Centric 121.42038 Disc Brake Rotor - Front
Centric C-TEK Standard Disc Brake Rotor
The Centric C-TEK Standard Disc Brake Rotor, part number 121.42038, is built for drivers who need consistent braking performance and dependable service life. This vented rotor uses a smooth surface and OE-style dimensions for a direct replacement on the listed applications.
Centric’s C-TEK Standard Disc Brake Rotors line focuses on practical value for everyday driving, combining application-specific fitment with a straightforward design that supports stable brake operation. If you are searching for a Centric 121.42038 rotor for a brake service or a rotor replacement on a compatible vehicle, this part is engineered to match the required size and mounting layout.
Key Features
- Part number 121.42038 for application-specific ordering
- Vented disc brake rotor with a smooth friction surface
- Outside diameter: 259.7 mm (10.224 in.)
- Nominal thickness: 26.0 mm (1.024 in.)
- Discard thickness: 24.0 mm (0.945 in.)
- Overall height: 57.0 mm (2.244 in.)
- 5-lug design with 114.3 mm bolt circle
- Center hole diameter: 84.3 mm
- Straight vane style and floating disc mounting
- No ABS tone ring included; bearings not included
Detailed Description
This Centric brake rotor is intended for vehicles that require a vented front or rear disc rotor with the listed dimensions and 5-lug mounting pattern. The smooth surface supports even pad contact during brake service, while the straight vane construction helps manage heat during repeated stops. For shoppers comparing Centric 121.42038 against OE-style replacements, the rotor’s size, center bore, and bolt circle are key identifiers for proper application matching.
Use this rotor when servicing brake pulsation, worn rotor surfaces, or thickness loss that has reached the discard specification. It is a practical choice for routine brake maintenance on select make/model applications, including searches for Centric 121.42038 brake rotor, Centric C-TEK Standard Disc Brake Rotors, and vehicle-specific rotor replacement terms.
This part cross-references Raybestos Brakes 96095R for the same application.
What It Helps Address
- Brake pulsation caused by rotor wear or uneven friction surfaces
- Reduced braking consistency from a rotor below nominal thickness
- Heat buildup during repeated stops in daily driving
- Noise or vibration related to worn disc brake components
- Brake service needs on compatible 5-lug vehicle applications
Installation Notes and Tips
Confirm outside diameter, center hole diameter, bolt circle, and thickness before installation. Inspect pads, calipers, and hub surfaces during brake service, and clean the hub face to help the rotor seat evenly. Always verify the vehicle’s required rotor style, including vented construction and mounting pattern, before ordering part number 121.42038.
For fitment-focused searches, this rotor is listed for compatible applications such as Fits 2006-2011 Honda Civic, front right. Always match the exact year, make, model, and position shown in the vehicle catalog before installation.
Quality Assurance
Centric manufactures the C-TEK Standard Disc Brake Rotors line for dependable everyday brake service, with application-specific dimensions and OE-style construction details that support proper fit and function on the listed vehicles.
Centric 121.42038 Disc Brake Rotor - Front
Centric C-TEK Standard Disc Brake Rotor
The Centric C-TEK Standard Disc Brake Rotor, part number 121.42038, is built for drivers who need consistent braking performance and dependable service life. This vented rotor uses a smooth surface and OE-style dimensions for a direct replacement on the listed applications.
Centric’s C-TEK Standard Disc Brake Rotors line focuses on practical value for everyday driving, combining application-specific fitment with a straightforward design that supports stable brake operation. If you are searching for a Centric 121.42038 rotor for a brake service or a rotor replacement on a compatible vehicle, this part is engineered to match the required size and mounting layout.
Key Features
- Part number 121.42038 for application-specific ordering
- Vented disc brake rotor with a smooth friction surface
- Outside diameter: 259.7 mm (10.224 in.)
- Nominal thickness: 26.0 mm (1.024 in.)
- Discard thickness: 24.0 mm (0.945 in.)
- Overall height: 57.0 mm (2.244 in.)
- 5-lug design with 114.3 mm bolt circle
- Center hole diameter: 84.3 mm
- Straight vane style and floating disc mounting
- No ABS tone ring included; bearings not included
Detailed Description
This Centric brake rotor is intended for vehicles that require a vented front or rear disc rotor with the listed dimensions and 5-lug mounting pattern. The smooth surface supports even pad contact during brake service, while the straight vane construction helps manage heat during repeated stops. For shoppers comparing Centric 121.42038 against OE-style replacements, the rotor’s size, center bore, and bolt circle are key identifiers for proper application matching.
Use this rotor when servicing brake pulsation, worn rotor surfaces, or thickness loss that has reached the discard specification. It is a practical choice for routine brake maintenance on select make/model applications, including searches for Centric 121.42038 brake rotor, Centric C-TEK Standard Disc Brake Rotors, and vehicle-specific rotor replacement terms.
This part cross-references Raybestos Brakes 96095R for the same application.
What It Helps Address
- Brake pulsation caused by rotor wear or uneven friction surfaces
- Reduced braking consistency from a rotor below nominal thickness
- Heat buildup during repeated stops in daily driving
- Noise or vibration related to worn disc brake components
- Brake service needs on compatible 5-lug vehicle applications
Installation Notes and Tips
Confirm outside diameter, center hole diameter, bolt circle, and thickness before installation. Inspect pads, calipers, and hub surfaces during brake service, and clean the hub face to help the rotor seat evenly. Always verify the vehicle’s required rotor style, including vented construction and mounting pattern, before ordering part number 121.42038.
For fitment-focused searches, this rotor is listed for compatible applications such as Fits 2006-2011 Honda Civic, front right. Always match the exact year, make, model, and position shown in the vehicle catalog before installation.
Quality Assurance
Centric manufactures the C-TEK Standard Disc Brake Rotors line for dependable everyday brake service, with application-specific dimensions and OE-style construction details that support proper fit and function on the listed vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric C-TEK Standard Disc Brake Rotor
The Centric C-TEK Standard Disc Brake Rotor, part number 121.42038, is built for drivers who need consistent braking performance and dependable service life. This vented rotor uses a smooth surface and OE-style dimensions for a direct replacement on the listed applications.
Centric’s C-TEK Standard Disc Brake Rotors line focuses on practical value for everyday driving, combining application-specific fitment with a straightforward design that supports stable brake operation. If you are searching for a Centric 121.42038 rotor for a brake service or a rotor replacement on a compatible vehicle, this part is engineered to match the required size and mounting layout.
Key Features
- Part number 121.42038 for application-specific ordering
- Vented disc brake rotor with a smooth friction surface
- Outside diameter: 259.7 mm (10.224 in.)
- Nominal thickness: 26.0 mm (1.024 in.)
- Discard thickness: 24.0 mm (0.945 in.)
- Overall height: 57.0 mm (2.244 in.)
- 5-lug design with 114.3 mm bolt circle
- Center hole diameter: 84.3 mm
- Straight vane style and floating disc mounting
- No ABS tone ring included; bearings not included
Detailed Description
This Centric brake rotor is intended for vehicles that require a vented front or rear disc rotor with the listed dimensions and 5-lug mounting pattern. The smooth surface supports even pad contact during brake service, while the straight vane construction helps manage heat during repeated stops. For shoppers comparing Centric 121.42038 against OE-style replacements, the rotor’s size, center bore, and bolt circle are key identifiers for proper application matching.
Use this rotor when servicing brake pulsation, worn rotor surfaces, or thickness loss that has reached the discard specification. It is a practical choice for routine brake maintenance on select make/model applications, including searches for Centric 121.42038 brake rotor, Centric C-TEK Standard Disc Brake Rotors, and vehicle-specific rotor replacement terms.
This part cross-references Raybestos Brakes 96095R for the same application.
What It Helps Address
- Brake pulsation caused by rotor wear or uneven friction surfaces
- Reduced braking consistency from a rotor below nominal thickness
- Heat buildup during repeated stops in daily driving
- Noise or vibration related to worn disc brake components
- Brake service needs on compatible 5-lug vehicle applications
Installation Notes and Tips
Confirm outside diameter, center hole diameter, bolt circle, and thickness before installation. Inspect pads, calipers, and hub surfaces during brake service, and clean the hub face to help the rotor seat evenly. Always verify the vehicle’s required rotor style, including vented construction and mounting pattern, before ordering part number 121.42038.
For fitment-focused searches, this rotor is listed for compatible applications such as Fits 2006-2011 Honda Civic, front right. Always match the exact year, make, model, and position shown in the vehicle catalog before installation.
Quality Assurance
Centric manufactures the C-TEK Standard Disc Brake Rotors line for dependable everyday brake service, with application-specific dimensions and OE-style construction details that support proper fit and function on the listed vehicles.
