Centric 120.65142 Disc Brake Rotor - Front
Centric Premium Rotor for Ford F-350 Super Duty
Centric Premium Disc Brake Rotor part number 120.65142 is built for front brake service on select Ford F-350 Super Duty dual rear wheel applications. It uses a coated finish for corrosion resistance and a smooth, vented design for consistent braking performance.
Key Features
- Centric Premium Disc Brake Rotors line
- Part number 120.65142
- Front disc brake rotor for Ford F-350 Super Duty DRW applications
- Electrocoated finish for long-lasting corrosion protection
- Vented rotor design with smooth surface type
- 8-bolt, hub-and-rotor mounting configuration
- ABS tone ring included
- Outside diameter: 363.0 mm (14.291 in)
- Nominal thickness: 38.0 mm (1.496 in)
- Discard thickness: 36.4 mm (1.433 in)
Product Details
The Centric Premium Disc Brake Rotors product line focuses on corrosion resistance and stable rotor performance in demanding service conditions. This rotor uses an electrocoating finish rather than a basic phosphate coating, helping protect the metal surface after installation and during exposure to moisture and road salt. The vented, straight-vane construction supports heat management, while the coated hat finish adds additional protection in the hub area. This part cross-references Raybestos Brakes 681785 for the same application.
Compatible With 2021-2022 Ford F-350 Super Duty, front DRW applications and 2013-2020 Ford F-350 Super Duty, front heavy-duty dual rear wheel applications. It also fits 2012 Ford F-350 Super Duty, front DRW vehicles built after 10/22/12. If you are searching for a Ford F-350 Super Duty front brake rotor, Centric 120.65142 is a direct-fit option for these listed configurations.
Common Brake Issues This Rotor Can Address
- Rotor corrosion from road salt, moisture, and storage exposure
- Brake pulsation caused by worn or below-spec rotor thickness
- Reduced braking consistency from heat buildup in heavy-duty use
- Surface wear on front brake components in DRW applications
- Replacement needs during front brake service on Ford F-350 Super Duty trucks
Installation Notes and Tips
Verify rotor thickness, hub condition, and wheel-end cleanliness before installation. Confirm the vehicle is a front dual rear wheel or heavy-duty dual rear wheel application listed in the fitment data. Because this rotor uses hub-and-rotor mounting with an 8-bolt pattern and ABS tone ring, match the existing brake and hub configuration before assembly.
Quality Assurance
Centric designs this Premium Disc Brake Rotor with an electrocoated finish for extended corrosion protection and a vented construction for heavy-duty braking service. Part number 120.65142 is engineered to meet the listed fitment requirements for Ford F-350 Super Duty front brake applications.
Original: $223.66
-65%$223.66
$78.28Centric 120.65142 Disc Brake Rotor - Front
Centric Premium Rotor for Ford F-350 Super Duty
Centric Premium Disc Brake Rotor part number 120.65142 is built for front brake service on select Ford F-350 Super Duty dual rear wheel applications. It uses a coated finish for corrosion resistance and a smooth, vented design for consistent braking performance.
Key Features
- Centric Premium Disc Brake Rotors line
- Part number 120.65142
- Front disc brake rotor for Ford F-350 Super Duty DRW applications
- Electrocoated finish for long-lasting corrosion protection
- Vented rotor design with smooth surface type
- 8-bolt, hub-and-rotor mounting configuration
- ABS tone ring included
- Outside diameter: 363.0 mm (14.291 in)
- Nominal thickness: 38.0 mm (1.496 in)
- Discard thickness: 36.4 mm (1.433 in)
Product Details
The Centric Premium Disc Brake Rotors product line focuses on corrosion resistance and stable rotor performance in demanding service conditions. This rotor uses an electrocoating finish rather than a basic phosphate coating, helping protect the metal surface after installation and during exposure to moisture and road salt. The vented, straight-vane construction supports heat management, while the coated hat finish adds additional protection in the hub area. This part cross-references Raybestos Brakes 681785 for the same application.
Compatible With 2021-2022 Ford F-350 Super Duty, front DRW applications and 2013-2020 Ford F-350 Super Duty, front heavy-duty dual rear wheel applications. It also fits 2012 Ford F-350 Super Duty, front DRW vehicles built after 10/22/12. If you are searching for a Ford F-350 Super Duty front brake rotor, Centric 120.65142 is a direct-fit option for these listed configurations.
Common Brake Issues This Rotor Can Address
- Rotor corrosion from road salt, moisture, and storage exposure
- Brake pulsation caused by worn or below-spec rotor thickness
- Reduced braking consistency from heat buildup in heavy-duty use
- Surface wear on front brake components in DRW applications
- Replacement needs during front brake service on Ford F-350 Super Duty trucks
Installation Notes and Tips
Verify rotor thickness, hub condition, and wheel-end cleanliness before installation. Confirm the vehicle is a front dual rear wheel or heavy-duty dual rear wheel application listed in the fitment data. Because this rotor uses hub-and-rotor mounting with an 8-bolt pattern and ABS tone ring, match the existing brake and hub configuration before assembly.
Quality Assurance
Centric designs this Premium Disc Brake Rotor with an electrocoated finish for extended corrosion protection and a vented construction for heavy-duty braking service. Part number 120.65142 is engineered to meet the listed fitment requirements for Ford F-350 Super Duty front brake applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium Rotor for Ford F-350 Super Duty
Centric Premium Disc Brake Rotor part number 120.65142 is built for front brake service on select Ford F-350 Super Duty dual rear wheel applications. It uses a coated finish for corrosion resistance and a smooth, vented design for consistent braking performance.
Key Features
- Centric Premium Disc Brake Rotors line
- Part number 120.65142
- Front disc brake rotor for Ford F-350 Super Duty DRW applications
- Electrocoated finish for long-lasting corrosion protection
- Vented rotor design with smooth surface type
- 8-bolt, hub-and-rotor mounting configuration
- ABS tone ring included
- Outside diameter: 363.0 mm (14.291 in)
- Nominal thickness: 38.0 mm (1.496 in)
- Discard thickness: 36.4 mm (1.433 in)
Product Details
The Centric Premium Disc Brake Rotors product line focuses on corrosion resistance and stable rotor performance in demanding service conditions. This rotor uses an electrocoating finish rather than a basic phosphate coating, helping protect the metal surface after installation and during exposure to moisture and road salt. The vented, straight-vane construction supports heat management, while the coated hat finish adds additional protection in the hub area. This part cross-references Raybestos Brakes 681785 for the same application.
Compatible With 2021-2022 Ford F-350 Super Duty, front DRW applications and 2013-2020 Ford F-350 Super Duty, front heavy-duty dual rear wheel applications. It also fits 2012 Ford F-350 Super Duty, front DRW vehicles built after 10/22/12. If you are searching for a Ford F-350 Super Duty front brake rotor, Centric 120.65142 is a direct-fit option for these listed configurations.
Common Brake Issues This Rotor Can Address
- Rotor corrosion from road salt, moisture, and storage exposure
- Brake pulsation caused by worn or below-spec rotor thickness
- Reduced braking consistency from heat buildup in heavy-duty use
- Surface wear on front brake components in DRW applications
- Replacement needs during front brake service on Ford F-350 Super Duty trucks
Installation Notes and Tips
Verify rotor thickness, hub condition, and wheel-end cleanliness before installation. Confirm the vehicle is a front dual rear wheel or heavy-duty dual rear wheel application listed in the fitment data. Because this rotor uses hub-and-rotor mounting with an 8-bolt pattern and ABS tone ring, match the existing brake and hub configuration before assembly.
Quality Assurance
Centric designs this Premium Disc Brake Rotor with an electrocoated finish for extended corrosion protection and a vented construction for heavy-duty braking service. Part number 120.65142 is engineered to meet the listed fitment requirements for Ford F-350 Super Duty front brake applications.
