Centric 121.65129 Disc Brake Rotor - Front
Centric C-TEK Front Disc Brake Rotor for Ford F-150
The Centric C-TEK Standard Disc Brake Rotor, part number 121.65129, is built for front brake service on select Ford F-150 and Lincoln Mark LT applications. It combines a vented rotor design with a smooth surface and integrated ABS tone ring for a direct-fit replacement focused on consistent braking performance and service life.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for everyday brake service
- Front disc brake rotor for 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT
- Vented rotor construction with straight vanes for heat management
- Smooth friction surface for rotor replacement service
- ABS tone ring included
- Hub & rotor kit configuration with hub-mounted installation design
- Outside diameter: 12.992 in. (330.000 mm)
- Nominal thickness: 1.181 in. (30.000 mm)
- Discard thickness: 1.122 in. (28.500 mm)
- Center hole diameter: 3.413 in. (86.700 mm)
- 7-lug bolt pattern with 150.000 mm bolt circle diameter
Product Details
Centric’s C-TEK Standard Disc Brake Rotors are positioned for service life and value across a wide range of brake repair needs. This rotor uses a vented, straight-vane design and a smooth surface to support stable front brake operation, while the included ABS tone ring helps maintain proper wheel speed signal function on the listed applications. Part number 121.65129 is specified as a hub and rotor kit and is listed for 7-lug front brake setups on the Ford F-150 and Lincoln Mark LT.
This part cross-references Raybestos Brakes 680179R for the same application.
What It Helps Address
- Front brake pulsation caused by worn or out-of-spec rotors
- Brake noise related to rotor surface wear
- Reduced braking consistency from heat-affected rotor surfaces
- ABS tone ring service needs on the listed front applications
- Replacement of a front rotor on 7-lug Ford F-150 and Lincoln Mark LT models
Installation Notes and Tips
Fits 2004-2008 Ford F-150, front. Fits 2006-2008 Lincoln Mark LT, front. The fitment notes specify a 7-lug upgrade kit application, separate hub and rotor design, and that the spindle nut should be replaced; use 124.65901. Confirm the 7-lug hub and rotor configuration, bolt circle, and bearing requirements before installation. Bearings are not included.
Quality Assurance
Centric markets the C-TEK Standard Disc Brake Rotors line for dependable performance, service life, and value in routine brake repair. Part number 121.65129 is built to match the listed dimensions and application details for the Ford F-150 and Lincoln Mark LT front brake setup.
Centric 121.65129 Disc Brake Rotor - Front
Centric C-TEK Front Disc Brake Rotor for Ford F-150
The Centric C-TEK Standard Disc Brake Rotor, part number 121.65129, is built for front brake service on select Ford F-150 and Lincoln Mark LT applications. It combines a vented rotor design with a smooth surface and integrated ABS tone ring for a direct-fit replacement focused on consistent braking performance and service life.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for everyday brake service
- Front disc brake rotor for 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT
- Vented rotor construction with straight vanes for heat management
- Smooth friction surface for rotor replacement service
- ABS tone ring included
- Hub & rotor kit configuration with hub-mounted installation design
- Outside diameter: 12.992 in. (330.000 mm)
- Nominal thickness: 1.181 in. (30.000 mm)
- Discard thickness: 1.122 in. (28.500 mm)
- Center hole diameter: 3.413 in. (86.700 mm)
- 7-lug bolt pattern with 150.000 mm bolt circle diameter
Product Details
Centric’s C-TEK Standard Disc Brake Rotors are positioned for service life and value across a wide range of brake repair needs. This rotor uses a vented, straight-vane design and a smooth surface to support stable front brake operation, while the included ABS tone ring helps maintain proper wheel speed signal function on the listed applications. Part number 121.65129 is specified as a hub and rotor kit and is listed for 7-lug front brake setups on the Ford F-150 and Lincoln Mark LT.
This part cross-references Raybestos Brakes 680179R for the same application.
What It Helps Address
- Front brake pulsation caused by worn or out-of-spec rotors
- Brake noise related to rotor surface wear
- Reduced braking consistency from heat-affected rotor surfaces
- ABS tone ring service needs on the listed front applications
- Replacement of a front rotor on 7-lug Ford F-150 and Lincoln Mark LT models
Installation Notes and Tips
Fits 2004-2008 Ford F-150, front. Fits 2006-2008 Lincoln Mark LT, front. The fitment notes specify a 7-lug upgrade kit application, separate hub and rotor design, and that the spindle nut should be replaced; use 124.65901. Confirm the 7-lug hub and rotor configuration, bolt circle, and bearing requirements before installation. Bearings are not included.
Quality Assurance
Centric markets the C-TEK Standard Disc Brake Rotors line for dependable performance, service life, and value in routine brake repair. Part number 121.65129 is built to match the listed dimensions and application details for the Ford F-150 and Lincoln Mark LT front brake setup.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric C-TEK Front Disc Brake Rotor for Ford F-150
The Centric C-TEK Standard Disc Brake Rotor, part number 121.65129, is built for front brake service on select Ford F-150 and Lincoln Mark LT applications. It combines a vented rotor design with a smooth surface and integrated ABS tone ring for a direct-fit replacement focused on consistent braking performance and service life.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for everyday brake service
- Front disc brake rotor for 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT
- Vented rotor construction with straight vanes for heat management
- Smooth friction surface for rotor replacement service
- ABS tone ring included
- Hub & rotor kit configuration with hub-mounted installation design
- Outside diameter: 12.992 in. (330.000 mm)
- Nominal thickness: 1.181 in. (30.000 mm)
- Discard thickness: 1.122 in. (28.500 mm)
- Center hole diameter: 3.413 in. (86.700 mm)
- 7-lug bolt pattern with 150.000 mm bolt circle diameter
Product Details
Centric’s C-TEK Standard Disc Brake Rotors are positioned for service life and value across a wide range of brake repair needs. This rotor uses a vented, straight-vane design and a smooth surface to support stable front brake operation, while the included ABS tone ring helps maintain proper wheel speed signal function on the listed applications. Part number 121.65129 is specified as a hub and rotor kit and is listed for 7-lug front brake setups on the Ford F-150 and Lincoln Mark LT.
This part cross-references Raybestos Brakes 680179R for the same application.
What It Helps Address
- Front brake pulsation caused by worn or out-of-spec rotors
- Brake noise related to rotor surface wear
- Reduced braking consistency from heat-affected rotor surfaces
- ABS tone ring service needs on the listed front applications
- Replacement of a front rotor on 7-lug Ford F-150 and Lincoln Mark LT models
Installation Notes and Tips
Fits 2004-2008 Ford F-150, front. Fits 2006-2008 Lincoln Mark LT, front. The fitment notes specify a 7-lug upgrade kit application, separate hub and rotor design, and that the spindle nut should be replaced; use 124.65901. Confirm the 7-lug hub and rotor configuration, bolt circle, and bearing requirements before installation. Bearings are not included.
Quality Assurance
Centric markets the C-TEK Standard Disc Brake Rotors line for dependable performance, service life, and value in routine brake repair. Part number 121.65129 is built to match the listed dimensions and application details for the Ford F-150 and Lincoln Mark LT front brake setup.
