Centric 121.43008 Disc Brake Rotor - Front
Centric C-TEK Front Brake Rotor
The Centric C-TEK Standard Disc Brake Rotor, part number 121.43008, is built for front brake service on select Chevrolet, Geo, and Isuzu applications. It combines a smooth surface with vented construction to support consistent braking performance and dependable service life.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for everyday brake service
- Part number 121.43008
- Front disc brake rotor with vented design
- Smooth surface type for brake pad contact
- Outside diameter: 230 mm (9.055 in.)
- Nominal thickness: 18.000 mm (0.709 in.)
- Discard thickness: 16.600 mm (0.654 in.)
- Center hole diameter: 57.000 mm (2.244 in.)
- 4-lug pattern with 100 mm bolt circle diameter
- Straight vane style and floating disc mounting
- ABS tone ring not included; bearings not included
Product Details
Centric’s C-TEK Standard Disc Brake Rotors line focuses on practical replacement value for a wide range of braking applications. This rotor is engineered for front axle use and matches the fitment requirements for 1987-1988 Chevrolet Spectrum, 1989 Geo Spectrum, 1987-1989 Isuzu I-Mark, and 1991-1993 Isuzu Stylus. The 121.43008 rotor uses a vented, straight-vane design to help manage heat during repeated stops, while the smooth friction surface supports even pad contact.
This part cross-references Raybestos Brakes 9969R and Bosch 96314 for the same application.
What It Helps Address
- Brake pulsation caused by worn or out-of-spec front rotors
- Reduced stopping consistency from heat-affected rotor surfaces
- Noise and vibration linked to uneven rotor wear
- Service replacement needs on Chevrolet Spectrum, Geo Spectrum, Isuzu I-Mark, and Isuzu Stylus front brakes
- Rotor thickness loss approaching discard limits
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake pulsation. Inspect pads, calipers, and hardware condition during service, and replace worn components as needed to restore proper braking performance. Always confirm front-position application and match the rotor to the vehicle listed in the fitment data.
Quality Assurance
Centric positions the C-TEK Standard Disc Brake Rotors line as a service-focused replacement option with attention to performance, service life, and value. Part number 121.43008 is built to meet the dimensional requirements listed above for the confirmed front fitments.
Centric 121.43008 Disc Brake Rotor - Front
Centric C-TEK Front Brake Rotor
The Centric C-TEK Standard Disc Brake Rotor, part number 121.43008, is built for front brake service on select Chevrolet, Geo, and Isuzu applications. It combines a smooth surface with vented construction to support consistent braking performance and dependable service life.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for everyday brake service
- Part number 121.43008
- Front disc brake rotor with vented design
- Smooth surface type for brake pad contact
- Outside diameter: 230 mm (9.055 in.)
- Nominal thickness: 18.000 mm (0.709 in.)
- Discard thickness: 16.600 mm (0.654 in.)
- Center hole diameter: 57.000 mm (2.244 in.)
- 4-lug pattern with 100 mm bolt circle diameter
- Straight vane style and floating disc mounting
- ABS tone ring not included; bearings not included
Product Details
Centric’s C-TEK Standard Disc Brake Rotors line focuses on practical replacement value for a wide range of braking applications. This rotor is engineered for front axle use and matches the fitment requirements for 1987-1988 Chevrolet Spectrum, 1989 Geo Spectrum, 1987-1989 Isuzu I-Mark, and 1991-1993 Isuzu Stylus. The 121.43008 rotor uses a vented, straight-vane design to help manage heat during repeated stops, while the smooth friction surface supports even pad contact.
This part cross-references Raybestos Brakes 9969R and Bosch 96314 for the same application.
What It Helps Address
- Brake pulsation caused by worn or out-of-spec front rotors
- Reduced stopping consistency from heat-affected rotor surfaces
- Noise and vibration linked to uneven rotor wear
- Service replacement needs on Chevrolet Spectrum, Geo Spectrum, Isuzu I-Mark, and Isuzu Stylus front brakes
- Rotor thickness loss approaching discard limits
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake pulsation. Inspect pads, calipers, and hardware condition during service, and replace worn components as needed to restore proper braking performance. Always confirm front-position application and match the rotor to the vehicle listed in the fitment data.
Quality Assurance
Centric positions the C-TEK Standard Disc Brake Rotors line as a service-focused replacement option with attention to performance, service life, and value. Part number 121.43008 is built to meet the dimensional requirements listed above for the confirmed front fitments.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric C-TEK Front Brake Rotor
The Centric C-TEK Standard Disc Brake Rotor, part number 121.43008, is built for front brake service on select Chevrolet, Geo, and Isuzu applications. It combines a smooth surface with vented construction to support consistent braking performance and dependable service life.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for everyday brake service
- Part number 121.43008
- Front disc brake rotor with vented design
- Smooth surface type for brake pad contact
- Outside diameter: 230 mm (9.055 in.)
- Nominal thickness: 18.000 mm (0.709 in.)
- Discard thickness: 16.600 mm (0.654 in.)
- Center hole diameter: 57.000 mm (2.244 in.)
- 4-lug pattern with 100 mm bolt circle diameter
- Straight vane style and floating disc mounting
- ABS tone ring not included; bearings not included
Product Details
Centric’s C-TEK Standard Disc Brake Rotors line focuses on practical replacement value for a wide range of braking applications. This rotor is engineered for front axle use and matches the fitment requirements for 1987-1988 Chevrolet Spectrum, 1989 Geo Spectrum, 1987-1989 Isuzu I-Mark, and 1991-1993 Isuzu Stylus. The 121.43008 rotor uses a vented, straight-vane design to help manage heat during repeated stops, while the smooth friction surface supports even pad contact.
This part cross-references Raybestos Brakes 9969R and Bosch 96314 for the same application.
What It Helps Address
- Brake pulsation caused by worn or out-of-spec front rotors
- Reduced stopping consistency from heat-affected rotor surfaces
- Noise and vibration linked to uneven rotor wear
- Service replacement needs on Chevrolet Spectrum, Geo Spectrum, Isuzu I-Mark, and Isuzu Stylus front brakes
- Rotor thickness loss approaching discard limits
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake pulsation. Inspect pads, calipers, and hardware condition during service, and replace worn components as needed to restore proper braking performance. Always confirm front-position application and match the rotor to the vehicle listed in the fitment data.
Quality Assurance
Centric positions the C-TEK Standard Disc Brake Rotors line as a service-focused replacement option with attention to performance, service life, and value. Part number 121.43008 is built to meet the dimensional requirements listed above for the confirmed front fitments.
