Centric 121.49006 Disc Brake Rotor - Front
Centric C-TEK Standard Disc Brake Rotor
The Centric C-TEK Standard Disc Brake Rotor, part number 121.49006, is built for drivers who need consistent braking performance and dependable service life in a wide range of applications. This vented, smooth-surface rotor is engineered for direct replacement use where OE-style dimensions and fit are required.
Compatible With select 4-lug applications such as Honda Civic and similar compact vehicle brake setups, this rotor measures 256.000 mm outside diameter with a 24.000 mm nominal thickness and 22.000 mm discard thickness. The floating disc mounting, straight vane design, and 100.000 mm bolt circle support stable operation and heat management in everyday driving.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for OE-style replacement needs
- Part number 121.49006 for easy catalog matching
- Vented rotor construction for improved heat dissipation
- Smooth surface finish for standard brake pad bedding
- 4-lug pattern with 100.000 mm bolt circle diameter
- 256.000 mm outside diameter, 24.000 mm nominal thickness
- Straight vane design and floating disc mounting
- No ABS tone ring included
Product Details
The C-TEK Standard Disc Brake Rotors line is positioned for everyday service where value, fit, and predictable braking feel matter. Centric 121.49006 follows common OE-style rotor dimensions, including a 59.000 mm center hole diameter, 47.000 mm overall height, and 13.200 mm lug hole diameter. This makes it a practical choice for brake service on vehicles that use a vented front rotor design, including Honda Civic brake rotor replacement searches and other 4-lug compact car applications. If you are sourcing Centric 121.49006 for a Honda Civic or similar vehicle, the rotor’s smooth face and vented construction support normal street use and routine maintenance.
Common Problems This Rotor Can Address
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking consistency from heat-affected rotor surfaces
- Noise and uneven pad contact from damaged rotor faces
- Service replacement needs for vented front disc brake systems
- Fitment issues when matching OE-style dimensions on 4-lug vehicles
Installation Notes and Tips
Verify rotor dimensions, hub fit, bolt circle, and center bore before installation. Clean the hub mounting surface thoroughly to reduce runout concerns, and inspect pads, calipers, and hardware condition during brake service. Proper pad bedding after installation helps establish even transfer on the rotor face. This part cross-references Gates 31282 for the same application.
Quality Assurance
Centric markets the C-TEK Standard Disc Brake Rotors line for solid performance, service life, and value across a broad range of brake applications. Part number 121.49006 is built to meet standard replacement expectations for routine brake maintenance.
Centric 121.49006 Disc Brake Rotor - Front
Centric C-TEK Standard Disc Brake Rotor
The Centric C-TEK Standard Disc Brake Rotor, part number 121.49006, is built for drivers who need consistent braking performance and dependable service life in a wide range of applications. This vented, smooth-surface rotor is engineered for direct replacement use where OE-style dimensions and fit are required.
Compatible With select 4-lug applications such as Honda Civic and similar compact vehicle brake setups, this rotor measures 256.000 mm outside diameter with a 24.000 mm nominal thickness and 22.000 mm discard thickness. The floating disc mounting, straight vane design, and 100.000 mm bolt circle support stable operation and heat management in everyday driving.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for OE-style replacement needs
- Part number 121.49006 for easy catalog matching
- Vented rotor construction for improved heat dissipation
- Smooth surface finish for standard brake pad bedding
- 4-lug pattern with 100.000 mm bolt circle diameter
- 256.000 mm outside diameter, 24.000 mm nominal thickness
- Straight vane design and floating disc mounting
- No ABS tone ring included
Product Details
The C-TEK Standard Disc Brake Rotors line is positioned for everyday service where value, fit, and predictable braking feel matter. Centric 121.49006 follows common OE-style rotor dimensions, including a 59.000 mm center hole diameter, 47.000 mm overall height, and 13.200 mm lug hole diameter. This makes it a practical choice for brake service on vehicles that use a vented front rotor design, including Honda Civic brake rotor replacement searches and other 4-lug compact car applications. If you are sourcing Centric 121.49006 for a Honda Civic or similar vehicle, the rotor’s smooth face and vented construction support normal street use and routine maintenance.
Common Problems This Rotor Can Address
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking consistency from heat-affected rotor surfaces
- Noise and uneven pad contact from damaged rotor faces
- Service replacement needs for vented front disc brake systems
- Fitment issues when matching OE-style dimensions on 4-lug vehicles
Installation Notes and Tips
Verify rotor dimensions, hub fit, bolt circle, and center bore before installation. Clean the hub mounting surface thoroughly to reduce runout concerns, and inspect pads, calipers, and hardware condition during brake service. Proper pad bedding after installation helps establish even transfer on the rotor face. This part cross-references Gates 31282 for the same application.
Quality Assurance
Centric markets the C-TEK Standard Disc Brake Rotors line for solid performance, service life, and value across a broad range of brake applications. Part number 121.49006 is built to meet standard replacement expectations for routine brake maintenance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric C-TEK Standard Disc Brake Rotor
The Centric C-TEK Standard Disc Brake Rotor, part number 121.49006, is built for drivers who need consistent braking performance and dependable service life in a wide range of applications. This vented, smooth-surface rotor is engineered for direct replacement use where OE-style dimensions and fit are required.
Compatible With select 4-lug applications such as Honda Civic and similar compact vehicle brake setups, this rotor measures 256.000 mm outside diameter with a 24.000 mm nominal thickness and 22.000 mm discard thickness. The floating disc mounting, straight vane design, and 100.000 mm bolt circle support stable operation and heat management in everyday driving.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for OE-style replacement needs
- Part number 121.49006 for easy catalog matching
- Vented rotor construction for improved heat dissipation
- Smooth surface finish for standard brake pad bedding
- 4-lug pattern with 100.000 mm bolt circle diameter
- 256.000 mm outside diameter, 24.000 mm nominal thickness
- Straight vane design and floating disc mounting
- No ABS tone ring included
Product Details
The C-TEK Standard Disc Brake Rotors line is positioned for everyday service where value, fit, and predictable braking feel matter. Centric 121.49006 follows common OE-style rotor dimensions, including a 59.000 mm center hole diameter, 47.000 mm overall height, and 13.200 mm lug hole diameter. This makes it a practical choice for brake service on vehicles that use a vented front rotor design, including Honda Civic brake rotor replacement searches and other 4-lug compact car applications. If you are sourcing Centric 121.49006 for a Honda Civic or similar vehicle, the rotor’s smooth face and vented construction support normal street use and routine maintenance.
Common Problems This Rotor Can Address
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking consistency from heat-affected rotor surfaces
- Noise and uneven pad contact from damaged rotor faces
- Service replacement needs for vented front disc brake systems
- Fitment issues when matching OE-style dimensions on 4-lug vehicles
Installation Notes and Tips
Verify rotor dimensions, hub fit, bolt circle, and center bore before installation. Clean the hub mounting surface thoroughly to reduce runout concerns, and inspect pads, calipers, and hardware condition during brake service. Proper pad bedding after installation helps establish even transfer on the rotor face. This part cross-references Gates 31282 for the same application.
Quality Assurance
Centric markets the C-TEK Standard Disc Brake Rotors line for solid performance, service life, and value across a broad range of brake applications. Part number 121.49006 is built to meet standard replacement expectations for routine brake maintenance.
