Centric 125.33089 Disc Brake Rotor - Rear
Centric Premium Rear Brake Rotor for Audi Allroad Quattro
Centric 125 Series High Carbon Alloy Disc Brake Rotors are built for consistent braking performance, reduced noise, and improved resistance to heat-related cracking. This Centric 125 Series rotor, part number 125.33089, is a rear brake rotor application for the 2004-2005 Audi Allroad Quattro with a 4 pad front caliper setup.
Key Features
- High carbon alloy metallurgy helps reduce pad squeal with higher-friction European brake pad compounds
- Molybdenum and chromium content improves resistance to cracking during repeated stops and performance use
- Increased carbon and chromium content supports better oxidation resistance
- Vented rotor design helps manage heat during braking
- Smooth surface type supports even pad contact
- Coated hat finish helps protect non-friction surfaces
- 5-bolt hole pattern with 112 mm mounting bolt circle diameter
- Outside diameter: 269 mm; nominal thickness: 22 mm; discard thickness: 20 mm
Product Details
Centric Premium High Carbon Alloy Disc Brake Rotors are engineered for drivers who want stable pedal feel and dependable stopping performance from a rear brake rotor. The 125 Series uses an advanced alloy blend that improves friction characteristics and helps reduce the chance of rotor cracking under repeated stop-and-go use. For 2004-2005 Audi Allroad Quattro rear brake service, part number 125.33089 provides the correct dimensions and vented construction for this application. This part cross-references Raybestos Brakes 980024R for the same application.
What This Rotor Helps Address
- Brake squeal caused by aggressive or European-style pad compounds
- Rotor cracking from repeated high-heat braking events
- Reduced braking consistency during frequent stop-and-go driving
- Surface oxidation on exposed rotor areas
- Uneven rear brake performance from worn or heat-stressed rotors
Installation Notes and Tips
Fits 2004-2005 Audi Allroad Quattro, rear. Verify rotor dimensions, hub fitment, and caliper clearance before installation. Clean the hub mounting surface thoroughly and inspect pads, caliper hardware, and wheel bearings during brake service. Proper bedding-in of new pads and rotors helps establish even transfer film and stable braking performance. Part number 125.33089 should be matched to the vehicle’s rear brake specification before installation.
Quality Assurance
Centric’s 125 Series High Carbon Alloy line focuses on metallurgy, dimensional accuracy, and corrosion resistance for brake service applications. The coated hat finish and alloy composition support long-term durability in demanding driving conditions.
Centric 125.33089 Disc Brake Rotor - Rear
Centric Premium Rear Brake Rotor for Audi Allroad Quattro
Centric 125 Series High Carbon Alloy Disc Brake Rotors are built for consistent braking performance, reduced noise, and improved resistance to heat-related cracking. This Centric 125 Series rotor, part number 125.33089, is a rear brake rotor application for the 2004-2005 Audi Allroad Quattro with a 4 pad front caliper setup.
Key Features
- High carbon alloy metallurgy helps reduce pad squeal with higher-friction European brake pad compounds
- Molybdenum and chromium content improves resistance to cracking during repeated stops and performance use
- Increased carbon and chromium content supports better oxidation resistance
- Vented rotor design helps manage heat during braking
- Smooth surface type supports even pad contact
- Coated hat finish helps protect non-friction surfaces
- 5-bolt hole pattern with 112 mm mounting bolt circle diameter
- Outside diameter: 269 mm; nominal thickness: 22 mm; discard thickness: 20 mm
Product Details
Centric Premium High Carbon Alloy Disc Brake Rotors are engineered for drivers who want stable pedal feel and dependable stopping performance from a rear brake rotor. The 125 Series uses an advanced alloy blend that improves friction characteristics and helps reduce the chance of rotor cracking under repeated stop-and-go use. For 2004-2005 Audi Allroad Quattro rear brake service, part number 125.33089 provides the correct dimensions and vented construction for this application. This part cross-references Raybestos Brakes 980024R for the same application.
What This Rotor Helps Address
- Brake squeal caused by aggressive or European-style pad compounds
- Rotor cracking from repeated high-heat braking events
- Reduced braking consistency during frequent stop-and-go driving
- Surface oxidation on exposed rotor areas
- Uneven rear brake performance from worn or heat-stressed rotors
Installation Notes and Tips
Fits 2004-2005 Audi Allroad Quattro, rear. Verify rotor dimensions, hub fitment, and caliper clearance before installation. Clean the hub mounting surface thoroughly and inspect pads, caliper hardware, and wheel bearings during brake service. Proper bedding-in of new pads and rotors helps establish even transfer film and stable braking performance. Part number 125.33089 should be matched to the vehicle’s rear brake specification before installation.
Quality Assurance
Centric’s 125 Series High Carbon Alloy line focuses on metallurgy, dimensional accuracy, and corrosion resistance for brake service applications. The coated hat finish and alloy composition support long-term durability in demanding driving conditions.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium Rear Brake Rotor for Audi Allroad Quattro
Centric 125 Series High Carbon Alloy Disc Brake Rotors are built for consistent braking performance, reduced noise, and improved resistance to heat-related cracking. This Centric 125 Series rotor, part number 125.33089, is a rear brake rotor application for the 2004-2005 Audi Allroad Quattro with a 4 pad front caliper setup.
Key Features
- High carbon alloy metallurgy helps reduce pad squeal with higher-friction European brake pad compounds
- Molybdenum and chromium content improves resistance to cracking during repeated stops and performance use
- Increased carbon and chromium content supports better oxidation resistance
- Vented rotor design helps manage heat during braking
- Smooth surface type supports even pad contact
- Coated hat finish helps protect non-friction surfaces
- 5-bolt hole pattern with 112 mm mounting bolt circle diameter
- Outside diameter: 269 mm; nominal thickness: 22 mm; discard thickness: 20 mm
Product Details
Centric Premium High Carbon Alloy Disc Brake Rotors are engineered for drivers who want stable pedal feel and dependable stopping performance from a rear brake rotor. The 125 Series uses an advanced alloy blend that improves friction characteristics and helps reduce the chance of rotor cracking under repeated stop-and-go use. For 2004-2005 Audi Allroad Quattro rear brake service, part number 125.33089 provides the correct dimensions and vented construction for this application. This part cross-references Raybestos Brakes 980024R for the same application.
What This Rotor Helps Address
- Brake squeal caused by aggressive or European-style pad compounds
- Rotor cracking from repeated high-heat braking events
- Reduced braking consistency during frequent stop-and-go driving
- Surface oxidation on exposed rotor areas
- Uneven rear brake performance from worn or heat-stressed rotors
Installation Notes and Tips
Fits 2004-2005 Audi Allroad Quattro, rear. Verify rotor dimensions, hub fitment, and caliper clearance before installation. Clean the hub mounting surface thoroughly and inspect pads, caliper hardware, and wheel bearings during brake service. Proper bedding-in of new pads and rotors helps establish even transfer film and stable braking performance. Part number 125.33089 should be matched to the vehicle’s rear brake specification before installation.
Quality Assurance
Centric’s 125 Series High Carbon Alloy line focuses on metallurgy, dimensional accuracy, and corrosion resistance for brake service applications. The coated hat finish and alloy composition support long-term durability in demanding driving conditions.
