Centric 106.13230 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for severe-duty braking demands where consistent stopping performance and longer service life matter. Part number 106.13230 uses a semi-metallic friction formula with integrally molded attachment and hardware included for a complete brake service.
Compatible With applications that call for Centric 106.13230, these pads are part of the Centric Posi-Quiet Extended Wear line, a product family focused on extended wear and stable braking performance under heavier use. If you are servicing a Honda Civic, Toyota Camry, or similar daily-driver platform that needs dependable brake response, this pad set is engineered for that type of repair.
Key Features
- Semi-metallic friction material for strong braking response
- Extended wear design for severe-duty use
- Integrally molded friction material attachment
- Mounting hardware included
- Prepared for pad wear sensor applications
- Ultra-premium product grade
- Outer and inner pad dimensions: 109 mm height, 249.4 mm width, 30 mm thickness
Detailed Description
Centric 106.13230 disc brake pad sets are engineered for drivers who need controlled stopping performance and durable pad life in demanding conditions. The semi-metallic composition supports heat management and braking consistency, while the extended wear construction is suited to vehicles that see frequent stop-and-go driving, heavier loads, or repeated braking cycles. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For fitment-based searches, this part is commonly referenced when looking for brake pads for Honda Civic, Toyota Camry, and other vehicle-specific brake service applications that match Centric 106.13230. The pad shape, hardware kit number 117.86004, and sensor-prepared design help make it a practical choice for a direct brake pad replacement where the vehicle uses this configuration.
Common Brake Issues It Can Address
- Worn brake pads causing reduced stopping power
- Brake noise from pads that have reached service limits
- Uneven braking feel during repeated stops
- Brake fade under heavier-duty driving conditions
- Service intervals shortened by high-friction driving use
Installation Notes and Tips
Inspect rotors, calipers, and pad hardware before installation. Clean the caliper bracket contact points, verify pad fitment against the vehicle’s brake system, and confirm whether the application uses a wear sensor before reassembly. Because mounting hardware is included, replace worn hardware during the brake service and follow the vehicle manufacturer’s torque specifications.
Quality Assurance
Centric positions the Posi-Quiet Extended Wear line for extended wear and performance in severe-duty applications. Part number 106.13230 is an ultra-premium brake pad set built to meet the demands of routine replacement service where consistent braking characteristics are required.
Centric 106.13230 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for severe-duty braking demands where consistent stopping performance and longer service life matter. Part number 106.13230 uses a semi-metallic friction formula with integrally molded attachment and hardware included for a complete brake service.
Compatible With applications that call for Centric 106.13230, these pads are part of the Centric Posi-Quiet Extended Wear line, a product family focused on extended wear and stable braking performance under heavier use. If you are servicing a Honda Civic, Toyota Camry, or similar daily-driver platform that needs dependable brake response, this pad set is engineered for that type of repair.
Key Features
- Semi-metallic friction material for strong braking response
- Extended wear design for severe-duty use
- Integrally molded friction material attachment
- Mounting hardware included
- Prepared for pad wear sensor applications
- Ultra-premium product grade
- Outer and inner pad dimensions: 109 mm height, 249.4 mm width, 30 mm thickness
Detailed Description
Centric 106.13230 disc brake pad sets are engineered for drivers who need controlled stopping performance and durable pad life in demanding conditions. The semi-metallic composition supports heat management and braking consistency, while the extended wear construction is suited to vehicles that see frequent stop-and-go driving, heavier loads, or repeated braking cycles. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For fitment-based searches, this part is commonly referenced when looking for brake pads for Honda Civic, Toyota Camry, and other vehicle-specific brake service applications that match Centric 106.13230. The pad shape, hardware kit number 117.86004, and sensor-prepared design help make it a practical choice for a direct brake pad replacement where the vehicle uses this configuration.
Common Brake Issues It Can Address
- Worn brake pads causing reduced stopping power
- Brake noise from pads that have reached service limits
- Uneven braking feel during repeated stops
- Brake fade under heavier-duty driving conditions
- Service intervals shortened by high-friction driving use
Installation Notes and Tips
Inspect rotors, calipers, and pad hardware before installation. Clean the caliper bracket contact points, verify pad fitment against the vehicle’s brake system, and confirm whether the application uses a wear sensor before reassembly. Because mounting hardware is included, replace worn hardware during the brake service and follow the vehicle manufacturer’s torque specifications.
Quality Assurance
Centric positions the Posi-Quiet Extended Wear line for extended wear and performance in severe-duty applications. Part number 106.13230 is an ultra-premium brake pad set built to meet the demands of routine replacement service where consistent braking characteristics are required.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for severe-duty braking demands where consistent stopping performance and longer service life matter. Part number 106.13230 uses a semi-metallic friction formula with integrally molded attachment and hardware included for a complete brake service.
Compatible With applications that call for Centric 106.13230, these pads are part of the Centric Posi-Quiet Extended Wear line, a product family focused on extended wear and stable braking performance under heavier use. If you are servicing a Honda Civic, Toyota Camry, or similar daily-driver platform that needs dependable brake response, this pad set is engineered for that type of repair.
Key Features
- Semi-metallic friction material for strong braking response
- Extended wear design for severe-duty use
- Integrally molded friction material attachment
- Mounting hardware included
- Prepared for pad wear sensor applications
- Ultra-premium product grade
- Outer and inner pad dimensions: 109 mm height, 249.4 mm width, 30 mm thickness
Detailed Description
Centric 106.13230 disc brake pad sets are engineered for drivers who need controlled stopping performance and durable pad life in demanding conditions. The semi-metallic composition supports heat management and braking consistency, while the extended wear construction is suited to vehicles that see frequent stop-and-go driving, heavier loads, or repeated braking cycles. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For fitment-based searches, this part is commonly referenced when looking for brake pads for Honda Civic, Toyota Camry, and other vehicle-specific brake service applications that match Centric 106.13230. The pad shape, hardware kit number 117.86004, and sensor-prepared design help make it a practical choice for a direct brake pad replacement where the vehicle uses this configuration.
Common Brake Issues It Can Address
- Worn brake pads causing reduced stopping power
- Brake noise from pads that have reached service limits
- Uneven braking feel during repeated stops
- Brake fade under heavier-duty driving conditions
- Service intervals shortened by high-friction driving use
Installation Notes and Tips
Inspect rotors, calipers, and pad hardware before installation. Clean the caliper bracket contact points, verify pad fitment against the vehicle’s brake system, and confirm whether the application uses a wear sensor before reassembly. Because mounting hardware is included, replace worn hardware during the brake service and follow the vehicle manufacturer’s torque specifications.
Quality Assurance
Centric positions the Posi-Quiet Extended Wear line for extended wear and performance in severe-duty applications. Part number 106.13230 is an ultra-premium brake pad set built to meet the demands of routine replacement service where consistent braking characteristics are required.
