Centric 106.15651 Disc Brake Pad Set - Rear
Centric Posi-Quiet Rear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.15651 is built for rear brake service on select Nissan NV1500, NV2500, NV3500, and TITAN XD applications. It uses an OE-style positive molding process to promote consistent friction density, even wear, and stable braking performance.
The Posi-Quiet line focuses on fit, noise control, and break-in consistency. For Nissan NV1500 rear brake pads and Nissan TITAN XD rear brake pads, this set includes the details that matter at the caliper: precision-cut or shaved backing plates, mechanically attached shims, and a scorching process that helps remove impurities and speed initial bedding.
Key Features
- Semi-metallic friction material for rear disc brake service
- Positive molded construction for consistent pad density
- Precision-cut or shaved backing plates for proper caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to accelerate break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
Centric 106.15651 is a rear disc brake pad set from the Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets line. The product line is engineered around OE-style manufacturing methods, with friction material compressed under high pressure and bonded to the backing plate for uniform performance across the pad surface. That construction supports predictable pedal feel and consistent wear on daily-driven trucks and vans.
This part cross-references Wagner Brake SX1565A for the same application. It is a direct-fit rear brake pad option for 2012-2021 Nissan NV1500, 2012-2021 Nissan NV2500, 2012-2021 Nissan NV3500, 2017-2021 Nissan TITAN XD, and 2016 Nissan TITAN XD rear brake service from 09/16.
Common Brake Issues It Can Address
- Brake noise from pad vibration
- Uneven pad wear caused by inconsistent friction density
- Longer initial bedding time after brake service
- Rear brake fade or reduced stopping consistency from worn pads
- Fitment concerns at the caliper from worn or poorly matched pads
Installation Notes and Tips
Verify rear axle fitment before installation and confirm the vehicle uses the correct wear sensor setup. Inspect rotors, caliper hardware, and guide pins during service, and replace any worn components that could affect pad movement or noise. Follow the vehicle manufacturer’s bedding procedure after installation to help the pads seat properly.
Quality Assurance
Centric uses an OE-style positive molding process and adds scorching, shims, and precision backing plate preparation to improve consistency and reduce noise concerns. The friction material is asbestos free, and the pad set includes the hardware specified for the application where applicable.
Centric 106.15651 Disc Brake Pad Set - Rear
Centric Posi-Quiet Rear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.15651 is built for rear brake service on select Nissan NV1500, NV2500, NV3500, and TITAN XD applications. It uses an OE-style positive molding process to promote consistent friction density, even wear, and stable braking performance.
The Posi-Quiet line focuses on fit, noise control, and break-in consistency. For Nissan NV1500 rear brake pads and Nissan TITAN XD rear brake pads, this set includes the details that matter at the caliper: precision-cut or shaved backing plates, mechanically attached shims, and a scorching process that helps remove impurities and speed initial bedding.
Key Features
- Semi-metallic friction material for rear disc brake service
- Positive molded construction for consistent pad density
- Precision-cut or shaved backing plates for proper caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to accelerate break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
Centric 106.15651 is a rear disc brake pad set from the Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets line. The product line is engineered around OE-style manufacturing methods, with friction material compressed under high pressure and bonded to the backing plate for uniform performance across the pad surface. That construction supports predictable pedal feel and consistent wear on daily-driven trucks and vans.
This part cross-references Wagner Brake SX1565A for the same application. It is a direct-fit rear brake pad option for 2012-2021 Nissan NV1500, 2012-2021 Nissan NV2500, 2012-2021 Nissan NV3500, 2017-2021 Nissan TITAN XD, and 2016 Nissan TITAN XD rear brake service from 09/16.
Common Brake Issues It Can Address
- Brake noise from pad vibration
- Uneven pad wear caused by inconsistent friction density
- Longer initial bedding time after brake service
- Rear brake fade or reduced stopping consistency from worn pads
- Fitment concerns at the caliper from worn or poorly matched pads
Installation Notes and Tips
Verify rear axle fitment before installation and confirm the vehicle uses the correct wear sensor setup. Inspect rotors, caliper hardware, and guide pins during service, and replace any worn components that could affect pad movement or noise. Follow the vehicle manufacturer’s bedding procedure after installation to help the pads seat properly.
Quality Assurance
Centric uses an OE-style positive molding process and adds scorching, shims, and precision backing plate preparation to improve consistency and reduce noise concerns. The friction material is asbestos free, and the pad set includes the hardware specified for the application where applicable.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Rear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Set 106.15651 is built for rear brake service on select Nissan NV1500, NV2500, NV3500, and TITAN XD applications. It uses an OE-style positive molding process to promote consistent friction density, even wear, and stable braking performance.
The Posi-Quiet line focuses on fit, noise control, and break-in consistency. For Nissan NV1500 rear brake pads and Nissan TITAN XD rear brake pads, this set includes the details that matter at the caliper: precision-cut or shaved backing plates, mechanically attached shims, and a scorching process that helps remove impurities and speed initial bedding.
Key Features
- Semi-metallic friction material for rear disc brake service
- Positive molded construction for consistent pad density
- Precision-cut or shaved backing plates for proper caliper fitment
- Mechanically attached shims to reduce vibration-related noise
- Scorched friction surface to accelerate break-in
- Pad wear sensor included and prepared for wear sensor use
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
Centric 106.15651 is a rear disc brake pad set from the Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets line. The product line is engineered around OE-style manufacturing methods, with friction material compressed under high pressure and bonded to the backing plate for uniform performance across the pad surface. That construction supports predictable pedal feel and consistent wear on daily-driven trucks and vans.
This part cross-references Wagner Brake SX1565A for the same application. It is a direct-fit rear brake pad option for 2012-2021 Nissan NV1500, 2012-2021 Nissan NV2500, 2012-2021 Nissan NV3500, 2017-2021 Nissan TITAN XD, and 2016 Nissan TITAN XD rear brake service from 09/16.
Common Brake Issues It Can Address
- Brake noise from pad vibration
- Uneven pad wear caused by inconsistent friction density
- Longer initial bedding time after brake service
- Rear brake fade or reduced stopping consistency from worn pads
- Fitment concerns at the caliper from worn or poorly matched pads
Installation Notes and Tips
Verify rear axle fitment before installation and confirm the vehicle uses the correct wear sensor setup. Inspect rotors, caliper hardware, and guide pins during service, and replace any worn components that could affect pad movement or noise. Follow the vehicle manufacturer’s bedding procedure after installation to help the pads seat properly.
Quality Assurance
Centric uses an OE-style positive molding process and adds scorching, shims, and precision backing plate preparation to improve consistency and reduce noise concerns. The friction material is asbestos free, and the pad set includes the hardware specified for the application where applicable.
