Centric 106.13030 Disc Brake Pad Set - Front
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.13030 is built for front brake service on select Toyota and Lexus trucks and SUVs. It combines OE-style positive molding with semi-metallic friction material to support consistent braking performance, even wear, and reduced noise.
This Centric Posi-Quiet brake pad line is focused on fit, quiet operation, and faster break-in. For drivers searching for front brake pads for a 2007-2021 Toyota Tundra, 2008-2022 Toyota Sequoia, 2013-2020 Toyota Land Cruiser, or 2008-2021 Lexus LX570, part number 106.13030 matches the application requirements listed below.
- Semi-metallic friction material for front disc brake service
- Positive-molded friction material for consistent density across the pad
- Precision-cut or shaved backing plates to support proper caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Asbestos-free formulation
- Prepared for pad wear sensor use; wear sensor included where applicable
- Mounting hardware and pad shims included
Product Details and Fitment
Centric engineered the Posi-Quiet line to address common brake complaints such as noise and vibration. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform density through the life of the pad. The result is a front brake pad set that supports steady pedal feel and predictable wear on Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570 applications. Part number 106.13030 also cross-references Wagner Brake SX1303 for the same application.
What This Brake Pad Set Helps Address
- Brake squeal from pad vibration
- Uneven pad wear caused by inconsistent friction density
- Initial brake noise during break-in
- Front brake service needs on Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570
- Wear sensor-related replacement requirements on equipped vehicles
Installation Notes and Tips
Verify front axle fitment by year, make, and model before installation. Inspect rotors, caliper hardware, and sensor connections during brake service, and follow the vehicle manufacturer’s bedding procedure after installation. The included shims and hardware are intended to support proper pad installation and noise control when used with the correct caliper setup.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching to help remove impurities and accelerate break-in. The pads are asbestos free and built with fitment-focused details such as shaped backing plates and attached shims to support consistent performance. Part number 106.13030 is a direct-fit front brake pad option for the listed Toyota and Lexus applications.
Original: $46.13
-65%$46.13
$16.15Centric 106.13030 Disc Brake Pad Set - Front
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.13030 is built for front brake service on select Toyota and Lexus trucks and SUVs. It combines OE-style positive molding with semi-metallic friction material to support consistent braking performance, even wear, and reduced noise.
This Centric Posi-Quiet brake pad line is focused on fit, quiet operation, and faster break-in. For drivers searching for front brake pads for a 2007-2021 Toyota Tundra, 2008-2022 Toyota Sequoia, 2013-2020 Toyota Land Cruiser, or 2008-2021 Lexus LX570, part number 106.13030 matches the application requirements listed below.
- Semi-metallic friction material for front disc brake service
- Positive-molded friction material for consistent density across the pad
- Precision-cut or shaved backing plates to support proper caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Asbestos-free formulation
- Prepared for pad wear sensor use; wear sensor included where applicable
- Mounting hardware and pad shims included
Product Details and Fitment
Centric engineered the Posi-Quiet line to address common brake complaints such as noise and vibration. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform density through the life of the pad. The result is a front brake pad set that supports steady pedal feel and predictable wear on Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570 applications. Part number 106.13030 also cross-references Wagner Brake SX1303 for the same application.
What This Brake Pad Set Helps Address
- Brake squeal from pad vibration
- Uneven pad wear caused by inconsistent friction density
- Initial brake noise during break-in
- Front brake service needs on Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570
- Wear sensor-related replacement requirements on equipped vehicles
Installation Notes and Tips
Verify front axle fitment by year, make, and model before installation. Inspect rotors, caliper hardware, and sensor connections during brake service, and follow the vehicle manufacturer’s bedding procedure after installation. The included shims and hardware are intended to support proper pad installation and noise control when used with the correct caliper setup.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching to help remove impurities and accelerate break-in. The pads are asbestos free and built with fitment-focused details such as shaped backing plates and attached shims to support consistent performance. Part number 106.13030 is a direct-fit front brake pad option for the listed Toyota and Lexus applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Front Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.13030 is built for front brake service on select Toyota and Lexus trucks and SUVs. It combines OE-style positive molding with semi-metallic friction material to support consistent braking performance, even wear, and reduced noise.
This Centric Posi-Quiet brake pad line is focused on fit, quiet operation, and faster break-in. For drivers searching for front brake pads for a 2007-2021 Toyota Tundra, 2008-2022 Toyota Sequoia, 2013-2020 Toyota Land Cruiser, or 2008-2021 Lexus LX570, part number 106.13030 matches the application requirements listed below.
- Semi-metallic friction material for front disc brake service
- Positive-molded friction material for consistent density across the pad
- Precision-cut or shaved backing plates to support proper caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed initial break-in
- Asbestos-free formulation
- Prepared for pad wear sensor use; wear sensor included where applicable
- Mounting hardware and pad shims included
Product Details and Fitment
Centric engineered the Posi-Quiet line to address common brake complaints such as noise and vibration. The positive molding process compresses the friction material under high pressure and bonds it to the backing plate, helping maintain uniform density through the life of the pad. The result is a front brake pad set that supports steady pedal feel and predictable wear on Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570 applications. Part number 106.13030 also cross-references Wagner Brake SX1303 for the same application.
What This Brake Pad Set Helps Address
- Brake squeal from pad vibration
- Uneven pad wear caused by inconsistent friction density
- Initial brake noise during break-in
- Front brake service needs on Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570
- Wear sensor-related replacement requirements on equipped vehicles
Installation Notes and Tips
Verify front axle fitment by year, make, and model before installation. Inspect rotors, caliper hardware, and sensor connections during brake service, and follow the vehicle manufacturer’s bedding procedure after installation. The included shims and hardware are intended to support proper pad installation and noise control when used with the correct caliper setup.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching to help remove impurities and accelerate break-in. The pads are asbestos free and built with fitment-focused details such as shaped backing plates and attached shims to support consistent performance. Part number 106.13030 is a direct-fit front brake pad option for the listed Toyota and Lexus applications.
