Centric 121.99105 Disc Brake Rotor - Front
Centric C-TEK Front Brake Rotor for Volkswagen Up!
The Centric C-TEK Standard Disc Brake Rotor, part number 121.99105, is built for front brake service on the 2016-2018 Volkswagen Up! with 156mm fitment. It combines a smooth surface with vented construction to support consistent braking performance and dependable service life.
Centric’s C-TEK Standard Disc Brake Rotors line focuses on practical OE-style replacement value for everyday driving. This rotor is a straightforward choice for Volkswagen Up! front brake repair when you need a direct-fit disc brake rotor with the correct dimensions and mounting pattern.
Key Features
- Part number 121.99105
- Fits 2016-2018 Volkswagen Up!, front
- Vented disc brake rotor design
- Smooth surface type
- Outside diameter: 236.000 mm / 9.291 in
- Nominal thickness: 22.000 mm / 0.866 in
- Discard thickness: 19.000 mm / 0.748 in
- 4-lug pattern with 100.000 mm bolt circle diameter
- Center hole diameter: 65.000 mm / 2.559 in
- ABS tone ring not included
Detailed Description
This Centric brake rotor is engineered for front axle use on the Volkswagen Up! and matches the listed fitment for 2016, 2017, and 2018 models. The vented rotor construction helps manage heat during repeated stops, while the smooth friction surface supports even pad contact during brake service. With a 236 mm outside diameter, 22 mm nominal thickness, and 4-lug 100 mm bolt circle, this rotor is specified for the correct front brake application on the Up!.
This part cross-references OE-style numbers 1S0615301E and 47098 for the same application. The Centric C-TEK Standard Disc Brake Rotors line is positioned for drivers who want a replacement rotor that balances service life and value without unnecessary complexity. Part number 121.99105 is a direct reference to keep ordering and verification simple.
Common Brake Issues It Can Address
- Brake pulsation caused by worn or uneven rotor surfaces
- Reduced stopping consistency from rotor wear beyond discard thickness
- Heat buildup during repeated front brake use
- Noise or vibration related to rotor condition
- Front brake service needs on a Volkswagen Up! with the listed fitment
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake vibration. Inspect pads, caliper hardware, and wheel bearings during service, and replace worn brake pads at the same time if needed. Confirm the rotor is installed on the front position only for the listed Volkswagen Up! applications.
Quality Assurance
Centric manufactures the C-TEK Standard Disc Brake Rotors line for dependable everyday brake service, with attention to fit, thickness, and application-specific dimensions. This rotor is built to meet the requirements of the listed Volkswagen Up! front brake application.
Centric 121.99105 Disc Brake Rotor - Front
Centric C-TEK Front Brake Rotor for Volkswagen Up!
The Centric C-TEK Standard Disc Brake Rotor, part number 121.99105, is built for front brake service on the 2016-2018 Volkswagen Up! with 156mm fitment. It combines a smooth surface with vented construction to support consistent braking performance and dependable service life.
Centric’s C-TEK Standard Disc Brake Rotors line focuses on practical OE-style replacement value for everyday driving. This rotor is a straightforward choice for Volkswagen Up! front brake repair when you need a direct-fit disc brake rotor with the correct dimensions and mounting pattern.
Key Features
- Part number 121.99105
- Fits 2016-2018 Volkswagen Up!, front
- Vented disc brake rotor design
- Smooth surface type
- Outside diameter: 236.000 mm / 9.291 in
- Nominal thickness: 22.000 mm / 0.866 in
- Discard thickness: 19.000 mm / 0.748 in
- 4-lug pattern with 100.000 mm bolt circle diameter
- Center hole diameter: 65.000 mm / 2.559 in
- ABS tone ring not included
Detailed Description
This Centric brake rotor is engineered for front axle use on the Volkswagen Up! and matches the listed fitment for 2016, 2017, and 2018 models. The vented rotor construction helps manage heat during repeated stops, while the smooth friction surface supports even pad contact during brake service. With a 236 mm outside diameter, 22 mm nominal thickness, and 4-lug 100 mm bolt circle, this rotor is specified for the correct front brake application on the Up!.
This part cross-references OE-style numbers 1S0615301E and 47098 for the same application. The Centric C-TEK Standard Disc Brake Rotors line is positioned for drivers who want a replacement rotor that balances service life and value without unnecessary complexity. Part number 121.99105 is a direct reference to keep ordering and verification simple.
Common Brake Issues It Can Address
- Brake pulsation caused by worn or uneven rotor surfaces
- Reduced stopping consistency from rotor wear beyond discard thickness
- Heat buildup during repeated front brake use
- Noise or vibration related to rotor condition
- Front brake service needs on a Volkswagen Up! with the listed fitment
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake vibration. Inspect pads, caliper hardware, and wheel bearings during service, and replace worn brake pads at the same time if needed. Confirm the rotor is installed on the front position only for the listed Volkswagen Up! applications.
Quality Assurance
Centric manufactures the C-TEK Standard Disc Brake Rotors line for dependable everyday brake service, with attention to fit, thickness, and application-specific dimensions. This rotor is built to meet the requirements of the listed Volkswagen Up! front brake application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric C-TEK Front Brake Rotor for Volkswagen Up!
The Centric C-TEK Standard Disc Brake Rotor, part number 121.99105, is built for front brake service on the 2016-2018 Volkswagen Up! with 156mm fitment. It combines a smooth surface with vented construction to support consistent braking performance and dependable service life.
Centric’s C-TEK Standard Disc Brake Rotors line focuses on practical OE-style replacement value for everyday driving. This rotor is a straightforward choice for Volkswagen Up! front brake repair when you need a direct-fit disc brake rotor with the correct dimensions and mounting pattern.
Key Features
- Part number 121.99105
- Fits 2016-2018 Volkswagen Up!, front
- Vented disc brake rotor design
- Smooth surface type
- Outside diameter: 236.000 mm / 9.291 in
- Nominal thickness: 22.000 mm / 0.866 in
- Discard thickness: 19.000 mm / 0.748 in
- 4-lug pattern with 100.000 mm bolt circle diameter
- Center hole diameter: 65.000 mm / 2.559 in
- ABS tone ring not included
Detailed Description
This Centric brake rotor is engineered for front axle use on the Volkswagen Up! and matches the listed fitment for 2016, 2017, and 2018 models. The vented rotor construction helps manage heat during repeated stops, while the smooth friction surface supports even pad contact during brake service. With a 236 mm outside diameter, 22 mm nominal thickness, and 4-lug 100 mm bolt circle, this rotor is specified for the correct front brake application on the Up!.
This part cross-references OE-style numbers 1S0615301E and 47098 for the same application. The Centric C-TEK Standard Disc Brake Rotors line is positioned for drivers who want a replacement rotor that balances service life and value without unnecessary complexity. Part number 121.99105 is a direct reference to keep ordering and verification simple.
Common Brake Issues It Can Address
- Brake pulsation caused by worn or uneven rotor surfaces
- Reduced stopping consistency from rotor wear beyond discard thickness
- Heat buildup during repeated front brake use
- Noise or vibration related to rotor condition
- Front brake service needs on a Volkswagen Up! with the listed fitment
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake vibration. Inspect pads, caliper hardware, and wheel bearings during service, and replace worn brake pads at the same time if needed. Confirm the rotor is installed on the front position only for the listed Volkswagen Up! applications.
Quality Assurance
Centric manufactures the C-TEK Standard Disc Brake Rotors line for dependable everyday brake service, with attention to fit, thickness, and application-specific dimensions. This rotor is built to meet the requirements of the listed Volkswagen Up! front brake application.
