Centric 106.16820 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking feel, even wear, and reduced noise. Part number 106.16820 uses an OE-style positive molding process and includes features that support stable caliper fitment and smoother operation.
Compatible With select vehicle applications that call for Centric 106.16820, this brake pad set is part of the Posi-Quiet line, which focuses on fit, friction consistency, and noise control for everyday driving and service replacement.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for uniform friction density
- Integrally molded friction material attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Pad wear sensor included and prepared for pad wear sensor use
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
The Centric Posi-Quiet Extended Wear line is engineered around OE-style manufacturing methods. By compressing the friction material under high pressure, Centric helps maintain consistent density across the pad surface, which supports even wear and predictable performance over the service life of the brake pads. The 106.16820 pad set also uses shims and carefully finished backing plates to address common brake complaints such as squeal and vibration. A scorching process is applied to help clear impurities from the friction material and reduce the initial break-in period. This part number, 106.16820, is a practical choice for drivers and technicians looking for a direct replacement brake pad set with noise-control features built in.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake squeal during light or moderate braking
- Brake vibration caused by pad movement in the caliper
- Uneven pad wear from inconsistent friction density
- Longer initial bedding-in after pad replacement
- Fitment issues related to backing plate finish and shim design
Installation Notes and Tips
Verify vehicle-specific fitment before ordering, especially for applications listed under Centric 106.16820. Inspect calipers, rotors, and hardware surfaces before installation, and replace worn components as needed to support proper pad operation. Follow the vehicle manufacturer’s brake service procedure and complete a proper bedding-in process after installation.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching, precision backing plate finishing, and attached shims to support consistent performance and noise control. The friction material is asbestos free, and the pad set includes the features listed for this part number.
Original: $86.65
-65%$86.65
$30.33Centric 106.16820 Disc Brake Pad Set - Front or Rear
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking feel, even wear, and reduced noise. Part number 106.16820 uses an OE-style positive molding process and includes features that support stable caliper fitment and smoother operation.
Compatible With select vehicle applications that call for Centric 106.16820, this brake pad set is part of the Posi-Quiet line, which focuses on fit, friction consistency, and noise control for everyday driving and service replacement.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for uniform friction density
- Integrally molded friction material attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Pad wear sensor included and prepared for pad wear sensor use
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
The Centric Posi-Quiet Extended Wear line is engineered around OE-style manufacturing methods. By compressing the friction material under high pressure, Centric helps maintain consistent density across the pad surface, which supports even wear and predictable performance over the service life of the brake pads. The 106.16820 pad set also uses shims and carefully finished backing plates to address common brake complaints such as squeal and vibration. A scorching process is applied to help clear impurities from the friction material and reduce the initial break-in period. This part number, 106.16820, is a practical choice for drivers and technicians looking for a direct replacement brake pad set with noise-control features built in.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake squeal during light or moderate braking
- Brake vibration caused by pad movement in the caliper
- Uneven pad wear from inconsistent friction density
- Longer initial bedding-in after pad replacement
- Fitment issues related to backing plate finish and shim design
Installation Notes and Tips
Verify vehicle-specific fitment before ordering, especially for applications listed under Centric 106.16820. Inspect calipers, rotors, and hardware surfaces before installation, and replace worn components as needed to support proper pad operation. Follow the vehicle manufacturer’s brake service procedure and complete a proper bedding-in process after installation.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching, precision backing plate finishing, and attached shims to support consistent performance and noise control. The friction material is asbestos free, and the pad set includes the features listed for this part number.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Posi-Quiet Extended Wear Brake Pads
Centric Posi-Quiet Extended Wear Semi-Metallic Disc Brake Pad Sets are built for consistent braking feel, even wear, and reduced noise. Part number 106.16820 uses an OE-style positive molding process and includes features that support stable caliper fitment and smoother operation.
Compatible With select vehicle applications that call for Centric 106.16820, this brake pad set is part of the Posi-Quiet line, which focuses on fit, friction consistency, and noise control for everyday driving and service replacement.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Positive molded construction for uniform friction density
- Integrally molded friction material attachment
- Precision-cut or shaved backing plates for caliper fitment
- Mechanically attached shims to help reduce vibration-related noise
- Scorched friction surface to remove impurities and speed break-in
- Pad wear sensor included and prepared for pad wear sensor use
- Mounting hardware included where applicable
- Asbestos-free friction formulation
Product Details
The Centric Posi-Quiet Extended Wear line is engineered around OE-style manufacturing methods. By compressing the friction material under high pressure, Centric helps maintain consistent density across the pad surface, which supports even wear and predictable performance over the service life of the brake pads. The 106.16820 pad set also uses shims and carefully finished backing plates to address common brake complaints such as squeal and vibration. A scorching process is applied to help clear impurities from the friction material and reduce the initial break-in period. This part number, 106.16820, is a practical choice for drivers and technicians looking for a direct replacement brake pad set with noise-control features built in.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake squeal during light or moderate braking
- Brake vibration caused by pad movement in the caliper
- Uneven pad wear from inconsistent friction density
- Longer initial bedding-in after pad replacement
- Fitment issues related to backing plate finish and shim design
Installation Notes and Tips
Verify vehicle-specific fitment before ordering, especially for applications listed under Centric 106.16820. Inspect calipers, rotors, and hardware surfaces before installation, and replace worn components as needed to support proper pad operation. Follow the vehicle manufacturer’s brake service procedure and complete a proper bedding-in process after installation.
Quality Assurance
Centric manufactures the Posi-Quiet line using an OE-style positive molding process and adds scorching, precision backing plate finishing, and attached shims to support consistent performance and noise control. The friction material is asbestos free, and the pad set includes the features listed for this part number.
