Centric 125.33156 Disc Brake Rotor - Front
Centric Premium Rotor for Audi TTS Quattro
Centric 125 Series High Carbon Alloy Disc Brake Rotor, part number 125.33156, is built for front brake applications on the 2016-2023 Audi TTS Quattro. It combines a vented, smooth-surface design with high-carbon alloy metallurgy to support consistent braking performance and reduced noise in demanding street use.
The Centric Premium High Carbon Alloy Disc Brake Rotors line focuses on rotor stability, corrosion resistance, and improved friction characteristics for vehicles that use higher-friction European-style pad compounds. For Audi TTS Quattro front brake service, 125.33156 is a direct-fit rotor choice with OE-style dimensions and mounting geometry.
Key Features
- Fits 2016-2023 Audi TTS Quattro, front
- Centric Premium High Carbon Alloy Disc Brake Rotors line
- Part number 125.33156
- Vented rotor with smooth surface type
- High-carbon alloy construction with molybdenum and chromium content
- Coated hat finish for added corrosion resistance
- 5-lug bolt pattern with floating mounting type
- Pillar vane style for heat management
- Outside diameter: 338 mm; nominal thickness: 30 mm; discard thickness: 27 mm
Detailed Description
Centric 125.33156 is a front disc brake rotor engineered for the Audi TTS Quattro platform from 2016 through 2023. Its high-carbon alloy composition is used to improve resistance to cracking during repeated stops and higher-load braking, while also helping reduce oxidation on the rotor surface. The vented pillar-vane design supports heat dissipation, and the coated hat finish helps protect the non-friction areas from corrosion. This rotor is sized with a 338 mm outside diameter, 30 mm nominal thickness, 27 mm discard thickness, and a 112 mm bolt circle to match the specified application.
This part cross-references Audi OE numbers 5Q0615301G and 8S0615301 for the same application.
Common Brake Issues It Can Address
- Brake squeal associated with higher-friction pad compounds
- Rotor cracking during repeated stop-and-go or performance driving
- Reduced braking consistency from heat buildup
- Surface oxidation on exposed rotor areas
- Front brake service needs on Audi TTS Quattro models
Installation Notes and Tips
Verify rotor dimensions, hub bore, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related vibration. Replace pads at the same time if the existing friction material is worn, glazed, or uneven, and follow the vehicle manufacturer’s bedding procedure after installation. Confirm the rotor is installed on the front axle only for the listed application.
Quality Assurance
Centric’s Premium High Carbon Alloy rotor line uses advanced metallurgy and coated surfaces to support durability, corrosion resistance, and stable braking performance in the specified Audi TTS Quattro front brake application.
Centric 125.33156 Disc Brake Rotor - Front
Centric Premium Rotor for Audi TTS Quattro
Centric 125 Series High Carbon Alloy Disc Brake Rotor, part number 125.33156, is built for front brake applications on the 2016-2023 Audi TTS Quattro. It combines a vented, smooth-surface design with high-carbon alloy metallurgy to support consistent braking performance and reduced noise in demanding street use.
The Centric Premium High Carbon Alloy Disc Brake Rotors line focuses on rotor stability, corrosion resistance, and improved friction characteristics for vehicles that use higher-friction European-style pad compounds. For Audi TTS Quattro front brake service, 125.33156 is a direct-fit rotor choice with OE-style dimensions and mounting geometry.
Key Features
- Fits 2016-2023 Audi TTS Quattro, front
- Centric Premium High Carbon Alloy Disc Brake Rotors line
- Part number 125.33156
- Vented rotor with smooth surface type
- High-carbon alloy construction with molybdenum and chromium content
- Coated hat finish for added corrosion resistance
- 5-lug bolt pattern with floating mounting type
- Pillar vane style for heat management
- Outside diameter: 338 mm; nominal thickness: 30 mm; discard thickness: 27 mm
Detailed Description
Centric 125.33156 is a front disc brake rotor engineered for the Audi TTS Quattro platform from 2016 through 2023. Its high-carbon alloy composition is used to improve resistance to cracking during repeated stops and higher-load braking, while also helping reduce oxidation on the rotor surface. The vented pillar-vane design supports heat dissipation, and the coated hat finish helps protect the non-friction areas from corrosion. This rotor is sized with a 338 mm outside diameter, 30 mm nominal thickness, 27 mm discard thickness, and a 112 mm bolt circle to match the specified application.
This part cross-references Audi OE numbers 5Q0615301G and 8S0615301 for the same application.
Common Brake Issues It Can Address
- Brake squeal associated with higher-friction pad compounds
- Rotor cracking during repeated stop-and-go or performance driving
- Reduced braking consistency from heat buildup
- Surface oxidation on exposed rotor areas
- Front brake service needs on Audi TTS Quattro models
Installation Notes and Tips
Verify rotor dimensions, hub bore, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related vibration. Replace pads at the same time if the existing friction material is worn, glazed, or uneven, and follow the vehicle manufacturer’s bedding procedure after installation. Confirm the rotor is installed on the front axle only for the listed application.
Quality Assurance
Centric’s Premium High Carbon Alloy rotor line uses advanced metallurgy and coated surfaces to support durability, corrosion resistance, and stable braking performance in the specified Audi TTS Quattro front brake application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium Rotor for Audi TTS Quattro
Centric 125 Series High Carbon Alloy Disc Brake Rotor, part number 125.33156, is built for front brake applications on the 2016-2023 Audi TTS Quattro. It combines a vented, smooth-surface design with high-carbon alloy metallurgy to support consistent braking performance and reduced noise in demanding street use.
The Centric Premium High Carbon Alloy Disc Brake Rotors line focuses on rotor stability, corrosion resistance, and improved friction characteristics for vehicles that use higher-friction European-style pad compounds. For Audi TTS Quattro front brake service, 125.33156 is a direct-fit rotor choice with OE-style dimensions and mounting geometry.
Key Features
- Fits 2016-2023 Audi TTS Quattro, front
- Centric Premium High Carbon Alloy Disc Brake Rotors line
- Part number 125.33156
- Vented rotor with smooth surface type
- High-carbon alloy construction with molybdenum and chromium content
- Coated hat finish for added corrosion resistance
- 5-lug bolt pattern with floating mounting type
- Pillar vane style for heat management
- Outside diameter: 338 mm; nominal thickness: 30 mm; discard thickness: 27 mm
Detailed Description
Centric 125.33156 is a front disc brake rotor engineered for the Audi TTS Quattro platform from 2016 through 2023. Its high-carbon alloy composition is used to improve resistance to cracking during repeated stops and higher-load braking, while also helping reduce oxidation on the rotor surface. The vented pillar-vane design supports heat dissipation, and the coated hat finish helps protect the non-friction areas from corrosion. This rotor is sized with a 338 mm outside diameter, 30 mm nominal thickness, 27 mm discard thickness, and a 112 mm bolt circle to match the specified application.
This part cross-references Audi OE numbers 5Q0615301G and 8S0615301 for the same application.
Common Brake Issues It Can Address
- Brake squeal associated with higher-friction pad compounds
- Rotor cracking during repeated stop-and-go or performance driving
- Reduced braking consistency from heat buildup
- Surface oxidation on exposed rotor areas
- Front brake service needs on Audi TTS Quattro models
Installation Notes and Tips
Verify rotor dimensions, hub bore, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related vibration. Replace pads at the same time if the existing friction material is worn, glazed, or uneven, and follow the vehicle manufacturer’s bedding procedure after installation. Confirm the rotor is installed on the front axle only for the listed application.
Quality Assurance
Centric’s Premium High Carbon Alloy rotor line uses advanced metallurgy and coated surfaces to support durability, corrosion resistance, and stable braking performance in the specified Audi TTS Quattro front brake application.
