Quiet line focuses on controlled friction behavior, stable pad wear, and reduced brake noise. Centric uses an OE-style positive molding process to compress the friction material against the backing plate, helping maintain even density across the pad surface. For Sprinter owners searching for a front or rear brake pad set for a 2003-2006 Dodge Sprinter 2500 or 3500, part number 106.11360 provides a direct-fit option within this product family.
Detailed Description
Centric 106.11360 is a disc brake pad set with semi-metallic friction material, integrally molded attachment, and a 0.748-inch overall thickness. The pad design includes shims and a prepared-for-sensor configuration, with no wear sensor included and no mounting hardware listed. This construction supports even contact, stable pedal response, and quieter operation in daily driving and commercial use. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer break-in time after pad replacement
- Reduced braking consistency from worn front or rear pads
- Fitment concerns on 2003-2006 Dodge Sprinter 2500 and 3500 brake service jobs
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad abutment surfaces before installation. Clean the caliper bracket and contact points thoroughly, and confirm the vehicle is set up for the correct front or rear position before ordering. Because this pad set is prepared for a wear sensor but does not include one, reuse or replace the sensor as needed based on the vehicle configuration. For best results, follow the vehicle manufacturer’s bedding procedure after installation.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process and adds scorching to remove impurities and accelerate break-in. The friction material is asbestos free, and the pad design includes shims and precision backing plate finishing to support consistent performance and noise control.
Original: $37.30
-65%$37.30
$13.05Centric 106.11360 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Brake Pads for Sprinter
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.11360 is built for drivers who need consistent braking performance and controlled noise levels. It is compatible with 2003-2006 Dodge Sprinter 2500 front, 2003-2006 Dodge Sprinter 3500 front, and 2003-2006 Dodge Sprinter 3500 rear applications.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive-molded friction material for consistent density and wear characteristics
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to speed up initial pad break-in
- Asbestos-free formulation
- Prepared for pad wear sensor use
- Pad shims included
Posi-Quiet Product Line Details
The Centric Posi-Quiet line focuses on controlled friction behavior, stable pad wear, and reduced brake noise. Centric uses an OE-style positive molding process to compress the friction material against the backing plate, helping maintain even density across the pad surface. For Sprinter owners searching for a front or rear brake pad set for a 2003-2006 Dodge Sprinter 2500 or 3500, part number 106.11360 provides a direct-fit option within this product family.
Detailed Description
Centric 106.11360 is a disc brake pad set with semi-metallic friction material, integrally molded attachment, and a 0.748-inch overall thickness. The pad design includes shims and a prepared-for-sensor configuration, with no wear sensor included and no mounting hardware listed. This construction supports even contact, stable pedal response, and quieter operation in daily driving and commercial use. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer break-in time after pad replacement
- Reduced braking consistency from worn front or rear pads
- Fitment concerns on 2003-2006 Dodge Sprinter 2500 and 3500 brake service jobs
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad abutment surfaces before installation. Clean the caliper bracket and contact points thoroughly, and confirm the vehicle is set up for the correct front or rear position before ordering. Because this pad set is prepared for a wear sensor but does not include one, reuse or replace the sensor as needed based on the vehicle configuration. For best results, follow the vehicle manufacturer’s bedding procedure after installation.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process and adds scorching to remove impurities and accelerate break-in. The friction material is asbestos free, and the pad design includes shims and precision backing plate finishing to support consistent performance and noise control.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Brake Pads for Sprinter
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.11360 is built for drivers who need consistent braking performance and controlled noise levels. It is compatible with 2003-2006 Dodge Sprinter 2500 front, 2003-2006 Dodge Sprinter 3500 front, and 2003-2006 Dodge Sprinter 3500 rear applications.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive-molded friction material for consistent density and wear characteristics
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to speed up initial pad break-in
- Asbestos-free formulation
- Prepared for pad wear sensor use
- Pad shims included
Posi-Quiet Product Line Details
The Centric Posi-Quiet line focuses on controlled friction behavior, stable pad wear, and reduced brake noise. Centric uses an OE-style positive molding process to compress the friction material against the backing plate, helping maintain even density across the pad surface. For Sprinter owners searching for a front or rear brake pad set for a 2003-2006 Dodge Sprinter 2500 or 3500, part number 106.11360 provides a direct-fit option within this product family.
Detailed Description
Centric 106.11360 is a disc brake pad set with semi-metallic friction material, integrally molded attachment, and a 0.748-inch overall thickness. The pad design includes shims and a prepared-for-sensor configuration, with no wear sensor included and no mounting hardware listed. This construction supports even contact, stable pedal response, and quieter operation in daily driving and commercial use. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Longer break-in time after pad replacement
- Reduced braking consistency from worn front or rear pads
- Fitment concerns on 2003-2006 Dodge Sprinter 2500 and 3500 brake service jobs
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad abutment surfaces before installation. Clean the caliper bracket and contact points thoroughly, and confirm the vehicle is set up for the correct front or rear position before ordering. Because this pad set is prepared for a wear sensor but does not include one, reuse or replace the sensor as needed based on the vehicle configuration. For best results, follow the vehicle manufacturer’s bedding procedure after installation.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process and adds scorching to remove impurities and accelerate break-in. The friction material is asbestos free, and the pad design includes shims and precision backing plate finishing to support consistent performance and noise control.
