Centric 121.36002 Disc Brake Rotor - Front
Centric C-TEK Rotor for Pontiac LeMans
Centric C-TEK Standard Disc Brake Rotor 121.36002 is a front solid rotor built for 1988-1989 Pontiac LeMans applications. It combines a smooth surface finish with OE-style dimensions to support consistent braking performance and dependable service life.
The C-TEK Standard Disc Brake Rotors line focuses on practical value for everyday driving, with coverage aimed at common replacement needs. For shoppers searching for a front brake rotor for 1988 Pontiac LeMans or 1989 Pontiac LeMans front brake service, this part number 121.36002 matches the listed fitment and dimensions.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line
- Part number 121.36002
- Front position rotor for 1988-1989 Pontiac LeMans
- Solid rotor design with smooth surface type
- Outside diameter: 236.000 mm / 9.291 in
- Nominal thickness: 12.600 mm / 0.496 in
- Discard thickness: 9.700 mm / 0.382 in
- Center hole diameter: 60.000 mm / 2.362 in
- Bolt circle diameter: 100.000 mm / 3.937 in
- 4 lug holes with 14.200 mm / 0.559 in hole diameter
- Overall height: 41.000 mm / 1.614 in
- ABS tone ring not included
- Bearings not included
Detailed Description
Centric 121.36002 is a solid disc brake rotor engineered for front brake replacement on the Pontiac LeMans. Its smooth surface and OE-style sizing support proper rotor fitment, while the listed thickness and diameter specifications help maintain correct brake system geometry during service. This rotor is a direct match for 1988-1989 Pontiac LeMans front brake repair when the original rotor meets the same dimensional requirements.
This part cross-references Monroe Shocks & Struts 5966 for the same application.
What It Helps Address
- Brake pulsation caused by worn or out-of-spec front rotors
- Reduced braking consistency from rotor wear
- Surface scoring on the existing Pontiac LeMans front rotor
- Brake service needs on 1988 Pontiac LeMans and 1989 Pontiac LeMans front brake systems
- Replacement of a solid disc brake rotor with matching dimensions
Installation Notes and Tips
Verify rotor diameter, center hole size, bolt circle, and thickness against the removed part before installation. Clean the hub mounting surface thoroughly to help the rotor seat evenly, and inspect pads, calipers, and hardware condition during brake service. After installation, follow the vehicle manufacturer’s brake bedding procedure.
Quality Assurance
Centric positions the C-TEK Standard Disc Brake Rotors line as a value-focused replacement option for a wide range of applications, with attention to service life and everyday performance. Part number 121.36002 is built to the listed specifications for the confirmed Pontiac LeMans fitment.
Centric 121.36002 Disc Brake Rotor - Front
Centric C-TEK Rotor for Pontiac LeMans
Centric C-TEK Standard Disc Brake Rotor 121.36002 is a front solid rotor built for 1988-1989 Pontiac LeMans applications. It combines a smooth surface finish with OE-style dimensions to support consistent braking performance and dependable service life.
The C-TEK Standard Disc Brake Rotors line focuses on practical value for everyday driving, with coverage aimed at common replacement needs. For shoppers searching for a front brake rotor for 1988 Pontiac LeMans or 1989 Pontiac LeMans front brake service, this part number 121.36002 matches the listed fitment and dimensions.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line
- Part number 121.36002
- Front position rotor for 1988-1989 Pontiac LeMans
- Solid rotor design with smooth surface type
- Outside diameter: 236.000 mm / 9.291 in
- Nominal thickness: 12.600 mm / 0.496 in
- Discard thickness: 9.700 mm / 0.382 in
- Center hole diameter: 60.000 mm / 2.362 in
- Bolt circle diameter: 100.000 mm / 3.937 in
- 4 lug holes with 14.200 mm / 0.559 in hole diameter
- Overall height: 41.000 mm / 1.614 in
- ABS tone ring not included
- Bearings not included
Detailed Description
Centric 121.36002 is a solid disc brake rotor engineered for front brake replacement on the Pontiac LeMans. Its smooth surface and OE-style sizing support proper rotor fitment, while the listed thickness and diameter specifications help maintain correct brake system geometry during service. This rotor is a direct match for 1988-1989 Pontiac LeMans front brake repair when the original rotor meets the same dimensional requirements.
This part cross-references Monroe Shocks & Struts 5966 for the same application.
What It Helps Address
- Brake pulsation caused by worn or out-of-spec front rotors
- Reduced braking consistency from rotor wear
- Surface scoring on the existing Pontiac LeMans front rotor
- Brake service needs on 1988 Pontiac LeMans and 1989 Pontiac LeMans front brake systems
- Replacement of a solid disc brake rotor with matching dimensions
Installation Notes and Tips
Verify rotor diameter, center hole size, bolt circle, and thickness against the removed part before installation. Clean the hub mounting surface thoroughly to help the rotor seat evenly, and inspect pads, calipers, and hardware condition during brake service. After installation, follow the vehicle manufacturer’s brake bedding procedure.
Quality Assurance
Centric positions the C-TEK Standard Disc Brake Rotors line as a value-focused replacement option for a wide range of applications, with attention to service life and everyday performance. Part number 121.36002 is built to the listed specifications for the confirmed Pontiac LeMans fitment.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric C-TEK Rotor for Pontiac LeMans
Centric C-TEK Standard Disc Brake Rotor 121.36002 is a front solid rotor built for 1988-1989 Pontiac LeMans applications. It combines a smooth surface finish with OE-style dimensions to support consistent braking performance and dependable service life.
The C-TEK Standard Disc Brake Rotors line focuses on practical value for everyday driving, with coverage aimed at common replacement needs. For shoppers searching for a front brake rotor for 1988 Pontiac LeMans or 1989 Pontiac LeMans front brake service, this part number 121.36002 matches the listed fitment and dimensions.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line
- Part number 121.36002
- Front position rotor for 1988-1989 Pontiac LeMans
- Solid rotor design with smooth surface type
- Outside diameter: 236.000 mm / 9.291 in
- Nominal thickness: 12.600 mm / 0.496 in
- Discard thickness: 9.700 mm / 0.382 in
- Center hole diameter: 60.000 mm / 2.362 in
- Bolt circle diameter: 100.000 mm / 3.937 in
- 4 lug holes with 14.200 mm / 0.559 in hole diameter
- Overall height: 41.000 mm / 1.614 in
- ABS tone ring not included
- Bearings not included
Detailed Description
Centric 121.36002 is a solid disc brake rotor engineered for front brake replacement on the Pontiac LeMans. Its smooth surface and OE-style sizing support proper rotor fitment, while the listed thickness and diameter specifications help maintain correct brake system geometry during service. This rotor is a direct match for 1988-1989 Pontiac LeMans front brake repair when the original rotor meets the same dimensional requirements.
This part cross-references Monroe Shocks & Struts 5966 for the same application.
What It Helps Address
- Brake pulsation caused by worn or out-of-spec front rotors
- Reduced braking consistency from rotor wear
- Surface scoring on the existing Pontiac LeMans front rotor
- Brake service needs on 1988 Pontiac LeMans and 1989 Pontiac LeMans front brake systems
- Replacement of a solid disc brake rotor with matching dimensions
Installation Notes and Tips
Verify rotor diameter, center hole size, bolt circle, and thickness against the removed part before installation. Clean the hub mounting surface thoroughly to help the rotor seat evenly, and inspect pads, calipers, and hardware condition during brake service. After installation, follow the vehicle manufacturer’s brake bedding procedure.
Quality Assurance
Centric positions the C-TEK Standard Disc Brake Rotors line as a value-focused replacement option for a wide range of applications, with attention to service life and everyday performance. Part number 121.36002 is built to the listed specifications for the confirmed Pontiac LeMans fitment.
