Centric 106.12590 Disc Brake Pad Set - Rear
Rear Brake Pads for Mazda, Ford, and Lincoln
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.12590 is built for rear brake service on select Mazda, Ford, and Lincoln vehicles. It combines semi-metallic friction with OE-style positive molding to help maintain consistent braking feel and even pad wear.
Compatible With 2007-2015 Mazda CX-9 rear, 2007-2012 Mazda CX-7 rear, 2007-2010 Ford Edge rear, and 2007-2010 Lincoln MKX rear. If you are replacing worn rear pads on a Mazda CX-9 or Mazda CX-7, this Centric 106.12590 set is matched to the listed applications.
Key Features
- Semi-metallic friction material for dependable rear brake performance
- Positive-molded friction material for consistent density across the pad
- Integrally molded friction attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce pad vibration noise
- Scorched friction surface to speed initial break-in
- Asbestos-free formulation
- Mounting hardware included where applicable
- Pad shims included
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on stable friction characteristics and reduced brake noise. The positive molding process compresses the friction material under high pressure, helping create uniform density for more even wear over the life of the pad. Centric also uses a scorching process to remove impurities from the friction surface and pre-burnish the pads, which helps shorten the break-in period after installation. Part number 106.12590 is a rear disc brake pad set for the listed Mazda CX-9, Mazda CX-7, Ford Edge, and Lincoln MKX applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Rear brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Reduced braking response from worn rear pads
- Brake noise related to backing plate or shim fitment
- Longer-than-expected pad break-in after replacement
Installation Notes
Verify rear axle fitment against the vehicle listing before installation. Inspect rotors, caliper hardware, and guide components for wear before fitting new pads. Clean the caliper bracket contact points and follow the vehicle manufacturer’s brake service procedure for bedding-in the pads after installation. Part number 106.12590 includes pad shims and mounting hardware where applicable.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process and application-specific friction formulations. The pads are asbestos free and built with features aimed at consistent wear, proper caliper fitment, and reduced noise.
Original: $33.11
-65%$33.11
$11.59Centric 106.12590 Disc Brake Pad Set - Rear
Rear Brake Pads for Mazda, Ford, and Lincoln
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.12590 is built for rear brake service on select Mazda, Ford, and Lincoln vehicles. It combines semi-metallic friction with OE-style positive molding to help maintain consistent braking feel and even pad wear.
Compatible With 2007-2015 Mazda CX-9 rear, 2007-2012 Mazda CX-7 rear, 2007-2010 Ford Edge rear, and 2007-2010 Lincoln MKX rear. If you are replacing worn rear pads on a Mazda CX-9 or Mazda CX-7, this Centric 106.12590 set is matched to the listed applications.
Key Features
- Semi-metallic friction material for dependable rear brake performance
- Positive-molded friction material for consistent density across the pad
- Integrally molded friction attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce pad vibration noise
- Scorched friction surface to speed initial break-in
- Asbestos-free formulation
- Mounting hardware included where applicable
- Pad shims included
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on stable friction characteristics and reduced brake noise. The positive molding process compresses the friction material under high pressure, helping create uniform density for more even wear over the life of the pad. Centric also uses a scorching process to remove impurities from the friction surface and pre-burnish the pads, which helps shorten the break-in period after installation. Part number 106.12590 is a rear disc brake pad set for the listed Mazda CX-9, Mazda CX-7, Ford Edge, and Lincoln MKX applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Rear brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Reduced braking response from worn rear pads
- Brake noise related to backing plate or shim fitment
- Longer-than-expected pad break-in after replacement
Installation Notes
Verify rear axle fitment against the vehicle listing before installation. Inspect rotors, caliper hardware, and guide components for wear before fitting new pads. Clean the caliper bracket contact points and follow the vehicle manufacturer’s brake service procedure for bedding-in the pads after installation. Part number 106.12590 includes pad shims and mounting hardware where applicable.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process and application-specific friction formulations. The pads are asbestos free and built with features aimed at consistent wear, proper caliper fitment, and reduced noise.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Pads for Mazda, Ford, and Lincoln
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.12590 is built for rear brake service on select Mazda, Ford, and Lincoln vehicles. It combines semi-metallic friction with OE-style positive molding to help maintain consistent braking feel and even pad wear.
Compatible With 2007-2015 Mazda CX-9 rear, 2007-2012 Mazda CX-7 rear, 2007-2010 Ford Edge rear, and 2007-2010 Lincoln MKX rear. If you are replacing worn rear pads on a Mazda CX-9 or Mazda CX-7, this Centric 106.12590 set is matched to the listed applications.
Key Features
- Semi-metallic friction material for dependable rear brake performance
- Positive-molded friction material for consistent density across the pad
- Integrally molded friction attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to reduce pad vibration noise
- Scorched friction surface to speed initial break-in
- Asbestos-free formulation
- Mounting hardware included where applicable
- Pad shims included
Product Details
Centric’s Posi-Quiet Extended Wear line focuses on stable friction characteristics and reduced brake noise. The positive molding process compresses the friction material under high pressure, helping create uniform density for more even wear over the life of the pad. Centric also uses a scorching process to remove impurities from the friction surface and pre-burnish the pads, which helps shorten the break-in period after installation. Part number 106.12590 is a rear disc brake pad set for the listed Mazda CX-9, Mazda CX-7, Ford Edge, and Lincoln MKX applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Rear brake squeal caused by pad vibration
- Uneven pad wear from inconsistent friction density
- Reduced braking response from worn rear pads
- Brake noise related to backing plate or shim fitment
- Longer-than-expected pad break-in after replacement
Installation Notes
Verify rear axle fitment against the vehicle listing before installation. Inspect rotors, caliper hardware, and guide components for wear before fitting new pads. Clean the caliper bracket contact points and follow the vehicle manufacturer’s brake service procedure for bedding-in the pads after installation. Part number 106.12590 includes pad shims and mounting hardware where applicable.
Quality Assurance
Centric manufactures Posi-Quiet pads using an OE-style positive molding process and application-specific friction formulations. The pads are asbestos free and built with features aimed at consistent wear, proper caliper fitment, and reduced noise.
