Centric 120.37026 Disc Brake Rotor - Rear
Centric Premium Rear Rotor for Porsche 944
The Centric Premium Disc Brake Rotor, part number 120.37026, is a rear vented rotor built for 1987-1989 Porsche 944 applications. It combines a smooth braking surface with a coated hat and Centric’s electrocoated finish for corrosion resistance in everyday driving conditions.
Centric Premium Disc Brake Rotors are engineered for drivers who want a direct-fit replacement rotor with attention to corrosion protection. For Porsche 944 rear brake service, this rotor supports consistent braking performance while helping resist rust on exposed surfaces.
Key Features
- Part number 120.37026
- Fits 1987-1989 Porsche 944, rear
- Vented rotor design with straight vanes
- Smooth surface type for brake pad contact
- Electrocoated finish for long-lasting corrosion protection
- Coated hat finish
- 5-bolt hole configuration
- Outside diameter: 288 mm (11.339 in.)
- Nominal thickness: 20 mm (0.787 in.)
- Discard thickness: 18.6 mm (0.732 in.)
Detailed Description
Centric Premium Disc Brake Rotors are part of the Centric Premium Disc Brake Rotors line, which focuses on replacement rotors with corrosion-resistant finishing and OE-style fitment details. This rotor uses an electrocoating finish rather than a basic phosphate coating, giving the exposed metal surfaces stronger protection against rust after installation. The rear rotor design for the Porsche 944 includes a vented construction, straight vane layout, 103 mm center hole diameter, and 130 mm bolt circle to match the specified application.
Use part number 120.37026 when searching for a rear brake rotor for Porsche 944 models from 1987 through 1989. This part also cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Rotor Can Address
- Brake pulsation caused by rotor wear or thickness variation
- Rust buildup on the rotor hat or exposed braking surfaces
- Reduced braking consistency from worn rear rotors
- Noise from uneven rotor surfaces during pad contact
- Service replacement for a damaged or out-of-spec rear rotor
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and hub center diameter before installation on your Porsche 944 rear brake system. Clean the rotor and hub mating surfaces before mounting, and inspect brake pads, caliper condition, and wheel bearings during service. Confirm that the rotor thickness remains above discard specifications after installation and bedding.
Quality Assurance
Centric premium rotors use an electrocoated finish designed to resist corrosion far beyond basic storage coatings. The finish is engineered to withstand extended salt-water exposure testing, helping preserve the rotor’s appearance and surface protection after installation.
Centric 120.37026 Disc Brake Rotor - Rear
Centric Premium Rear Rotor for Porsche 944
The Centric Premium Disc Brake Rotor, part number 120.37026, is a rear vented rotor built for 1987-1989 Porsche 944 applications. It combines a smooth braking surface with a coated hat and Centric’s electrocoated finish for corrosion resistance in everyday driving conditions.
Centric Premium Disc Brake Rotors are engineered for drivers who want a direct-fit replacement rotor with attention to corrosion protection. For Porsche 944 rear brake service, this rotor supports consistent braking performance while helping resist rust on exposed surfaces.
Key Features
- Part number 120.37026
- Fits 1987-1989 Porsche 944, rear
- Vented rotor design with straight vanes
- Smooth surface type for brake pad contact
- Electrocoated finish for long-lasting corrosion protection
- Coated hat finish
- 5-bolt hole configuration
- Outside diameter: 288 mm (11.339 in.)
- Nominal thickness: 20 mm (0.787 in.)
- Discard thickness: 18.6 mm (0.732 in.)
Detailed Description
Centric Premium Disc Brake Rotors are part of the Centric Premium Disc Brake Rotors line, which focuses on replacement rotors with corrosion-resistant finishing and OE-style fitment details. This rotor uses an electrocoating finish rather than a basic phosphate coating, giving the exposed metal surfaces stronger protection against rust after installation. The rear rotor design for the Porsche 944 includes a vented construction, straight vane layout, 103 mm center hole diameter, and 130 mm bolt circle to match the specified application.
Use part number 120.37026 when searching for a rear brake rotor for Porsche 944 models from 1987 through 1989. This part also cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Rotor Can Address
- Brake pulsation caused by rotor wear or thickness variation
- Rust buildup on the rotor hat or exposed braking surfaces
- Reduced braking consistency from worn rear rotors
- Noise from uneven rotor surfaces during pad contact
- Service replacement for a damaged or out-of-spec rear rotor
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and hub center diameter before installation on your Porsche 944 rear brake system. Clean the rotor and hub mating surfaces before mounting, and inspect brake pads, caliper condition, and wheel bearings during service. Confirm that the rotor thickness remains above discard specifications after installation and bedding.
Quality Assurance
Centric premium rotors use an electrocoated finish designed to resist corrosion far beyond basic storage coatings. The finish is engineered to withstand extended salt-water exposure testing, helping preserve the rotor’s appearance and surface protection after installation.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium Rear Rotor for Porsche 944
The Centric Premium Disc Brake Rotor, part number 120.37026, is a rear vented rotor built for 1987-1989 Porsche 944 applications. It combines a smooth braking surface with a coated hat and Centric’s electrocoated finish for corrosion resistance in everyday driving conditions.
Centric Premium Disc Brake Rotors are engineered for drivers who want a direct-fit replacement rotor with attention to corrosion protection. For Porsche 944 rear brake service, this rotor supports consistent braking performance while helping resist rust on exposed surfaces.
Key Features
- Part number 120.37026
- Fits 1987-1989 Porsche 944, rear
- Vented rotor design with straight vanes
- Smooth surface type for brake pad contact
- Electrocoated finish for long-lasting corrosion protection
- Coated hat finish
- 5-bolt hole configuration
- Outside diameter: 288 mm (11.339 in.)
- Nominal thickness: 20 mm (0.787 in.)
- Discard thickness: 18.6 mm (0.732 in.)
Detailed Description
Centric Premium Disc Brake Rotors are part of the Centric Premium Disc Brake Rotors line, which focuses on replacement rotors with corrosion-resistant finishing and OE-style fitment details. This rotor uses an electrocoating finish rather than a basic phosphate coating, giving the exposed metal surfaces stronger protection against rust after installation. The rear rotor design for the Porsche 944 includes a vented construction, straight vane layout, 103 mm center hole diameter, and 130 mm bolt circle to match the specified application.
Use part number 120.37026 when searching for a rear brake rotor for Porsche 944 models from 1987 through 1989. This part also cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Rotor Can Address
- Brake pulsation caused by rotor wear or thickness variation
- Rust buildup on the rotor hat or exposed braking surfaces
- Reduced braking consistency from worn rear rotors
- Noise from uneven rotor surfaces during pad contact
- Service replacement for a damaged or out-of-spec rear rotor
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and hub center diameter before installation on your Porsche 944 rear brake system. Clean the rotor and hub mating surfaces before mounting, and inspect brake pads, caliper condition, and wheel bearings during service. Confirm that the rotor thickness remains above discard specifications after installation and bedding.
Quality Assurance
Centric premium rotors use an electrocoated finish designed to resist corrosion far beyond basic storage coatings. The finish is engineered to withstand extended salt-water exposure testing, helping preserve the rotor’s appearance and surface protection after installation.
