Centric 106.13040 Disc Brake Pad Set - Rear
Rear Brake Pads for Toyota and Lexus
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.13040 is built for rear brake service on select Toyota and Lexus trucks and SUVs, including Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570 applications. It uses a semi-metallic friction formula with OE-style positive molding to support consistent braking feel and even pad wear.
The Posi-Quiet line focuses on fit, noise control, and break-in performance. This rear brake pad set includes shims, mounting hardware, and a wear sensor, making it a practical choice for drivers looking for a direct replacement for rear disc brake maintenance on Toyota Tundra rear brake pads and Lexus LX570 rear brake pads applications.
Key Features
- Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set
- Part number 106.13040
- Semi-metallic friction material for rear disc brake service
- Positive-molded friction material for consistent density and wear
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to speed initial pad break-in
- Pad wear sensor included and prepared for wear sensor use
- Pad shims included
- Mounting hardware included
- Asbestos-free friction formulation
Product Details
Centric engineered the Posi-Quiet brake pad line using a positive molding process similar to OE supplier methods, which helps maintain uniform friction material density across the pad. That consistency supports even wear and stable performance over the life of the pad. The semi-metallic compound is paired with backing plate and shim details that help control noise and improve caliper fitment. Part number 106.13040 is a rear brake pad solution for 2007-2021 Toyota Tundra, 2008-2022 Toyota Sequoia, 2008-2011 and 2013-2021 Lexus LX570, and 2008-2011 and 2013-2020 Toyota Land Cruiser applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Rear brake squeal or vibration during stops
- Uneven pad wear from inconsistent friction density
- Delayed pad bedding after brake service
- Reduced braking confidence from worn rear pads
- Noise caused by pad movement in the caliper
Installation Notes and Tips
- Verify rear fitment by year, make, model, and position before installation.
- Inspect rotors, caliper hardware, and guide pins during brake service.
- Clean the caliper bracket and contact points before installing the new pads.
- Follow a proper bedding procedure after installation to help stabilize friction transfer.
- Confirm wear sensor routing and connector placement where equipped.
Quality Assurance
Centric Posi-Quiet pads are manufactured with OE-style positive molding and include design details aimed at reducing noise and vibration. The friction material is asbestos free, and the pad surface is scorched to help remove impurities and shorten the initial break-in period.
Original: $35.40
-65%$35.40
$12.39Centric 106.13040 Disc Brake Pad Set - Rear
Rear Brake Pads for Toyota and Lexus
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.13040 is built for rear brake service on select Toyota and Lexus trucks and SUVs, including Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570 applications. It uses a semi-metallic friction formula with OE-style positive molding to support consistent braking feel and even pad wear.
The Posi-Quiet line focuses on fit, noise control, and break-in performance. This rear brake pad set includes shims, mounting hardware, and a wear sensor, making it a practical choice for drivers looking for a direct replacement for rear disc brake maintenance on Toyota Tundra rear brake pads and Lexus LX570 rear brake pads applications.
Key Features
- Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set
- Part number 106.13040
- Semi-metallic friction material for rear disc brake service
- Positive-molded friction material for consistent density and wear
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to speed initial pad break-in
- Pad wear sensor included and prepared for wear sensor use
- Pad shims included
- Mounting hardware included
- Asbestos-free friction formulation
Product Details
Centric engineered the Posi-Quiet brake pad line using a positive molding process similar to OE supplier methods, which helps maintain uniform friction material density across the pad. That consistency supports even wear and stable performance over the life of the pad. The semi-metallic compound is paired with backing plate and shim details that help control noise and improve caliper fitment. Part number 106.13040 is a rear brake pad solution for 2007-2021 Toyota Tundra, 2008-2022 Toyota Sequoia, 2008-2011 and 2013-2021 Lexus LX570, and 2008-2011 and 2013-2020 Toyota Land Cruiser applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Rear brake squeal or vibration during stops
- Uneven pad wear from inconsistent friction density
- Delayed pad bedding after brake service
- Reduced braking confidence from worn rear pads
- Noise caused by pad movement in the caliper
Installation Notes and Tips
- Verify rear fitment by year, make, model, and position before installation.
- Inspect rotors, caliper hardware, and guide pins during brake service.
- Clean the caliper bracket and contact points before installing the new pads.
- Follow a proper bedding procedure after installation to help stabilize friction transfer.
- Confirm wear sensor routing and connector placement where equipped.
Quality Assurance
Centric Posi-Quiet pads are manufactured with OE-style positive molding and include design details aimed at reducing noise and vibration. The friction material is asbestos free, and the pad surface is scorched to help remove impurities and shorten the initial break-in period.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Pads for Toyota and Lexus
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.13040 is built for rear brake service on select Toyota and Lexus trucks and SUVs, including Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570 applications. It uses a semi-metallic friction formula with OE-style positive molding to support consistent braking feel and even pad wear.
The Posi-Quiet line focuses on fit, noise control, and break-in performance. This rear brake pad set includes shims, mounting hardware, and a wear sensor, making it a practical choice for drivers looking for a direct replacement for rear disc brake maintenance on Toyota Tundra rear brake pads and Lexus LX570 rear brake pads applications.
Key Features
- Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set
- Part number 106.13040
- Semi-metallic friction material for rear disc brake service
- Positive-molded friction material for consistent density and wear
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to speed initial pad break-in
- Pad wear sensor included and prepared for wear sensor use
- Pad shims included
- Mounting hardware included
- Asbestos-free friction formulation
Product Details
Centric engineered the Posi-Quiet brake pad line using a positive molding process similar to OE supplier methods, which helps maintain uniform friction material density across the pad. That consistency supports even wear and stable performance over the life of the pad. The semi-metallic compound is paired with backing plate and shim details that help control noise and improve caliper fitment. Part number 106.13040 is a rear brake pad solution for 2007-2021 Toyota Tundra, 2008-2022 Toyota Sequoia, 2008-2011 and 2013-2021 Lexus LX570, and 2008-2011 and 2013-2020 Toyota Land Cruiser applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Rear brake squeal or vibration during stops
- Uneven pad wear from inconsistent friction density
- Delayed pad bedding after brake service
- Reduced braking confidence from worn rear pads
- Noise caused by pad movement in the caliper
Installation Notes and Tips
- Verify rear fitment by year, make, model, and position before installation.
- Inspect rotors, caliper hardware, and guide pins during brake service.
- Clean the caliper bracket and contact points before installing the new pads.
- Follow a proper bedding procedure after installation to help stabilize friction transfer.
- Confirm wear sensor routing and connector placement where equipped.
Quality Assurance
Centric Posi-Quiet pads are manufactured with OE-style positive molding and include design details aimed at reducing noise and vibration. The friction material is asbestos free, and the pad surface is scorched to help remove impurities and shorten the initial break-in period.
