Centric 123.46026 Brake Drum - Rear
Rear Brake Drum for Mitsubishi Mirage
Centric C-TEK Standard Brake Drum 123.46026 is a rear drum brake replacement for 2014-2019 Mitsubishi Mirage models. It is built to match key OE-style dimensions for the Mirage rear brake setup, including a 7.083 in nominal drum diameter, 8.402 in outside diameter, and 3.177 in overall height.
The C-TEK Standard Brake Drums line is positioned as a practical replacement range from Centric, offering many of the features found in premium replacement brake parts. For shoppers searching for a rear brake drum for 2014-2019 Mitsubishi Mirage, Centric 123.46026 provides a direct-fit option with hub-and-drum mounting and a 4-bolt pattern.
- Fits 2014-2019 Mitsubishi Mirage, rear
- Centric C-TEK Standard Brake Drums product line
- Nominal drum diameter: 7.083 in (179.9 mm)
- Maximum brake diameter discard: 7.126 in (181.0 mm)
- Outside diameter: 8.402 in (213.4 mm)
- 4-bolt pattern with 3.937 in (100 mm) bolt circle diameter
- Hub hole/register: 2.193 in (55.7 mm)
- Friction surface width: 1.276 in (32.4 mm)
- Stud thread size: 12 x 1.50
- Outer cooling fins: No
Centric 123.46026 is a brake drum for the rear axle of the Mitsubishi Mirage, engineered around the listed dimensions to support proper shoe contact, drum fitment, and brake balance. This part cross-references Gates 24268 for the same application. If you are replacing a worn rear brake drum on a 2014-2019 Mitsubishi Mirage, this part number helps simplify matching by size and vehicle application.
Common Problems This Part Can Address
- Rear brake pulsation caused by drum wear or out-of-round condition
- Reduced braking performance from a worn friction surface
- Brake shoe contact issues related to excessive drum diameter
- Noise from a damaged or heat-affected rear drum
- Fitment problems when replacing a drum with incorrect hub or bolt pattern dimensions
Installation Notes and Tips
Before installation, verify the drum diameter, bolt circle, hub register, and stud thread specifications against the vehicle and the removed part. Inspect rear brake shoes, wheel cylinders, and hardware for wear before installing the new drum. Clean the friction surface and confirm the drum is within the maximum discard diameter before use.
Quality Assurance
Centric’s C-TEK Standard Brake Drums are part of a replacement line that mirrors many premium brake part features and benefits, with dimensions listed for accurate application matching. Part number 123.46026 is cataloged for 2014-2019 Mitsubishi Mirage rear brake service.
Centric 123.46026 Brake Drum - Rear
Rear Brake Drum for Mitsubishi Mirage
Centric C-TEK Standard Brake Drum 123.46026 is a rear drum brake replacement for 2014-2019 Mitsubishi Mirage models. It is built to match key OE-style dimensions for the Mirage rear brake setup, including a 7.083 in nominal drum diameter, 8.402 in outside diameter, and 3.177 in overall height.
The C-TEK Standard Brake Drums line is positioned as a practical replacement range from Centric, offering many of the features found in premium replacement brake parts. For shoppers searching for a rear brake drum for 2014-2019 Mitsubishi Mirage, Centric 123.46026 provides a direct-fit option with hub-and-drum mounting and a 4-bolt pattern.
- Fits 2014-2019 Mitsubishi Mirage, rear
- Centric C-TEK Standard Brake Drums product line
- Nominal drum diameter: 7.083 in (179.9 mm)
- Maximum brake diameter discard: 7.126 in (181.0 mm)
- Outside diameter: 8.402 in (213.4 mm)
- 4-bolt pattern with 3.937 in (100 mm) bolt circle diameter
- Hub hole/register: 2.193 in (55.7 mm)
- Friction surface width: 1.276 in (32.4 mm)
- Stud thread size: 12 x 1.50
- Outer cooling fins: No
Centric 123.46026 is a brake drum for the rear axle of the Mitsubishi Mirage, engineered around the listed dimensions to support proper shoe contact, drum fitment, and brake balance. This part cross-references Gates 24268 for the same application. If you are replacing a worn rear brake drum on a 2014-2019 Mitsubishi Mirage, this part number helps simplify matching by size and vehicle application.
Common Problems This Part Can Address
- Rear brake pulsation caused by drum wear or out-of-round condition
- Reduced braking performance from a worn friction surface
- Brake shoe contact issues related to excessive drum diameter
- Noise from a damaged or heat-affected rear drum
- Fitment problems when replacing a drum with incorrect hub or bolt pattern dimensions
Installation Notes and Tips
Before installation, verify the drum diameter, bolt circle, hub register, and stud thread specifications against the vehicle and the removed part. Inspect rear brake shoes, wheel cylinders, and hardware for wear before installing the new drum. Clean the friction surface and confirm the drum is within the maximum discard diameter before use.
Quality Assurance
Centric’s C-TEK Standard Brake Drums are part of a replacement line that mirrors many premium brake part features and benefits, with dimensions listed for accurate application matching. Part number 123.46026 is cataloged for 2014-2019 Mitsubishi Mirage rear brake service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Drum for Mitsubishi Mirage
Centric C-TEK Standard Brake Drum 123.46026 is a rear drum brake replacement for 2014-2019 Mitsubishi Mirage models. It is built to match key OE-style dimensions for the Mirage rear brake setup, including a 7.083 in nominal drum diameter, 8.402 in outside diameter, and 3.177 in overall height.
The C-TEK Standard Brake Drums line is positioned as a practical replacement range from Centric, offering many of the features found in premium replacement brake parts. For shoppers searching for a rear brake drum for 2014-2019 Mitsubishi Mirage, Centric 123.46026 provides a direct-fit option with hub-and-drum mounting and a 4-bolt pattern.
- Fits 2014-2019 Mitsubishi Mirage, rear
- Centric C-TEK Standard Brake Drums product line
- Nominal drum diameter: 7.083 in (179.9 mm)
- Maximum brake diameter discard: 7.126 in (181.0 mm)
- Outside diameter: 8.402 in (213.4 mm)
- 4-bolt pattern with 3.937 in (100 mm) bolt circle diameter
- Hub hole/register: 2.193 in (55.7 mm)
- Friction surface width: 1.276 in (32.4 mm)
- Stud thread size: 12 x 1.50
- Outer cooling fins: No
Centric 123.46026 is a brake drum for the rear axle of the Mitsubishi Mirage, engineered around the listed dimensions to support proper shoe contact, drum fitment, and brake balance. This part cross-references Gates 24268 for the same application. If you are replacing a worn rear brake drum on a 2014-2019 Mitsubishi Mirage, this part number helps simplify matching by size and vehicle application.
Common Problems This Part Can Address
- Rear brake pulsation caused by drum wear or out-of-round condition
- Reduced braking performance from a worn friction surface
- Brake shoe contact issues related to excessive drum diameter
- Noise from a damaged or heat-affected rear drum
- Fitment problems when replacing a drum with incorrect hub or bolt pattern dimensions
Installation Notes and Tips
Before installation, verify the drum diameter, bolt circle, hub register, and stud thread specifications against the vehicle and the removed part. Inspect rear brake shoes, wheel cylinders, and hardware for wear before installing the new drum. Clean the friction surface and confirm the drum is within the maximum discard diameter before use.
Quality Assurance
Centric’s C-TEK Standard Brake Drums are part of a replacement line that mirrors many premium brake part features and benefits, with dimensions listed for accurate application matching. Part number 123.46026 is cataloged for 2014-2019 Mitsubishi Mirage rear brake service.
