Centric 121.35038 Disc Brake Rotor - Front
Centric C-TEK Front Disc Brake Rotor
The Centric 121.35038 C-TEK Standard Disc Brake Rotor is an OE-style replacement for front brake service on select Mercedes-Benz applications. It combines a smooth friction surface, vented construction, and curved vane design to support consistent braking performance on the road.
Built for 2000-2002 Mercedes-Benz CL500, 2000-2002 Mercedes-Benz S430, and 2000-2002 Mercedes-Benz S500 front brake applications, this rotor is part of the Centric C-TEK Standard Disc Brake Rotors line. The C-TEK line focuses on affordable OE replacement coverage, and each rotor is protected with rust preventative oil while on the shelf.
Key Features
- Part number 121.35038 for front disc brake service
- Fits 2000-2002 Mercedes-Benz CL500, front
- Fits 2000-2002 Mercedes-Benz S430, front
- Fits 2000-2002 Mercedes-Benz S500, front; 2002 S500 without Armored Body Equipment
- Vented rotor with curved vane style for heat management
- Smooth surface type for brake pad contact
- Standard-grade rotor from the Centric C-TEK line
- Floating disc mounting, 5-lug pattern, 112 mm bolt circle
- Outside diameter: 330 mm; nominal thickness: 32 mm; discard thickness: 30 mm
Product Details
Centric 121.35038 is a front disc brake rotor engineered to match the dimensions and mounting layout used on select Mercedes-Benz CL500, S430, and S500 models. The rotor measures 330 mm in outside diameter, 32 mm nominal thickness, and 76 mm overall height, with a 67 mm center hole diameter and 112 mm bolt circle. Its vented, curved vane design helps move air through the rotor during braking, while the smooth face supports even pad contact.
This rotor is a practical OE replacement choice for drivers servicing Mercedes-Benz front brake systems and looking for a standard-grade rotor from the Centric C-TEK Standard Disc Brake Rotors family. The part number 121.35038 is also useful when cross-checking catalog listings for the same application.
What This Rotor Helps Address
- Brake pulsation caused by worn or uneven front rotors
- Reduced braking consistency from rotor wear beyond discard thickness
- Noise or vibration related to rotor surface condition
- Heat buildup during repeated braking events
- Front brake service needs on Mercedes-Benz CL500, S430, and S500 models
Installation Notes and Tips
Verify rotor dimensions, bolt circle, and hub fitment before installation. Inspect pads, calipers, and wheel hub surfaces during brake service, and replace any worn components as needed to restore proper braking performance. Clean the rotor friction surfaces before use to remove the protective oil applied for shelf storage.
Quality Assurance
Centric positions the C-TEK line as an affordable OE replacement option for brake service. This rotor is supplied with rust preventative oil for shelf protection, helping preserve the part before installation. This part cross-references Centric Parts (e.g., 121.35038) for the same application.
Centric 121.35038 Disc Brake Rotor - Front
Centric C-TEK Front Disc Brake Rotor
The Centric 121.35038 C-TEK Standard Disc Brake Rotor is an OE-style replacement for front brake service on select Mercedes-Benz applications. It combines a smooth friction surface, vented construction, and curved vane design to support consistent braking performance on the road.
Built for 2000-2002 Mercedes-Benz CL500, 2000-2002 Mercedes-Benz S430, and 2000-2002 Mercedes-Benz S500 front brake applications, this rotor is part of the Centric C-TEK Standard Disc Brake Rotors line. The C-TEK line focuses on affordable OE replacement coverage, and each rotor is protected with rust preventative oil while on the shelf.
Key Features
- Part number 121.35038 for front disc brake service
- Fits 2000-2002 Mercedes-Benz CL500, front
- Fits 2000-2002 Mercedes-Benz S430, front
- Fits 2000-2002 Mercedes-Benz S500, front; 2002 S500 without Armored Body Equipment
- Vented rotor with curved vane style for heat management
- Smooth surface type for brake pad contact
- Standard-grade rotor from the Centric C-TEK line
- Floating disc mounting, 5-lug pattern, 112 mm bolt circle
- Outside diameter: 330 mm; nominal thickness: 32 mm; discard thickness: 30 mm
Product Details
Centric 121.35038 is a front disc brake rotor engineered to match the dimensions and mounting layout used on select Mercedes-Benz CL500, S430, and S500 models. The rotor measures 330 mm in outside diameter, 32 mm nominal thickness, and 76 mm overall height, with a 67 mm center hole diameter and 112 mm bolt circle. Its vented, curved vane design helps move air through the rotor during braking, while the smooth face supports even pad contact.
This rotor is a practical OE replacement choice for drivers servicing Mercedes-Benz front brake systems and looking for a standard-grade rotor from the Centric C-TEK Standard Disc Brake Rotors family. The part number 121.35038 is also useful when cross-checking catalog listings for the same application.
What This Rotor Helps Address
- Brake pulsation caused by worn or uneven front rotors
- Reduced braking consistency from rotor wear beyond discard thickness
- Noise or vibration related to rotor surface condition
- Heat buildup during repeated braking events
- Front brake service needs on Mercedes-Benz CL500, S430, and S500 models
Installation Notes and Tips
Verify rotor dimensions, bolt circle, and hub fitment before installation. Inspect pads, calipers, and wheel hub surfaces during brake service, and replace any worn components as needed to restore proper braking performance. Clean the rotor friction surfaces before use to remove the protective oil applied for shelf storage.
Quality Assurance
Centric positions the C-TEK line as an affordable OE replacement option for brake service. This rotor is supplied with rust preventative oil for shelf protection, helping preserve the part before installation. This part cross-references Centric Parts (e.g., 121.35038) for the same application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric C-TEK Front Disc Brake Rotor
The Centric 121.35038 C-TEK Standard Disc Brake Rotor is an OE-style replacement for front brake service on select Mercedes-Benz applications. It combines a smooth friction surface, vented construction, and curved vane design to support consistent braking performance on the road.
Built for 2000-2002 Mercedes-Benz CL500, 2000-2002 Mercedes-Benz S430, and 2000-2002 Mercedes-Benz S500 front brake applications, this rotor is part of the Centric C-TEK Standard Disc Brake Rotors line. The C-TEK line focuses on affordable OE replacement coverage, and each rotor is protected with rust preventative oil while on the shelf.
Key Features
- Part number 121.35038 for front disc brake service
- Fits 2000-2002 Mercedes-Benz CL500, front
- Fits 2000-2002 Mercedes-Benz S430, front
- Fits 2000-2002 Mercedes-Benz S500, front; 2002 S500 without Armored Body Equipment
- Vented rotor with curved vane style for heat management
- Smooth surface type for brake pad contact
- Standard-grade rotor from the Centric C-TEK line
- Floating disc mounting, 5-lug pattern, 112 mm bolt circle
- Outside diameter: 330 mm; nominal thickness: 32 mm; discard thickness: 30 mm
Product Details
Centric 121.35038 is a front disc brake rotor engineered to match the dimensions and mounting layout used on select Mercedes-Benz CL500, S430, and S500 models. The rotor measures 330 mm in outside diameter, 32 mm nominal thickness, and 76 mm overall height, with a 67 mm center hole diameter and 112 mm bolt circle. Its vented, curved vane design helps move air through the rotor during braking, while the smooth face supports even pad contact.
This rotor is a practical OE replacement choice for drivers servicing Mercedes-Benz front brake systems and looking for a standard-grade rotor from the Centric C-TEK Standard Disc Brake Rotors family. The part number 121.35038 is also useful when cross-checking catalog listings for the same application.
What This Rotor Helps Address
- Brake pulsation caused by worn or uneven front rotors
- Reduced braking consistency from rotor wear beyond discard thickness
- Noise or vibration related to rotor surface condition
- Heat buildup during repeated braking events
- Front brake service needs on Mercedes-Benz CL500, S430, and S500 models
Installation Notes and Tips
Verify rotor dimensions, bolt circle, and hub fitment before installation. Inspect pads, calipers, and wheel hub surfaces during brake service, and replace any worn components as needed to restore proper braking performance. Clean the rotor friction surfaces before use to remove the protective oil applied for shelf storage.
Quality Assurance
Centric positions the C-TEK line as an affordable OE replacement option for brake service. This rotor is supplied with rust preventative oil for shelf protection, helping preserve the part before installation. This part cross-references Centric Parts (e.g., 121.35038) for the same application.
