Centric 120.37007 Disc Brake Rotor - Rear
Centric Premium Rear Brake Rotor for Porsche
The Centric Premium Disc Brake Rotor, part number 120.37007, is a rear rotor built for select Porsche applications from 1977-1988. It combines a coated hat and edge with a smooth, vented design to support consistent braking performance and corrosion resistance.
Centric Premium Disc Brake Rotors are part of the Centric Premium Disc Brake Rotors line, focused on OE-style replacement fitment with corrosion-resistant finishes and application-specific sizing. This rotor is a direct match for rear brake service on Porsche 924, Porsche 928, and Porsche 944 models listed below.
- Fits 1977-1978 Porsche 924, rear, with Sport Package
- Fits 1979-1982 Porsche 924, rear
- Fits 1987-1988 Porsche 924, rear
- Fits 1978-1985 Porsche 928, rear
- Fits 1986 Porsche 928, rear, to chassis # 92GS860999
- Fits 1983-1986 Porsche 944, rear
Key Features
- Part number 120.37007
- Rear disc brake rotor for Porsche applications
- Coated hat and edge for corrosion resistance
- Resin-modified coating tested to withstand 120 hours in salt chamber testing
- Vented rotor design with straight vanes
- Smooth surface type
- Outside diameter: 11.378 in. / 289.000 mm
- Nominal thickness: 0.787 in. / 20.000 mm
- Discard thickness: 0.732 in. / 18.600 mm
- 5-lug pattern with 5 mounting bolt holes
Detailed Description
Built for rear brake service, this Centric Premium rotor measures 11.378 inches in outside diameter with a 20.000 mm nominal thickness and a 18.600 mm discard thickness. The vented construction and straight vane layout support heat management during repeated stops, while the coated hat and edge help reduce corrosion on exposed surfaces. With a smooth friction surface and OE-style dimensions, part number 120.37007 is a practical replacement for Porsche 924, 928, and 944 rear brake maintenance.
Use this rotor when servicing rear brake systems on 1977-1978 Porsche 924 with Sport Package, 1979-1982 Porsche 924, 1987-1988 Porsche 924, 1978-1985 Porsche 928, 1986 Porsche 928 to chassis # 92GS860999, and 1983-1986 Porsche 944. Search terms such as Porsche 944 rear brake rotor 120.37007 and Porsche 928 rear disc brake rotor are directly aligned with this application.
What It Helps Address
- Rear brake pulsation caused by worn rotor surfaces
- Corrosion on the hat and outer edge of the rotor
- Brake noise related to uneven rotor wear
- Reduced braking consistency from rotor thickness loss
- Service replacement needs on Porsche 924, 928, and 944 rear brakes
Installation Notes and Tips
Confirm rotor dimensions, hub fitment, and chassis breakpoints before installation, especially on the 1986 Porsche 928 application. Inspect pads, calipers, and wheel bearings during brake service, and clean the hub mounting surface so the rotor seats evenly. Verify the 5-lug bolt pattern and center hole diameter match the vehicle before assembly.
Quality Assurance
Centric Premium rotors use a resin-modified protective coating on the hat and edge for corrosion resistance, with salt chamber testing cited at 120 hours. Part number 120.37007 is built to the listed specifications for the confirmed Porsche rear applications above.
Centric 120.37007 Disc Brake Rotor - Rear
Centric Premium Rear Brake Rotor for Porsche
The Centric Premium Disc Brake Rotor, part number 120.37007, is a rear rotor built for select Porsche applications from 1977-1988. It combines a coated hat and edge with a smooth, vented design to support consistent braking performance and corrosion resistance.
Centric Premium Disc Brake Rotors are part of the Centric Premium Disc Brake Rotors line, focused on OE-style replacement fitment with corrosion-resistant finishes and application-specific sizing. This rotor is a direct match for rear brake service on Porsche 924, Porsche 928, and Porsche 944 models listed below.
- Fits 1977-1978 Porsche 924, rear, with Sport Package
- Fits 1979-1982 Porsche 924, rear
- Fits 1987-1988 Porsche 924, rear
- Fits 1978-1985 Porsche 928, rear
- Fits 1986 Porsche 928, rear, to chassis # 92GS860999
- Fits 1983-1986 Porsche 944, rear
Key Features
- Part number 120.37007
- Rear disc brake rotor for Porsche applications
- Coated hat and edge for corrosion resistance
- Resin-modified coating tested to withstand 120 hours in salt chamber testing
- Vented rotor design with straight vanes
- Smooth surface type
- Outside diameter: 11.378 in. / 289.000 mm
- Nominal thickness: 0.787 in. / 20.000 mm
- Discard thickness: 0.732 in. / 18.600 mm
- 5-lug pattern with 5 mounting bolt holes
Detailed Description
Built for rear brake service, this Centric Premium rotor measures 11.378 inches in outside diameter with a 20.000 mm nominal thickness and a 18.600 mm discard thickness. The vented construction and straight vane layout support heat management during repeated stops, while the coated hat and edge help reduce corrosion on exposed surfaces. With a smooth friction surface and OE-style dimensions, part number 120.37007 is a practical replacement for Porsche 924, 928, and 944 rear brake maintenance.
Use this rotor when servicing rear brake systems on 1977-1978 Porsche 924 with Sport Package, 1979-1982 Porsche 924, 1987-1988 Porsche 924, 1978-1985 Porsche 928, 1986 Porsche 928 to chassis # 92GS860999, and 1983-1986 Porsche 944. Search terms such as Porsche 944 rear brake rotor 120.37007 and Porsche 928 rear disc brake rotor are directly aligned with this application.
What It Helps Address
- Rear brake pulsation caused by worn rotor surfaces
- Corrosion on the hat and outer edge of the rotor
- Brake noise related to uneven rotor wear
- Reduced braking consistency from rotor thickness loss
- Service replacement needs on Porsche 924, 928, and 944 rear brakes
Installation Notes and Tips
Confirm rotor dimensions, hub fitment, and chassis breakpoints before installation, especially on the 1986 Porsche 928 application. Inspect pads, calipers, and wheel bearings during brake service, and clean the hub mounting surface so the rotor seats evenly. Verify the 5-lug bolt pattern and center hole diameter match the vehicle before assembly.
Quality Assurance
Centric Premium rotors use a resin-modified protective coating on the hat and edge for corrosion resistance, with salt chamber testing cited at 120 hours. Part number 120.37007 is built to the listed specifications for the confirmed Porsche rear applications above.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium Rear Brake Rotor for Porsche
The Centric Premium Disc Brake Rotor, part number 120.37007, is a rear rotor built for select Porsche applications from 1977-1988. It combines a coated hat and edge with a smooth, vented design to support consistent braking performance and corrosion resistance.
Centric Premium Disc Brake Rotors are part of the Centric Premium Disc Brake Rotors line, focused on OE-style replacement fitment with corrosion-resistant finishes and application-specific sizing. This rotor is a direct match for rear brake service on Porsche 924, Porsche 928, and Porsche 944 models listed below.
- Fits 1977-1978 Porsche 924, rear, with Sport Package
- Fits 1979-1982 Porsche 924, rear
- Fits 1987-1988 Porsche 924, rear
- Fits 1978-1985 Porsche 928, rear
- Fits 1986 Porsche 928, rear, to chassis # 92GS860999
- Fits 1983-1986 Porsche 944, rear
Key Features
- Part number 120.37007
- Rear disc brake rotor for Porsche applications
- Coated hat and edge for corrosion resistance
- Resin-modified coating tested to withstand 120 hours in salt chamber testing
- Vented rotor design with straight vanes
- Smooth surface type
- Outside diameter: 11.378 in. / 289.000 mm
- Nominal thickness: 0.787 in. / 20.000 mm
- Discard thickness: 0.732 in. / 18.600 mm
- 5-lug pattern with 5 mounting bolt holes
Detailed Description
Built for rear brake service, this Centric Premium rotor measures 11.378 inches in outside diameter with a 20.000 mm nominal thickness and a 18.600 mm discard thickness. The vented construction and straight vane layout support heat management during repeated stops, while the coated hat and edge help reduce corrosion on exposed surfaces. With a smooth friction surface and OE-style dimensions, part number 120.37007 is a practical replacement for Porsche 924, 928, and 944 rear brake maintenance.
Use this rotor when servicing rear brake systems on 1977-1978 Porsche 924 with Sport Package, 1979-1982 Porsche 924, 1987-1988 Porsche 924, 1978-1985 Porsche 928, 1986 Porsche 928 to chassis # 92GS860999, and 1983-1986 Porsche 944. Search terms such as Porsche 944 rear brake rotor 120.37007 and Porsche 928 rear disc brake rotor are directly aligned with this application.
What It Helps Address
- Rear brake pulsation caused by worn rotor surfaces
- Corrosion on the hat and outer edge of the rotor
- Brake noise related to uneven rotor wear
- Reduced braking consistency from rotor thickness loss
- Service replacement needs on Porsche 924, 928, and 944 rear brakes
Installation Notes and Tips
Confirm rotor dimensions, hub fitment, and chassis breakpoints before installation, especially on the 1986 Porsche 928 application. Inspect pads, calipers, and wheel bearings during brake service, and clean the hub mounting surface so the rotor seats evenly. Verify the 5-lug bolt pattern and center hole diameter match the vehicle before assembly.
Quality Assurance
Centric Premium rotors use a resin-modified protective coating on the hat and edge for corrosion resistance, with salt chamber testing cited at 120 hours. Part number 120.37007 is built to the listed specifications for the confirmed Porsche rear applications above.
