Centric 120.66047 Disc Brake Rotor - Front
Centric Premium Front Brake Rotor
Centric Premium Disc Brake Rotor 120.66047 is a front rotor built for vehicles that need consistent braking performance and corrosion protection. It uses an electrocoated finish to help resist rust after installation, making it a practical choice for daily-driven Buick Rendezvous, Pontiac Aztek, Oldsmobile Silhouette, and Pontiac Montana applications.
Key Features
- Centric Premium Disc Brake Rotors line
- Part number 120.66047
- Front disc brake rotor for confirmed fitment applications
- Vented rotor design with smooth braking surface
- Electrocoated hat finish for corrosion resistance
- 5-bolt hole pattern with 114.3 mm bolt circle
- 300 mm outside diameter and 30 mm nominal thickness
- 71 mm center hole diameter
- Straight vane style
Product Details
The Centric Premium Disc Brake Rotors product line focuses on corrosion protection where it matters most after installation. This rotor uses an electrocoating finish rather than a basic phosphate coating, helping protect the rotor from moisture and road exposure over time. The smooth, vented design supports stable front brake operation, while the coated hat finish helps maintain a cleaner appearance around the hub area.
Part number 120.66047 is a direct-fit front rotor for 2001-2005 Pontiac Aztek, 2002-2006 Buick Rendezvous, 2002-2004 Oldsmobile Silhouette, and 2002-2004 Pontiac Montana. This part cross-references Raybestos Brakes 580031 for the same application.
Common Problems This Rotor Can Address
- Rust buildup on the rotor hat and non-friction surfaces
- Brake pulsation caused by worn or out-of-spec front rotors
- Reduced braking consistency from heat-affected rotor surfaces
- Noise or vibration linked to uneven rotor wear
- Replacement needs for front brake service on listed GM minivan and crossover applications
Installation Notes and Tips
Verify rotor dimensions, hub bore, and bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware for wear before completing the brake service. For best results, follow the vehicle manufacturer’s brake bedding procedure after installation.
Compatible With 2001-2005 Pontiac Aztek, front; 2002-2006 Buick Rendezvous, front; 2002-2004 Oldsmobile Silhouette, front; and 2002-2004 Pontiac Montana, front. Part number 120.66047 is also listed under Centric Parts 120.66047.
Quality Assurance
Centric Premium Disc Brake Rotors are engineered with an electrocoated finish that is designed to withstand extended salt-water exposure without rusting, offering stronger corrosion protection than basic phosphate-coated rotors.
Centric 120.66047 Disc Brake Rotor - Front
Centric Premium Front Brake Rotor
Centric Premium Disc Brake Rotor 120.66047 is a front rotor built for vehicles that need consistent braking performance and corrosion protection. It uses an electrocoated finish to help resist rust after installation, making it a practical choice for daily-driven Buick Rendezvous, Pontiac Aztek, Oldsmobile Silhouette, and Pontiac Montana applications.
Key Features
- Centric Premium Disc Brake Rotors line
- Part number 120.66047
- Front disc brake rotor for confirmed fitment applications
- Vented rotor design with smooth braking surface
- Electrocoated hat finish for corrosion resistance
- 5-bolt hole pattern with 114.3 mm bolt circle
- 300 mm outside diameter and 30 mm nominal thickness
- 71 mm center hole diameter
- Straight vane style
Product Details
The Centric Premium Disc Brake Rotors product line focuses on corrosion protection where it matters most after installation. This rotor uses an electrocoating finish rather than a basic phosphate coating, helping protect the rotor from moisture and road exposure over time. The smooth, vented design supports stable front brake operation, while the coated hat finish helps maintain a cleaner appearance around the hub area.
Part number 120.66047 is a direct-fit front rotor for 2001-2005 Pontiac Aztek, 2002-2006 Buick Rendezvous, 2002-2004 Oldsmobile Silhouette, and 2002-2004 Pontiac Montana. This part cross-references Raybestos Brakes 580031 for the same application.
Common Problems This Rotor Can Address
- Rust buildup on the rotor hat and non-friction surfaces
- Brake pulsation caused by worn or out-of-spec front rotors
- Reduced braking consistency from heat-affected rotor surfaces
- Noise or vibration linked to uneven rotor wear
- Replacement needs for front brake service on listed GM minivan and crossover applications
Installation Notes and Tips
Verify rotor dimensions, hub bore, and bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware for wear before completing the brake service. For best results, follow the vehicle manufacturer’s brake bedding procedure after installation.
Compatible With 2001-2005 Pontiac Aztek, front; 2002-2006 Buick Rendezvous, front; 2002-2004 Oldsmobile Silhouette, front; and 2002-2004 Pontiac Montana, front. Part number 120.66047 is also listed under Centric Parts 120.66047.
Quality Assurance
Centric Premium Disc Brake Rotors are engineered with an electrocoated finish that is designed to withstand extended salt-water exposure without rusting, offering stronger corrosion protection than basic phosphate-coated rotors.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium Front Brake Rotor
Centric Premium Disc Brake Rotor 120.66047 is a front rotor built for vehicles that need consistent braking performance and corrosion protection. It uses an electrocoated finish to help resist rust after installation, making it a practical choice for daily-driven Buick Rendezvous, Pontiac Aztek, Oldsmobile Silhouette, and Pontiac Montana applications.
Key Features
- Centric Premium Disc Brake Rotors line
- Part number 120.66047
- Front disc brake rotor for confirmed fitment applications
- Vented rotor design with smooth braking surface
- Electrocoated hat finish for corrosion resistance
- 5-bolt hole pattern with 114.3 mm bolt circle
- 300 mm outside diameter and 30 mm nominal thickness
- 71 mm center hole diameter
- Straight vane style
Product Details
The Centric Premium Disc Brake Rotors product line focuses on corrosion protection where it matters most after installation. This rotor uses an electrocoating finish rather than a basic phosphate coating, helping protect the rotor from moisture and road exposure over time. The smooth, vented design supports stable front brake operation, while the coated hat finish helps maintain a cleaner appearance around the hub area.
Part number 120.66047 is a direct-fit front rotor for 2001-2005 Pontiac Aztek, 2002-2006 Buick Rendezvous, 2002-2004 Oldsmobile Silhouette, and 2002-2004 Pontiac Montana. This part cross-references Raybestos Brakes 580031 for the same application.
Common Problems This Rotor Can Address
- Rust buildup on the rotor hat and non-friction surfaces
- Brake pulsation caused by worn or out-of-spec front rotors
- Reduced braking consistency from heat-affected rotor surfaces
- Noise or vibration linked to uneven rotor wear
- Replacement needs for front brake service on listed GM minivan and crossover applications
Installation Notes and Tips
Verify rotor dimensions, hub bore, and bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware for wear before completing the brake service. For best results, follow the vehicle manufacturer’s brake bedding procedure after installation.
Compatible With 2001-2005 Pontiac Aztek, front; 2002-2006 Buick Rendezvous, front; 2002-2004 Oldsmobile Silhouette, front; and 2002-2004 Pontiac Montana, front. Part number 120.66047 is also listed under Centric Parts 120.66047.
Quality Assurance
Centric Premium Disc Brake Rotors are engineered with an electrocoated finish that is designed to withstand extended salt-water exposure without rusting, offering stronger corrosion protection than basic phosphate-coated rotors.
