Centric 125.33112 Disc Brake Rotor - Front
Centric Premium High Carbon Alloy Rotor
The Centric 125 Series High Carbon Alloy Disc Brake Rotor is built for front brake applications that demand stable stopping performance and consistent pedal feel. Part number 125.33112 is engineered with high-carbon metallurgy to help reduce brake noise and improve resistance to cracking under repeated hard stops.
Compatible With select Audi S3, Volkswagen Golf R, Volkswagen CC, Volkswagen Passat CC, Volkswagen Passat, and Volkswagen R32 front brake applications, this rotor uses a vented, smooth surface design with a coated hat finish for dependable service in everyday driving and performance-oriented use.
Key Features
- High-carbon alloy construction for improved thermal stability
- Proprietary molybdenum and chromium content helps resist cracking during repeated stop cycles
- Enhanced friction characteristics for stronger brake response
- Increased carbon and chromium content improves oxidation resistance
- Vented rotor design for front axle heat management
- Smooth surface type with coated hat finish
- 5-bolt hole pattern with 112 mm bolt circle and 65 mm center hole
- Outside diameter: 345 mm; nominal thickness: 29.9 mm; discard thickness: 27 mm
Product Details
Centric Premium High Carbon Alloy Disc Brake Rotors are part of the Centric 125 Series, a rotor line focused on metallurgy and dimensional consistency for demanding brake systems. The material blend is formulated to help reduce pad squeal, especially with higher-friction European-style brake pad compounds, while also improving resistance to heat-related stress and surface oxidation. For drivers servicing a Volkswagen Golf R front brake rotor or an Audi S3 front brake rotor, 125.33112 provides the size and construction needed for direct replacement service.
This part cross-references Raybestos Brakes 980471 and Gates 34308 for the same application.
What This Rotor Helps Address
- Brake squeal during normal or aggressive braking
- Rotor cracking from repeated high-performance stops
- Heat buildup in front brake service
- Surface oxidation on exposed rotor areas
- Reduced braking consistency from worn front rotors
Installation Notes
Verify rotor dimensions, hub bore, bolt pattern, and front axle fitment before installation. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition before replacing the rotor. For best results, pair the rotor with quality brake pads matched to the vehicle’s braking system and follow the vehicle manufacturer’s bedding procedure.
Fits 2012-2013 Volkswagen Golf R, front. Fits 2008-2012 Audi S3, front. Fits 2009-2011 Volkswagen CC, front. Fits 2009-2010 Volkswagen Passat CC, front. Fits 2008-2009 Volkswagen Passat, front. Fits 2008 Volkswagen R32, front. Fits 2006-2007 Volkswagen Passat, front 4Motion.
Quality Assurance
Centric designs the 125 Series with advanced alloy metallurgy and coated rotor surfaces to support durability, corrosion resistance, and stable braking performance in front brake applications.
Centric 125.33112 Disc Brake Rotor - Front
Centric Premium High Carbon Alloy Rotor
The Centric 125 Series High Carbon Alloy Disc Brake Rotor is built for front brake applications that demand stable stopping performance and consistent pedal feel. Part number 125.33112 is engineered with high-carbon metallurgy to help reduce brake noise and improve resistance to cracking under repeated hard stops.
Compatible With select Audi S3, Volkswagen Golf R, Volkswagen CC, Volkswagen Passat CC, Volkswagen Passat, and Volkswagen R32 front brake applications, this rotor uses a vented, smooth surface design with a coated hat finish for dependable service in everyday driving and performance-oriented use.
Key Features
- High-carbon alloy construction for improved thermal stability
- Proprietary molybdenum and chromium content helps resist cracking during repeated stop cycles
- Enhanced friction characteristics for stronger brake response
- Increased carbon and chromium content improves oxidation resistance
- Vented rotor design for front axle heat management
- Smooth surface type with coated hat finish
- 5-bolt hole pattern with 112 mm bolt circle and 65 mm center hole
- Outside diameter: 345 mm; nominal thickness: 29.9 mm; discard thickness: 27 mm
Product Details
Centric Premium High Carbon Alloy Disc Brake Rotors are part of the Centric 125 Series, a rotor line focused on metallurgy and dimensional consistency for demanding brake systems. The material blend is formulated to help reduce pad squeal, especially with higher-friction European-style brake pad compounds, while also improving resistance to heat-related stress and surface oxidation. For drivers servicing a Volkswagen Golf R front brake rotor or an Audi S3 front brake rotor, 125.33112 provides the size and construction needed for direct replacement service.
This part cross-references Raybestos Brakes 980471 and Gates 34308 for the same application.
What This Rotor Helps Address
- Brake squeal during normal or aggressive braking
- Rotor cracking from repeated high-performance stops
- Heat buildup in front brake service
- Surface oxidation on exposed rotor areas
- Reduced braking consistency from worn front rotors
Installation Notes
Verify rotor dimensions, hub bore, bolt pattern, and front axle fitment before installation. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition before replacing the rotor. For best results, pair the rotor with quality brake pads matched to the vehicle’s braking system and follow the vehicle manufacturer’s bedding procedure.
Fits 2012-2013 Volkswagen Golf R, front. Fits 2008-2012 Audi S3, front. Fits 2009-2011 Volkswagen CC, front. Fits 2009-2010 Volkswagen Passat CC, front. Fits 2008-2009 Volkswagen Passat, front. Fits 2008 Volkswagen R32, front. Fits 2006-2007 Volkswagen Passat, front 4Motion.
Quality Assurance
Centric designs the 125 Series with advanced alloy metallurgy and coated rotor surfaces to support durability, corrosion resistance, and stable braking performance in front brake applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium High Carbon Alloy Rotor
The Centric 125 Series High Carbon Alloy Disc Brake Rotor is built for front brake applications that demand stable stopping performance and consistent pedal feel. Part number 125.33112 is engineered with high-carbon metallurgy to help reduce brake noise and improve resistance to cracking under repeated hard stops.
Compatible With select Audi S3, Volkswagen Golf R, Volkswagen CC, Volkswagen Passat CC, Volkswagen Passat, and Volkswagen R32 front brake applications, this rotor uses a vented, smooth surface design with a coated hat finish for dependable service in everyday driving and performance-oriented use.
Key Features
- High-carbon alloy construction for improved thermal stability
- Proprietary molybdenum and chromium content helps resist cracking during repeated stop cycles
- Enhanced friction characteristics for stronger brake response
- Increased carbon and chromium content improves oxidation resistance
- Vented rotor design for front axle heat management
- Smooth surface type with coated hat finish
- 5-bolt hole pattern with 112 mm bolt circle and 65 mm center hole
- Outside diameter: 345 mm; nominal thickness: 29.9 mm; discard thickness: 27 mm
Product Details
Centric Premium High Carbon Alloy Disc Brake Rotors are part of the Centric 125 Series, a rotor line focused on metallurgy and dimensional consistency for demanding brake systems. The material blend is formulated to help reduce pad squeal, especially with higher-friction European-style brake pad compounds, while also improving resistance to heat-related stress and surface oxidation. For drivers servicing a Volkswagen Golf R front brake rotor or an Audi S3 front brake rotor, 125.33112 provides the size and construction needed for direct replacement service.
This part cross-references Raybestos Brakes 980471 and Gates 34308 for the same application.
What This Rotor Helps Address
- Brake squeal during normal or aggressive braking
- Rotor cracking from repeated high-performance stops
- Heat buildup in front brake service
- Surface oxidation on exposed rotor areas
- Reduced braking consistency from worn front rotors
Installation Notes
Verify rotor dimensions, hub bore, bolt pattern, and front axle fitment before installation. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition before replacing the rotor. For best results, pair the rotor with quality brake pads matched to the vehicle’s braking system and follow the vehicle manufacturer’s bedding procedure.
Fits 2012-2013 Volkswagen Golf R, front. Fits 2008-2012 Audi S3, front. Fits 2009-2011 Volkswagen CC, front. Fits 2009-2010 Volkswagen Passat CC, front. Fits 2008-2009 Volkswagen Passat, front. Fits 2008 Volkswagen R32, front. Fits 2006-2007 Volkswagen Passat, front 4Motion.
Quality Assurance
Centric designs the 125 Series with advanced alloy metallurgy and coated rotor surfaces to support durability, corrosion resistance, and stable braking performance in front brake applications.
