Centric 120.46050 Disc Brake Rotor - Rear
Centric Premium Rear Disc Brake Rotor
Centric Premium Disc Brake Rotors are built for consistent braking performance and corrosion resistance in everyday driving conditions. This Centric 120.46050 rear disc brake rotor uses an electrocoated finish on the hat and friction surfaces to help protect against rust after installation.
Compatible With 1997-2004 Mitsubishi Diamante rear applications, this rotor is a direct-fit replacement for drivers servicing the rear brake system on the Mitsubishi Diamante. The Centric Premium Disc Brake Rotors line focuses on OE-style fit and finish with surface protection that outlasts basic phosphate coatings.
Key Features
- Centric Premium Disc Brake Rotors part number 120.46050
- Rear solid disc brake rotor for Mitsubishi Diamante applications
- Electrocoated finish for long-lasting corrosion protection
- Coated hat finish helps resist rust on exposed surfaces
- Smooth surface type for brake pad contact
- 5-lug bolt pattern with 114.3 mm mounting bolt circle diameter
- Outside diameter: 257.7 mm (10.146 in.)
- Nominal thickness: 10.0 mm (0.394 in.)
- Discard thickness: 8.4 mm (0.331 in.)
- Center hole diameter: 90.2 mm
Detailed Description
The Centric Premium Disc Brake Rotors 120.46050 is engineered for rear brake service on the 1997-2004 Mitsubishi Diamante. It features a solid rotor design, smooth friction surface, and coated finish details that help maintain appearance and resist corrosion in wet, salty, and high-moisture environments. The electrocoating process is a key part of the Centric Premium Disc Brake Rotors line, providing more durable protection than basic phosphate finishes that can lose effectiveness after installation.
This rotor measures 257.7 mm in outside diameter, 56.8 mm in overall height, and 90.2 mm at the center hole. It also uses a floating / DIH mounting type and includes one miscellaneous hole as listed in the product data. For shoppers searching for a rear brake rotor for Mitsubishi Diamante, Centric 120.46050 offers the fitment and finish details needed for a straightforward brake repair.
This part cross-references Febi-Bilstein 31225 for the same application.
What It Helps Address
- Brake rotor rust on exposed surfaces
- Rear brake vibration caused by worn rotor surfaces
- Reduced braking consistency from rotor wear
- Brake service needs on a Mitsubishi Diamante rear axle
- Replacement of a rotor that has reached discard thickness
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat and runs true. Inspect rear pads, caliper hardware, and parking brake components during service, and measure rotor thickness after installation to confirm it remains above discard limits.
Fits 1997-2004 Mitsubishi Diamante, rear.
Quality Assurance
Centric Premium Disc Brake Rotors are manufactured with an electrocoated corrosion-protection finish intended to withstand extended salt-water exposure without rusting. The coated hat and protected surfaces support long-term durability in brake service applications.
Original: $53.17
-65%$53.17
$18.61Centric 120.46050 Disc Brake Rotor - Rear
Centric Premium Rear Disc Brake Rotor
Centric Premium Disc Brake Rotors are built for consistent braking performance and corrosion resistance in everyday driving conditions. This Centric 120.46050 rear disc brake rotor uses an electrocoated finish on the hat and friction surfaces to help protect against rust after installation.
Compatible With 1997-2004 Mitsubishi Diamante rear applications, this rotor is a direct-fit replacement for drivers servicing the rear brake system on the Mitsubishi Diamante. The Centric Premium Disc Brake Rotors line focuses on OE-style fit and finish with surface protection that outlasts basic phosphate coatings.
Key Features
- Centric Premium Disc Brake Rotors part number 120.46050
- Rear solid disc brake rotor for Mitsubishi Diamante applications
- Electrocoated finish for long-lasting corrosion protection
- Coated hat finish helps resist rust on exposed surfaces
- Smooth surface type for brake pad contact
- 5-lug bolt pattern with 114.3 mm mounting bolt circle diameter
- Outside diameter: 257.7 mm (10.146 in.)
- Nominal thickness: 10.0 mm (0.394 in.)
- Discard thickness: 8.4 mm (0.331 in.)
- Center hole diameter: 90.2 mm
Detailed Description
The Centric Premium Disc Brake Rotors 120.46050 is engineered for rear brake service on the 1997-2004 Mitsubishi Diamante. It features a solid rotor design, smooth friction surface, and coated finish details that help maintain appearance and resist corrosion in wet, salty, and high-moisture environments. The electrocoating process is a key part of the Centric Premium Disc Brake Rotors line, providing more durable protection than basic phosphate finishes that can lose effectiveness after installation.
This rotor measures 257.7 mm in outside diameter, 56.8 mm in overall height, and 90.2 mm at the center hole. It also uses a floating / DIH mounting type and includes one miscellaneous hole as listed in the product data. For shoppers searching for a rear brake rotor for Mitsubishi Diamante, Centric 120.46050 offers the fitment and finish details needed for a straightforward brake repair.
This part cross-references Febi-Bilstein 31225 for the same application.
What It Helps Address
- Brake rotor rust on exposed surfaces
- Rear brake vibration caused by worn rotor surfaces
- Reduced braking consistency from rotor wear
- Brake service needs on a Mitsubishi Diamante rear axle
- Replacement of a rotor that has reached discard thickness
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat and runs true. Inspect rear pads, caliper hardware, and parking brake components during service, and measure rotor thickness after installation to confirm it remains above discard limits.
Fits 1997-2004 Mitsubishi Diamante, rear.
Quality Assurance
Centric Premium Disc Brake Rotors are manufactured with an electrocoated corrosion-protection finish intended to withstand extended salt-water exposure without rusting. The coated hat and protected surfaces support long-term durability in brake service applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium Rear Disc Brake Rotor
Centric Premium Disc Brake Rotors are built for consistent braking performance and corrosion resistance in everyday driving conditions. This Centric 120.46050 rear disc brake rotor uses an electrocoated finish on the hat and friction surfaces to help protect against rust after installation.
Compatible With 1997-2004 Mitsubishi Diamante rear applications, this rotor is a direct-fit replacement for drivers servicing the rear brake system on the Mitsubishi Diamante. The Centric Premium Disc Brake Rotors line focuses on OE-style fit and finish with surface protection that outlasts basic phosphate coatings.
Key Features
- Centric Premium Disc Brake Rotors part number 120.46050
- Rear solid disc brake rotor for Mitsubishi Diamante applications
- Electrocoated finish for long-lasting corrosion protection
- Coated hat finish helps resist rust on exposed surfaces
- Smooth surface type for brake pad contact
- 5-lug bolt pattern with 114.3 mm mounting bolt circle diameter
- Outside diameter: 257.7 mm (10.146 in.)
- Nominal thickness: 10.0 mm (0.394 in.)
- Discard thickness: 8.4 mm (0.331 in.)
- Center hole diameter: 90.2 mm
Detailed Description
The Centric Premium Disc Brake Rotors 120.46050 is engineered for rear brake service on the 1997-2004 Mitsubishi Diamante. It features a solid rotor design, smooth friction surface, and coated finish details that help maintain appearance and resist corrosion in wet, salty, and high-moisture environments. The electrocoating process is a key part of the Centric Premium Disc Brake Rotors line, providing more durable protection than basic phosphate finishes that can lose effectiveness after installation.
This rotor measures 257.7 mm in outside diameter, 56.8 mm in overall height, and 90.2 mm at the center hole. It also uses a floating / DIH mounting type and includes one miscellaneous hole as listed in the product data. For shoppers searching for a rear brake rotor for Mitsubishi Diamante, Centric 120.46050 offers the fitment and finish details needed for a straightforward brake repair.
This part cross-references Febi-Bilstein 31225 for the same application.
What It Helps Address
- Brake rotor rust on exposed surfaces
- Rear brake vibration caused by worn rotor surfaces
- Reduced braking consistency from rotor wear
- Brake service needs on a Mitsubishi Diamante rear axle
- Replacement of a rotor that has reached discard thickness
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat and runs true. Inspect rear pads, caliper hardware, and parking brake components during service, and measure rotor thickness after installation to confirm it remains above discard limits.
Fits 1997-2004 Mitsubishi Diamante, rear.
Quality Assurance
Centric Premium Disc Brake Rotors are manufactured with an electrocoated corrosion-protection finish intended to withstand extended salt-water exposure without rusting. The coated hat and protected surfaces support long-term durability in brake service applications.
