Centric 120.80018 Disc Brake Rotor - Front
Centric Premium Disc Brake Rotor Overview
The Centric Premium Disc Brake Rotor, part number 120.80018, is built for drivers who need consistent braking performance and corrosion resistance in demanding conditions. Its vented, smooth-surface design and electrocoated finish make it a practical choice for brake service on vehicles that use an 8-bolt, behind-the-hub rotor layout.
Compatible With select heavy-duty applications such as Ford F-350 and Ford F-450 brake rotor replacements, this rotor is engineered around the dimensions and mounting style listed below. The Centric Premium Disc Brake Rotors line focuses on durable rotor protection and stable fitment for service work where rust prevention matters.
Key Features
- Part number 120.80018 from Centric Premium Disc Brake Rotors
- Electrocoated finish for long-lasting corrosion protection
- Vented rotor design with straight vanes for heat management
- Smooth surface type for brake pad contact
- Outside diameter: 15.000 in. / 381 mm
- Nominal thickness: 1.535 in. / 39 mm
- Discard thickness: 1.420 in. / 36.07 mm
- 8 bolt holes with behind-the-hub mounting
Detailed Product Description
Centric designed this disc brake rotor with an electrocoating finish that resists corrosion far beyond basic phosphate coatings, which are typically limited to storage protection. The e-coat surface is built to stand up to moisture and road exposure after installation, helping preserve rotor condition over time. With a vented construction, straight vane layout, and U-shaped notes in the catalog data, this rotor is suited to applications that require a large, heavy-duty brake rotor with stable thermal characteristics.
Use part number 120.80018 when you need a replacement rotor that matches the listed dimensions: 15.000-inch outside diameter, 7.480-inch center hole diameter, 10.815-inch bolt circle diameter, and 0.835-inch mounting bolt hole diameter. This rotor is also referenced by cross numbers such as Raybestos Brakes 580726 and DuraGo BR901558 for the same application.
Common Problems This Rotor Can Address
- Brake rotor rust on exposed surfaces after installation
- Brake pulsation caused by worn or below-spec rotors
- Reduced braking consistency from heat-stressed rotor surfaces
- Fitment issues when replacing a behind-the-hub, 8-bolt rotor
- Service delays when matching OE-style dimensions for Ford F-350 or Ford F-450 brake work
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, center hole diameter, and mounting style before installation. This rotor uses a behind-the-hub mounting design and does not include ABS tone ring or bearings. For best results, inspect pads, caliper condition, and hub surfaces during brake service, and clean the hub face before mounting the rotor.
Fits 2006-2011 Ford F-350, rear; fits 2006-2011 Ford F-450, rear. Confirm the application details against your vehicle’s brake specifications before ordering part number 120.80018.
Quality Assurance
Centric Premium Disc Brake Rotors are built with an electrocoated finish intended to provide durable corrosion protection in service. The product data supplied for part number 120.80018 supports OE-style replacement use where dimensional accuracy and surface protection are important.
Centric 120.80018 Disc Brake Rotor - Front
Centric Premium Disc Brake Rotor Overview
The Centric Premium Disc Brake Rotor, part number 120.80018, is built for drivers who need consistent braking performance and corrosion resistance in demanding conditions. Its vented, smooth-surface design and electrocoated finish make it a practical choice for brake service on vehicles that use an 8-bolt, behind-the-hub rotor layout.
Compatible With select heavy-duty applications such as Ford F-350 and Ford F-450 brake rotor replacements, this rotor is engineered around the dimensions and mounting style listed below. The Centric Premium Disc Brake Rotors line focuses on durable rotor protection and stable fitment for service work where rust prevention matters.
Key Features
- Part number 120.80018 from Centric Premium Disc Brake Rotors
- Electrocoated finish for long-lasting corrosion protection
- Vented rotor design with straight vanes for heat management
- Smooth surface type for brake pad contact
- Outside diameter: 15.000 in. / 381 mm
- Nominal thickness: 1.535 in. / 39 mm
- Discard thickness: 1.420 in. / 36.07 mm
- 8 bolt holes with behind-the-hub mounting
Detailed Product Description
Centric designed this disc brake rotor with an electrocoating finish that resists corrosion far beyond basic phosphate coatings, which are typically limited to storage protection. The e-coat surface is built to stand up to moisture and road exposure after installation, helping preserve rotor condition over time. With a vented construction, straight vane layout, and U-shaped notes in the catalog data, this rotor is suited to applications that require a large, heavy-duty brake rotor with stable thermal characteristics.
Use part number 120.80018 when you need a replacement rotor that matches the listed dimensions: 15.000-inch outside diameter, 7.480-inch center hole diameter, 10.815-inch bolt circle diameter, and 0.835-inch mounting bolt hole diameter. This rotor is also referenced by cross numbers such as Raybestos Brakes 580726 and DuraGo BR901558 for the same application.
Common Problems This Rotor Can Address
- Brake rotor rust on exposed surfaces after installation
- Brake pulsation caused by worn or below-spec rotors
- Reduced braking consistency from heat-stressed rotor surfaces
- Fitment issues when replacing a behind-the-hub, 8-bolt rotor
- Service delays when matching OE-style dimensions for Ford F-350 or Ford F-450 brake work
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, center hole diameter, and mounting style before installation. This rotor uses a behind-the-hub mounting design and does not include ABS tone ring or bearings. For best results, inspect pads, caliper condition, and hub surfaces during brake service, and clean the hub face before mounting the rotor.
Fits 2006-2011 Ford F-350, rear; fits 2006-2011 Ford F-450, rear. Confirm the application details against your vehicle’s brake specifications before ordering part number 120.80018.
Quality Assurance
Centric Premium Disc Brake Rotors are built with an electrocoated finish intended to provide durable corrosion protection in service. The product data supplied for part number 120.80018 supports OE-style replacement use where dimensional accuracy and surface protection are important.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium Disc Brake Rotor Overview
The Centric Premium Disc Brake Rotor, part number 120.80018, is built for drivers who need consistent braking performance and corrosion resistance in demanding conditions. Its vented, smooth-surface design and electrocoated finish make it a practical choice for brake service on vehicles that use an 8-bolt, behind-the-hub rotor layout.
Compatible With select heavy-duty applications such as Ford F-350 and Ford F-450 brake rotor replacements, this rotor is engineered around the dimensions and mounting style listed below. The Centric Premium Disc Brake Rotors line focuses on durable rotor protection and stable fitment for service work where rust prevention matters.
Key Features
- Part number 120.80018 from Centric Premium Disc Brake Rotors
- Electrocoated finish for long-lasting corrosion protection
- Vented rotor design with straight vanes for heat management
- Smooth surface type for brake pad contact
- Outside diameter: 15.000 in. / 381 mm
- Nominal thickness: 1.535 in. / 39 mm
- Discard thickness: 1.420 in. / 36.07 mm
- 8 bolt holes with behind-the-hub mounting
Detailed Product Description
Centric designed this disc brake rotor with an electrocoating finish that resists corrosion far beyond basic phosphate coatings, which are typically limited to storage protection. The e-coat surface is built to stand up to moisture and road exposure after installation, helping preserve rotor condition over time. With a vented construction, straight vane layout, and U-shaped notes in the catalog data, this rotor is suited to applications that require a large, heavy-duty brake rotor with stable thermal characteristics.
Use part number 120.80018 when you need a replacement rotor that matches the listed dimensions: 15.000-inch outside diameter, 7.480-inch center hole diameter, 10.815-inch bolt circle diameter, and 0.835-inch mounting bolt hole diameter. This rotor is also referenced by cross numbers such as Raybestos Brakes 580726 and DuraGo BR901558 for the same application.
Common Problems This Rotor Can Address
- Brake rotor rust on exposed surfaces after installation
- Brake pulsation caused by worn or below-spec rotors
- Reduced braking consistency from heat-stressed rotor surfaces
- Fitment issues when replacing a behind-the-hub, 8-bolt rotor
- Service delays when matching OE-style dimensions for Ford F-350 or Ford F-450 brake work
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, center hole diameter, and mounting style before installation. This rotor uses a behind-the-hub mounting design and does not include ABS tone ring or bearings. For best results, inspect pads, caliper condition, and hub surfaces during brake service, and clean the hub face before mounting the rotor.
Fits 2006-2011 Ford F-350, rear; fits 2006-2011 Ford F-450, rear. Confirm the application details against your vehicle’s brake specifications before ordering part number 120.80018.
Quality Assurance
Centric Premium Disc Brake Rotors are built with an electrocoated finish intended to provide durable corrosion protection in service. The product data supplied for part number 120.80018 supports OE-style replacement use where dimensional accuracy and surface protection are important.
