Centric 125.33100 Disc Brake Rotor - Front
Centric Premium High Carbon Alloy Rotor
Centric 125 Series High Carbon Alloy Disc Brake Rotor, part number 125.33100, is built for front brake applications that demand stable stopping performance and consistent pedal feel. It is a vented, smooth-surface rotor with a coated hat finish and a 5-lug pattern for confirmed Audi A6 Quattro front fitment.
For drivers searching for a front brake rotor for 2005-2011 Audi A6 Quattro, this Centric Premium High Carbon Alloy Disc Brake Rotor combines OE-style dimensions with metallurgy aimed at reducing noise and improving durability under repeated stops.
Key Features
- Centric Premium High Carbon Alloy Disc Brake Rotors line
- Part number 125.33100
- Vented rotor design with smooth surface type
- High carbon alloy construction with molybdenum and chromium content
- Coated hat finish for added corrosion resistance
- 5 bolt hole pattern with floating disc mounting
- Pillar vane style for heat management
- Confirmed front fitment for Audi A6 Quattro applications
Product Details
The Centric 125 Series uses an advanced high carbon alloy metallurgy that helps reduce pad squeal, especially with higher-friction European brake pad compounds. Its molybdenum and chromium alloy content is used to improve resistance to cracking during repeated stop events and higher-load driving, while the increased carbon and chromium content adds oxidation resistance. The rotor measures 347 mm outside diameter, 29.9 mm nominal thickness, 28 mm discard thickness, and 59.5 mm overall height, with a 68 mm center hole diameter and 112.6 mm bolt circle diameter.
Fits 2005-2008 Audi A6 Quattro, front. Fits 2009-2011 Audi A6 Quattro, front, 347mm front disc; exc Armored. This part cross-references Raybestos Brakes 980501 and Febi-Bilstein 45437 for the same application.
Common Issues This Rotor Can Address
- Brake squeal with European-style pad compounds
- Rotor cracking during repeated hard stops
- Reduced braking consistency under higher thermal load
- Surface oxidation on exposed rotor areas
- Front brake vibration caused by worn or heat-stressed rotors
Installation Notes
Verify rotor diameter, center bore, bolt circle, and front axle application before installation. This rotor is a vented front disc brake rotor with floating mounting and a coated hat finish; confirm the vehicle uses the 347 mm front disc specification where noted. Inspect pads, calipers, and hub surfaces during service to help ensure proper rotor seating and even braking contact.
Quality Assurance
Centric Premium High Carbon Alloy Brake Rotors are engineered with alloy content and surface protection focused on durability, noise control, and corrosion resistance in demanding brake service. Part number 125.33100 is built to match the confirmed Audi A6 Quattro front applications listed above.
Centric 125.33100 Disc Brake Rotor - Front
Centric Premium High Carbon Alloy Rotor
Centric 125 Series High Carbon Alloy Disc Brake Rotor, part number 125.33100, is built for front brake applications that demand stable stopping performance and consistent pedal feel. It is a vented, smooth-surface rotor with a coated hat finish and a 5-lug pattern for confirmed Audi A6 Quattro front fitment.
For drivers searching for a front brake rotor for 2005-2011 Audi A6 Quattro, this Centric Premium High Carbon Alloy Disc Brake Rotor combines OE-style dimensions with metallurgy aimed at reducing noise and improving durability under repeated stops.
Key Features
- Centric Premium High Carbon Alloy Disc Brake Rotors line
- Part number 125.33100
- Vented rotor design with smooth surface type
- High carbon alloy construction with molybdenum and chromium content
- Coated hat finish for added corrosion resistance
- 5 bolt hole pattern with floating disc mounting
- Pillar vane style for heat management
- Confirmed front fitment for Audi A6 Quattro applications
Product Details
The Centric 125 Series uses an advanced high carbon alloy metallurgy that helps reduce pad squeal, especially with higher-friction European brake pad compounds. Its molybdenum and chromium alloy content is used to improve resistance to cracking during repeated stop events and higher-load driving, while the increased carbon and chromium content adds oxidation resistance. The rotor measures 347 mm outside diameter, 29.9 mm nominal thickness, 28 mm discard thickness, and 59.5 mm overall height, with a 68 mm center hole diameter and 112.6 mm bolt circle diameter.
Fits 2005-2008 Audi A6 Quattro, front. Fits 2009-2011 Audi A6 Quattro, front, 347mm front disc; exc Armored. This part cross-references Raybestos Brakes 980501 and Febi-Bilstein 45437 for the same application.
Common Issues This Rotor Can Address
- Brake squeal with European-style pad compounds
- Rotor cracking during repeated hard stops
- Reduced braking consistency under higher thermal load
- Surface oxidation on exposed rotor areas
- Front brake vibration caused by worn or heat-stressed rotors
Installation Notes
Verify rotor diameter, center bore, bolt circle, and front axle application before installation. This rotor is a vented front disc brake rotor with floating mounting and a coated hat finish; confirm the vehicle uses the 347 mm front disc specification where noted. Inspect pads, calipers, and hub surfaces during service to help ensure proper rotor seating and even braking contact.
Quality Assurance
Centric Premium High Carbon Alloy Brake Rotors are engineered with alloy content and surface protection focused on durability, noise control, and corrosion resistance in demanding brake service. Part number 125.33100 is built to match the confirmed Audi A6 Quattro front applications listed above.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium High Carbon Alloy Rotor
Centric 125 Series High Carbon Alloy Disc Brake Rotor, part number 125.33100, is built for front brake applications that demand stable stopping performance and consistent pedal feel. It is a vented, smooth-surface rotor with a coated hat finish and a 5-lug pattern for confirmed Audi A6 Quattro front fitment.
For drivers searching for a front brake rotor for 2005-2011 Audi A6 Quattro, this Centric Premium High Carbon Alloy Disc Brake Rotor combines OE-style dimensions with metallurgy aimed at reducing noise and improving durability under repeated stops.
Key Features
- Centric Premium High Carbon Alloy Disc Brake Rotors line
- Part number 125.33100
- Vented rotor design with smooth surface type
- High carbon alloy construction with molybdenum and chromium content
- Coated hat finish for added corrosion resistance
- 5 bolt hole pattern with floating disc mounting
- Pillar vane style for heat management
- Confirmed front fitment for Audi A6 Quattro applications
Product Details
The Centric 125 Series uses an advanced high carbon alloy metallurgy that helps reduce pad squeal, especially with higher-friction European brake pad compounds. Its molybdenum and chromium alloy content is used to improve resistance to cracking during repeated stop events and higher-load driving, while the increased carbon and chromium content adds oxidation resistance. The rotor measures 347 mm outside diameter, 29.9 mm nominal thickness, 28 mm discard thickness, and 59.5 mm overall height, with a 68 mm center hole diameter and 112.6 mm bolt circle diameter.
Fits 2005-2008 Audi A6 Quattro, front. Fits 2009-2011 Audi A6 Quattro, front, 347mm front disc; exc Armored. This part cross-references Raybestos Brakes 980501 and Febi-Bilstein 45437 for the same application.
Common Issues This Rotor Can Address
- Brake squeal with European-style pad compounds
- Rotor cracking during repeated hard stops
- Reduced braking consistency under higher thermal load
- Surface oxidation on exposed rotor areas
- Front brake vibration caused by worn or heat-stressed rotors
Installation Notes
Verify rotor diameter, center bore, bolt circle, and front axle application before installation. This rotor is a vented front disc brake rotor with floating mounting and a coated hat finish; confirm the vehicle uses the 347 mm front disc specification where noted. Inspect pads, calipers, and hub surfaces during service to help ensure proper rotor seating and even braking contact.
Quality Assurance
Centric Premium High Carbon Alloy Brake Rotors are engineered with alloy content and surface protection focused on durability, noise control, and corrosion resistance in demanding brake service. Part number 125.33100 is built to match the confirmed Audi A6 Quattro front applications listed above.
