Centric 121.34102 Disc Brake Rotor - Front
Centric C-TEK Standard Disc Brake Rotor
Centric C-TEK Standard Disc Brake Rotors are built for drivers who want consistent braking performance, dependable service life, and practical value. Part number 121.34102 is a vented disc brake rotor with a smooth surface and OE-style dimensions for a direct replacement application.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for everyday braking service
- Part number 121.34102
- Vented rotor design with straight vane style for heat management
- Smooth surface type for standard brake pad contact
- Outside diameter: 14.724 in. / 374.000 mm
- Nominal thickness: 1.413 in. / 35.900 mm
- Discard thickness: 1.354 in. / 34.400 mm
- Overall height: 3.189 in. / 81.000 mm
- 5-lug pattern with 4.724 in. / 120.000 mm bolt circle
- Center hole diameter: 3.110 in. / 79.000 mm
- Floating disc mounting with 1 miscellaneous hole
Product Details
The Centric C-TEK Standard Disc Brake Rotors line focuses on practical replacement parts for a wide range of braking applications. This rotor uses a vented construction, straight vanes, and a smooth friction surface to support stable pad contact and predictable braking response. Part number 121.34102 is a strong match for service work where OE-style dimensions and straightforward fitment matter. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For shoppers searching for a Centric brake rotor for Honda Civic or a replacement disc brake rotor for Honda Civic applications, 121.34102 provides the dimensional details needed to verify fitment before installation. It is also a relevant search option for drivers comparing Centric 121.34102 against other OE-style vented rotors in the same size class.
What It Helps Address
- Brake pulsation caused by a worn or out-of-spec rotor
- Reduced braking consistency from uneven rotor surface wear
- Heat buildup during repeated stops with a vented rotor design
- Service replacement needs for a 5-lug disc brake rotor application
- Fitment verification for Honda Civic brake rotor searches and similar vehicle-specific queries
Installation Notes and Tips
Confirm rotor diameter, center hole diameter, bolt circle, lug count, and thickness before installation. Clean the hub mounting surface, inspect pads and caliper hardware, and measure the existing rotor to confirm it is within discard thickness limits. For best results, replace brake pads if they are unevenly worn and follow the vehicle manufacturer’s torque specifications during wheel installation. Search terms such as Honda Civic brake rotor replacement and Centric 121.34102 disc brake rotor are useful when verifying the correct application.
Quality Assurance
Centric positions the C-TEK Standard Disc Brake Rotors line as a value-focused replacement option with dependable performance and service life for everyday use. Part number 121.34102 is manufactured to support consistent fit and braking function when matched to the correct application.
Centric 121.34102 Disc Brake Rotor - Front
Centric C-TEK Standard Disc Brake Rotor
Centric C-TEK Standard Disc Brake Rotors are built for drivers who want consistent braking performance, dependable service life, and practical value. Part number 121.34102 is a vented disc brake rotor with a smooth surface and OE-style dimensions for a direct replacement application.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for everyday braking service
- Part number 121.34102
- Vented rotor design with straight vane style for heat management
- Smooth surface type for standard brake pad contact
- Outside diameter: 14.724 in. / 374.000 mm
- Nominal thickness: 1.413 in. / 35.900 mm
- Discard thickness: 1.354 in. / 34.400 mm
- Overall height: 3.189 in. / 81.000 mm
- 5-lug pattern with 4.724 in. / 120.000 mm bolt circle
- Center hole diameter: 3.110 in. / 79.000 mm
- Floating disc mounting with 1 miscellaneous hole
Product Details
The Centric C-TEK Standard Disc Brake Rotors line focuses on practical replacement parts for a wide range of braking applications. This rotor uses a vented construction, straight vanes, and a smooth friction surface to support stable pad contact and predictable braking response. Part number 121.34102 is a strong match for service work where OE-style dimensions and straightforward fitment matter. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For shoppers searching for a Centric brake rotor for Honda Civic or a replacement disc brake rotor for Honda Civic applications, 121.34102 provides the dimensional details needed to verify fitment before installation. It is also a relevant search option for drivers comparing Centric 121.34102 against other OE-style vented rotors in the same size class.
What It Helps Address
- Brake pulsation caused by a worn or out-of-spec rotor
- Reduced braking consistency from uneven rotor surface wear
- Heat buildup during repeated stops with a vented rotor design
- Service replacement needs for a 5-lug disc brake rotor application
- Fitment verification for Honda Civic brake rotor searches and similar vehicle-specific queries
Installation Notes and Tips
Confirm rotor diameter, center hole diameter, bolt circle, lug count, and thickness before installation. Clean the hub mounting surface, inspect pads and caliper hardware, and measure the existing rotor to confirm it is within discard thickness limits. For best results, replace brake pads if they are unevenly worn and follow the vehicle manufacturer’s torque specifications during wheel installation. Search terms such as Honda Civic brake rotor replacement and Centric 121.34102 disc brake rotor are useful when verifying the correct application.
Quality Assurance
Centric positions the C-TEK Standard Disc Brake Rotors line as a value-focused replacement option with dependable performance and service life for everyday use. Part number 121.34102 is manufactured to support consistent fit and braking function when matched to the correct application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric C-TEK Standard Disc Brake Rotor
Centric C-TEK Standard Disc Brake Rotors are built for drivers who want consistent braking performance, dependable service life, and practical value. Part number 121.34102 is a vented disc brake rotor with a smooth surface and OE-style dimensions for a direct replacement application.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for everyday braking service
- Part number 121.34102
- Vented rotor design with straight vane style for heat management
- Smooth surface type for standard brake pad contact
- Outside diameter: 14.724 in. / 374.000 mm
- Nominal thickness: 1.413 in. / 35.900 mm
- Discard thickness: 1.354 in. / 34.400 mm
- Overall height: 3.189 in. / 81.000 mm
- 5-lug pattern with 4.724 in. / 120.000 mm bolt circle
- Center hole diameter: 3.110 in. / 79.000 mm
- Floating disc mounting with 1 miscellaneous hole
Product Details
The Centric C-TEK Standard Disc Brake Rotors line focuses on practical replacement parts for a wide range of braking applications. This rotor uses a vented construction, straight vanes, and a smooth friction surface to support stable pad contact and predictable braking response. Part number 121.34102 is a strong match for service work where OE-style dimensions and straightforward fitment matter. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For shoppers searching for a Centric brake rotor for Honda Civic or a replacement disc brake rotor for Honda Civic applications, 121.34102 provides the dimensional details needed to verify fitment before installation. It is also a relevant search option for drivers comparing Centric 121.34102 against other OE-style vented rotors in the same size class.
What It Helps Address
- Brake pulsation caused by a worn or out-of-spec rotor
- Reduced braking consistency from uneven rotor surface wear
- Heat buildup during repeated stops with a vented rotor design
- Service replacement needs for a 5-lug disc brake rotor application
- Fitment verification for Honda Civic brake rotor searches and similar vehicle-specific queries
Installation Notes and Tips
Confirm rotor diameter, center hole diameter, bolt circle, lug count, and thickness before installation. Clean the hub mounting surface, inspect pads and caliper hardware, and measure the existing rotor to confirm it is within discard thickness limits. For best results, replace brake pads if they are unevenly worn and follow the vehicle manufacturer’s torque specifications during wheel installation. Search terms such as Honda Civic brake rotor replacement and Centric 121.34102 disc brake rotor are useful when verifying the correct application.
Quality Assurance
Centric positions the C-TEK Standard Disc Brake Rotors line as a value-focused replacement option with dependable performance and service life for everyday use. Part number 121.34102 is manufactured to support consistent fit and braking function when matched to the correct application.
